engine oil Citroen C4 PICASSO 2016 2.G User Guide
[x] Cancel search | Manufacturer: CITROEN, Model Year: 2016, Model line: C4 PICASSO, Model: Citroen C4 PICASSO 2016 2.GPages: 527, PDF Size: 13.72 MB
Page 277 of 527
275
C4-Picasso-II_en_Chap07_info-pratiques_ed01-2016
The brake fluid level should be close to the "MA X" mark. If it is not, check
t
he brake pad wear.
Brake fluid level
Changing the fluid
Refer to the manufacturer's service schedule for details of the interval for this operation.
Fluid specification
The brake fluid must conform to the manufacturer's r ecommendations.
Topping-up the engine oil level
The location of the oil filler cap is shown in the
corresponding underbonnet layout view.
F
U
nscrew the oil filler cap to reveal the filler
aperture.
F
A
dd oil in small quantities, avoiding any
s
pills on engine components (risk of fire).
F
W
ait a few minutes before checking the
l
evel again using the dipstick.
F
A
dd more oil if necessary.
F
A
fter checking the level, carefully refit the
o
il filler cap and the dipstick in its tube.
Engine oil change
Refer to the manufacturer's service schedule for details of the interval for this operation.
In
order to maintain the reliability of the engine
a
nd emission control system, never use
additives
in the engine oil.
After
topping-up the oil, the check when
s
witching on the ignition with the oil
l
evel indicator in the instrument panel
is not valid during the 30 minutes after
t
opping up.
Oil grade
Before topping-up the oil or changing the oil, c
heck that the oil is the correct grade for your
e
ngine and conforms to the manufacturer's
r
ecommendations.
7
Practical information
Page 278 of 527
276
C4-Picasso-II_en_Chap07_info-pratiques_ed01-2016
Coolant level
The coolant level should be close
to the "MA X" mark but should never
e
xceed it.
In
addition, as the cooling system is pressurised,
w
ait
at
least one hour after switching off the
e
ngine
before carrying out any work.
To
avoid
any risk of scalding, unscrew the cap
b
y
two
turns to allow the pressure to drop.
W
hen the pressure has dropped, remove the
cap
and
top-up the level.
Fluid specification
The coolant must conform to the
manufacturer's r ecommendations.
The cooling fan may star t after switching
off the engine: take care with ar ticles and
clothing that might be caught by the fan
blades. When the engine is warm, the temperature of
t
he coolant is regulated by the fan.To p p i n g - u p
The reservoir must be topped-up without delay
by
a CITROËN dealer or a qualified workshop.
Diesel fuel additive level
(Diesel with particle filter)
The additive reservoir low level is
indicated by fixed illumination of this
w
arning lamp, accompanied by an
a
udible signal and a message that
t
he particle filter additive level is
too low.
The
warning lamp comes on when the ignition
i
s
switched on, or every time the stalk is
o
perated,
until the reservoir is refilled.
Next
time
you stop, refill the screenwash /
h
eadlamp
wash reservoir.
Screenwash/headlamp
wash level low
In the case of vehicles fitted with
headlamp washers, when the fluid
reservoir low level is reached this
warning
lamp comes on in the
in
strument panel, accompanied by an
audible
signal and a message. Avoid
prolonged contact of used oil or
f
luids with the skin.
Most of these fluids are harmful to
health
or indeed very corrosive.
Do not discard used oil or fluids into
sewers
or onto the ground.
Take
used oil to a CITROËN dealer or
a
qualified workshop (France) or to an
a
uthorised waste disposal site.
Used products
Practical information
Page 279 of 527
277
C4-Picasso-II_en_Chap07_info-pratiques_ed01-2016
Checks
12 V battery
The battery does not require any
maintenance.
However, check that the terminals
a
re clean and correctly tightened,
p
articularly in summer and winter.Refer
to the manufacturer's s
ervice schedule for details of the
replacement intervals for these
components.
Air filter and passenger compartment filter
Replace the oil filter each time the
engine oil is changed.
Refer
to the manufacturer's
s
ervice schedule for details of
the replacement interval for this
component.
Oil filterThe presence of this label, in particular
with the Stop & Start system, indicates
the use of a specific 12 V lead-acid
battery
with special technology and
s
pecification.
T
he involvement of a CITROËN dealer
or
a qualified workshop is essential when
r
eplacing or disconnecting the battery.
Unless
other wise indicated, check these components in accordance with the manufacturer's service schedule and according to your engine.
Other wise, have them checked by a CITROËN dealer or a qualified workshop.
Depending on the environment (e.g. dusty
a
tmosphere) and the use of the vehicle
(e.g. city driving), replace them twice as often
if necessary .
A clogged passenger compartment filter may
h
ave an adverse effect on the per formance
of the air conditioning system and generate u
ndesirable o dours.
Particle filter (Diesel)
The start of saturation of the particle
filter
is indicated by the fixed
i
llumination of this warning lamp
a
ccompanied by a warning message.
As soon as the traffic conditions permit,
regenerate
the filter by driving at a
s
peed of at least 40 mph (60 km/h) until
t
he
warning lamp goes off.
If
the warning lamp stays on, this
i
ndicates a low additive level.
For more information on Checking
levels and the Diesel additive level in
particular,
refer to the corresponding
s
ection.
On a new vehicle, the first particle
filter
regeneration operations may be
a
ccompanied by a "burning" smell,
w
hich is per fectly normal.
Following
prolonged operation of the
v
ehicle at very low speed or at idle,
you
may, in exceptional circumstances,
n
otice the emission of water vapour at
the
exhaust on acceleration. This does
n
ot affect the behaviour of the vehicle
or
the environment.
When
carrying
out
work
on
the
battery,
refer
t
o the " 12 V batter y " section for details of the
precautions
to
be
taken
before
disconnecting
t
he
battery
and
following
its
reconnection.
7
Practical information
Page 280 of 527
278
C4-Picasso-II_en_Chap07_info-pratiques_ed01-2016
Brake wear depends on the style of driving, particularly in the case o
f vehicles used in town, over short
distances.
It may be necessary to have
t
he condition of the brakes checked,
e
ven between vehicle services.
Brake pads
For information on checking brake disc wear, contact a CITROËN dealer
or
a qualified workshop.
Brake disc wear
Only use products recommended by
CITROËN or products of equivalent
quality
an
d
sp
ecification.
In order to optimise the operation of
units as important as those in the
braking
system, CITROËN selects and
o
ffers very specific products.
After
washing the vehicle, dampness,
o
r in wintry conditions, ice can form
on
the brake discs and pads: braking
e
fficiency may be reduced. Make light
b
rake applications to dry and defrost
t
he brakes.
Electric parking brake
For more information, refer to the " Electric
parking brake - Operating faults "
section.
This system does not require any
routine
servicing. However, in the
e
vent of a problem, have the system
checked by a CITROËN dealer or a
q
ualified
w
orkshop.
Manual gearbox
The gearbox does not require any m
aintenance (no oil change).
Refer
to the manufacturer's service
s
chedule for the checking interval for
t
his
c
omponent.
Automatic gearbox
The gearbox does not require any maintenance (no oil change).
Refer
to the manufacturer's service
s
chedule for details of the level
checking
interval for this component.
To
avoid damaging the electrical units,
n
ever use a high pressure jet wash in
t
he engine compartment.
Unless
there is a leak in the circuit, a drop in
t
he brake fluid level indicates that the brake
p
ads are worn.
Practical information
Page 288 of 527
286
C4-Picasso-II_en_Chap08_en-cas-panne_ed01-2016
1. Sealing
Repair procedure
Avoid removing any foreign bodies which have penetrated into the tyre.F
U
ncoil the white pipe G
f
ully.
F
U
nscrew the cap from the white pipe.
F
C
onnect the white pipe to the valve of the
tyre to be repaired.
F
S
witch off the ignition.
F
T
urn the selector A to the "sealant"
position.
F
C
heck that the switch B is in
position "O" . F
C
onnect the compressor's electric plug to
t
he vehicle's 12 V socket.
F
S
tart the vehicle and leave the engine
r
unning.Take care, this product is harmful if s
wallowed and causes irritation to the eyes.
Keep this product out of the reach of
children.Do not start the compressor before
connecting the white pipe to the tyre
v
alve: the sealant product would be
e
xpelled through the pipe.
In the event of a breakdown
Page 292 of 527
290
C4-Picasso-II_en_Chap08_en-cas-panne_ed01-2016
Checking /adjusting tyre pressures
You can also use the compressor without
injecting any product, to check and if necessary
a
djust your tyre pressures.
F
T
urn the selector A to the "Air"
position.
F
U
ncoil the black pipe H
f
ully.
F
C
onnect the black pipe to the
t
yre valve. F
C onnect the compressor's electrical
c
onnector to the vehicle's 12 V socket.
F
S
tart the vehicle and let the engine run.
F
A
djust the pressure using the compressor
(
to inflate: switch B in position "I";
t
o deflate: switch B in position "O" and
press button C ),
according to the vehicle's
t
yre pressure label.
F
R
emove the kit then stow it.Should the pressure of one or more
tyres
be adjusted, it is necessary to
r
einitialise the under-inflation detection
system.
For more information on Under-
inflation detection , refer to the
corresponding
s
ection.
In the event of a breakdown
Page 324 of 527
322
C4-Picasso-II_en_Chap09_caracteristiques-techniques_ed01-2016
Petrol enginePureTech 110 S&SPureTech 130 S&S
Gearbox Manual (6-speed)Manual (6-speed)EAT6 automatic (6-speed)
Model code 3D
3D...
3
E...
3
A...3D...
3
E...
3
A...
HNX...
M/1S
- M/2SMHNY…
M/1S
- M/2SMHNY…
T/1S
- T/2S
Cubic capacity (cc) 1 19 9
Bore
x stroke (mm) 75
x 90.5
Max
power*: EU standard (kW) 96
Max
power engine speed (rpm) 5 500
Max
torque: EU standard (Nm) 230
Max
torque engine speed (rpm) 1 750
Fuel Unleaded
Catalytic converter yes
Engine
oil capacity, with filter replacement
(in litres) 4.25
Petrol engines and gearboxes
3D...:
CITROËN C4 Picasso (5 -seat). 3A...: CITROËN Grand C4 Picasso (7-seat).
3E...: CITROËN Grand C4 Picasso (5 -seat).
* The
maximum power corresponds to the value type-approved on a test bed, under conditions defined in European legislation (Directive 1999/99/EC).
Technical data
Page 325 of 527
323
C4-Picasso-II_en_Chap09_caracteristiques-techniques_ed01-2016
3D...: CITROËN C4 Picasso (5 -seat). 3A...: CITROËN Grand C4 Picasso (7-seat).
3E...: CITROËN Grand C4 Picasso (5 -seat).
* The
maximum power corresponds to the value type-approved on a test bed, under conditions defined in European legislation (Directive 1999/99/EC).
Petrol engine
THP 150 / 160THP 165 S&S
Gearbox EAT6 automatic (6-speed)EAT6 automatic (6-speed)
Model code 3D...
3
E...
3
A...
3D...
3
E...
3
A...
5GX - 5GY...
A-A/1-A/2-A/D-
A/
1D-
A/
2D-Y-Y/1-Y/2
5G Z T/S
Cubic capacity (cc) 1 5981 598
Bore x stroke (mm)
77 x 85.8
77 x 85.8
Max power*: EU standard (kW)
110 / 121
121
Max power engine speed (rpm)
6 000 6 000
Max torque: EU standard (Nm)
240 240
Max torque engine speed (rpm)
1 400 1 400
Fuel UnleadedUnleaded
Catalytic converter yesyes
Engine oil capacity (in litres)
(with filter replacement) 4.25
4.25
9
Technical data
Page 328 of 527
326
C4-Picasso-II_en_Chap09_caracteristiques-techniques_ed01-2016
Diesel engines and gearboxes
.../S: e-HDi model fitted with Stop & Start.
3 D...: CITROËN C4 Picasso (5 -seat).3E...:
CITROËN Grand C4 Picasso (5 -seat).
3A...: CITROËN Grand C4 Picasso (7-seat).
Diesel engine
HDi 115BlueHDi 100 S&S
Gearbox Manual (6-speed)Manual (6-speed)
Model code 3D...
3
E...
3
A...
3D...
3
E...
3
A...
9HC... 8 - 8/1
BHY...
6/1S - 6/2SM
Cubic capacity (cc) 1 5601 560
Bore x stroke (mm)
75 x 88.3
75 x 88.3
Max power*: EU standard (kW)
85 73
Max power engine speed (rpm)
3 600
3 750
Max torque: EU standard (Nm)
270 254
Max torque engine speed (rpm)
1 750 1 750
Fuel DieselDiesel
Catalytic converter yesyes
Particle filter noyes
Engine oil capacity, with filter replacement
(in litres) 3.75
3.75
* The maximum power corresponds to the value type-approved on a test bed, under conditions defined in European legislation (Directive 1999/99/EC).
Technical data
Page 329 of 527
327
C4-Picasso-II_en_Chap09_caracteristiques-techniques_ed01-2016
Diesel engines and gearboxes
.../S: e-HDi model fitted with Stop & Start.
3 D...: CITROËN C4 Picasso (5 -seat).3E...:
CITROËN Grand C4 Picasso (5 -seat).
3A...: CITROËN Grand C4 Picasso (7-seat).
Diesel engine
BlueHDi 115/120 S&SBlueHDi 135/15 0 S&S
Gearbox Manual (6-speed)EAT6 automatic
(6-speed) Manual (6-speed) EAT6 automatic
(6-speed)
Model code 3D...
3
E...
3
A... 3D...
3
E...
3
A... 3D...
3
E...
3
A... 3D...
3
E...
3
A...
BHZ - BHX...
M/S - M/1S
BHZ - BHX...
T/1S - T/2S
AHX-AHR-AHV-AHS...
M/S - M/1S
AHX...
T/S - T/1S
Cubic capacity (cc) 1 5601 997
Bore x stroke (mm)
75 x 88.3
85 x 88
Max power*: EU standard (kW)
85 / 88
11 0
Max power engine speed (rpm)
3 500
3 750
Max torque: EU standard (Nm)
300 370
Max torque engine speed (rpm)
1 750 1 750
Fuel DieselDiesel
Catalytic converter yesyes
Particle filter yesyes
Engine oil capacity, with filter replacement
(in litres) 3.75
6 .1
* The maximum power corresponds to the value type-approved on a test bed, under conditions defined in European legislation (Directive 1999/99/EC).
9
Technical data