ignition Citroen C5 2000 (DC/DE) / 1.G User Guide

Downloaded from www.Manualslib.com manuals search engine 147
INJECTION
FEATURES OF BOSCH ME 7.4.6 MULTIPOINT INJECTION SYSTEM
Summary
(1) Rev counter
(2)Consumption information
(3)Ignition injection test warning lamp
(4) Air conditioning ECU (according to equipment)
(5)Multifunction screen
(6)Built-in systems interface (BSI)
(7) Transponder
(8)Automatic gearbox ECU(according to equipment)
(9 Pump, fuel filter and pressure regulator assembly
(10)Battery
(11)Pressostat
(12)Engine speed sensor
(13)Camshaft position sensors (x2)
(14)Motorised butterfly housing
(15)Canister purge electrovalve
(16)Cooling fan unit
(17)Pencil type ignition coils (x2)
(18) Petrol injectors (x6)(19) Variable timing electrovalves (x2)
(20)Upstream oxygen sensors (x2)
(21) Downstream oxygen sensors (x2)
(22)Engine coolant thermal sensor
(23) Knock sensors (x2)
(24)Power steering pressure sensor
(25) Integral pressure sensor
(26)Accelerator pedal position sensor
(27)Inlet air thermal sensor
(28) Diagnostic connector
(29) Multifunction double relay
(30) Ignition injection ECU
B1HP1B2P

Downloaded from www.Manualslib.com manuals search engine 150
INJECTION
FEATURES OF BOSCH ME 7.4.6 MULTIPOINT INJECTION SYSTEM
Electrical circuit
(diagr.) Component Supplier Reference Observations
30Ignition injection ECU
29Multifunction double relay
(incorporated in the engine fusebox)
24Power steering pressure sensor
27Inlet air thermal sensor
13Camshaft position sensor
23Knock sensor
22Engine coolant thermal sensor
12Engine speed sensor128 way connector, flash eprom type sequential injection
(reprogrammable eprom). Installed in the ECU compartment.
Main relay 1, 16 way grey connector.
Main relay 2, 16 way green connector
Power relay 3, 16 way black connector
Installed in the ECU compartment.
2 way blue connector, switch opens at 20 Bars, for ECU
information (steering wheel on full lock). Ring seal marked
violet, fixed on the power steering 4 way hydraulic union,
beneath the vehicle.
2 way grey connector, fixed on the air filter inlet duct.
3 way grey connector, fixed on the inlet camshaft bearing
cap cover.
3 way green connector, fixed on the central part of the engine
block V.
ESSENTIAL : respect the tightening torque 2 ± 0,2 m.daN.
2 way green connector, fixed on the coolant outlet housing.
Tighten to 2 ± 0.2 m.daN
2 way black connector, fixed on the gearbox clutch casing. BOSCH
SIEMENS
BITRON
JAEGER
ELECTRIFIL
BOSCH
DAV
ELECTRIFIL
ELECTRIFILME 7.4.6
0261206418
S210500000
402 084 01
14 43 25
026123125
402 243 03
14 43 32
14 43 28

Downloaded from www.Manualslib.com manuals search engine 151
INJECTION
FEATURES OF BOSCH ME 7.4.6 MULTIPOINT INJECTION SYSTEM
Ignition circuit
(diagr.) Component Supplier Reference Observations
32Sparking plug
17Pencil type ignition
coils
20Upstream oxygen sensors
21Downstream oxygen sensorsElectrode gap = 1 mm.
Tightening torque 2.5 ± 0.1 m.daN.
4 way black connector
Static type ignition.
4 way green connector.
Front fixing :
On the exhaust manifold.
Rear fixing :
On the front precatalyser.
4 way blue connector.
Fixed on the precatalyser.
Tightening torque 5 ± 0,1 m.daN. BOSCHFGR8MQPE
BAC 1
2526140
258040232 SAGEM
BOSCHExhaust system

Downloaded from www.Manualslib.com manuals search engine 158
INJECTION
FEATURES OF BOSCH HDi DIRECT INJECTION SYSTEM
Component (diagr.) Supplier Reference Observations
88 way connector. Flash eprom type sequential
Ignition injection ECU1BOSCHEDC 15C2 injection (reprogrammable eprom). Installed in the
ECU compartment.
FIRST3 way black connector. Installed in the front RH
Inertia switch34INERTIA Type 505wheelarch, fixed on the suspension mounting.
SWITCHManual rearming in the event of the cut-out system
being activated.
Injection double relay15BITRON 240 10915 way black connector. Installed in the ECU
compartment.
Battery14VA R TAL2 – 12 volts
400 ampsEngine compartment..
Atmospheric pressure sensor13BOSCHIncorporated in the injection ECU.
Central diagnostic socket36In the passenger compartment.
Diagnostic warning lamp35Incorporated in the dashboard instrument panel.
Vehicle speed sensor10EATON On the gearbox.
Preheater warning lamp40Incorporated in the dashboard instrument panel.
Rev counter39Incorporated in the dashboard instrument panel.
Consumption information 38Incorporated in the dashboard instrument panel.
Engine speed sensor2ELECTRIFIL
Camshaft position sensor3ELECTRIFIL Airgap value : 1,2 mm.
Electrical circuit

Downloaded from www.Manualslib.com manuals search engine 163
INJECTION
FEATURES OF BOSCH HDi DIRECT INJECTION SYSTEM
Component (diagr.) Supplier Reference Observations
88 way connector. Flash eprom type sequential
Ignition injection ECU19BOSCHEDC 15C2 injection (reprogrammable eprom). Installed in the
electronic ECUs compartment.
Injection double relay52BITRON 240 10915 way black connector. Installed in the electronic
ECUs compartment.
Battery51VA R TAL2 – 12 volts
Engine compartment.
400 amps
Atmospheric pressure sensor18BOSCHIncorporated in the injection ECU.
Central diagnostic socket50In the passenger compartment.
Diagnostic warning lamp27Incorporated in the dashboard instrument panel.
Vehicle speed sensor53EATON On the gearbox.
Preheater warning lamp26Incorporated in the dashboard instrument panel.
Rev counter24Incorporated in the dashboard instrument panel.
Trip computer23Incorporated in the dashboard instrument panel.
Engine speed sensor60ELECTRIFIL
Camshaft position sensor61ELECTRIFIL Airgap value : 1,2 mm.
Preheater unit57NAGARES 960411P
CARTIER 51299011
Preheater plug62CHAMPION CH170
BERU 0100226344
Electrical circuit

Downloaded from www.Manualslib.com manuals search engine 169
IGNITION
1.8i 16v6FZ FR8ME RFN52HZ
2.0i 16vRFN FR8ME RFN52HZ 1 mm 2.5 m.daN
2.0i HPiRLZ ZR8TPP15
SPARKING PLUGS
Vehicles - Models
BOSCH
Engine typeCHAMPION
EYQUEMElectrode
gapTightening
torque
C5

Downloaded from www.Manualslib.com manuals search engine 196
RECOMMENDATIONS - PRECAUTIONS (AL 4 and 4 HP 20 AUTOMATIC GEARBOXES)
Engines : 6FZ - RFN - RHZ - XFX - 4HX
Towing
The front of the vehicle must be raised in order to be towed.
If the front of the vehicle cannot be raised :
IMPERATIVE : - Put gear lever in position «N».
- Do not add any oil.
AL4 gearbox
- Do not exceed 50 km/h (30mph) over a distance of 50 km (30 m).
4 HP 20 gearbox
- Do not exceed 70 km/h (45mph) over a distance of 100 km (60 m).
Driving.
Never drive with the ignition switched off.
Never push the vehicle to try to start it;
(impossible with an automatic gearbox).
Lubrication
The automatic gearbox is only lubricated when the engine is running.Removing - refitting. (Automatic gearbox).
WARNING : Never place the gearbox on its lower casing
(risk of deforming the tray and damaging the hydraulic valve block).
Never use the connections as handles for raising, turning, holding or
pushing the gearbox.
ESSENTIAL :
- Fit the converter retaining peg while the gearbox is removed.
- Fit the centring peg to locate the gearbox on the engine:
(remove the converter retaining peg just before locating)
WARNING :With the emergency programme selected, an impact is
felt when changing from ‘‘P’’‘‘R’’or ‘‘N’’‘‘R’’.
Precautions to be taken
CLUTCH
GEARBOX
DRIVESHAFTS

Downloaded from www.Manualslib.com manuals search engine 201
CLUTCH
GEARBOX
DRIVESHAFTS
RECOMMENDATIONS - PRECAUTIONS (4 HP 20 AUTOMATIC GEARBOX)
Engines : XFX - 4HX
SHIFT LOCK
The shift lockis a system which locks the gear selection lever in the park position"P".
Unlocking the «shift lock» (normal operation).
Switch on the ignition.
Apply the brake pedal and keep it pressed.
Using the selection lever, disengage from position «P».
Unlocking the «shift lock»(with a fault).
NOTE :It is impossible to unlock the «shift lock»with the «normal operation»method.
The causes of the fault may arise from the following components :
- «Shift lock».
- Gear lever position switch.
- Automatic gearbox ECU.
- Electrical harnesses.
- Battery voltage.
Remove :
- The gear lever knob(1)by pulling upwards.
- The cover (2)(unclip).
- The shutter.
Unlock the «shift lock» (4)using a screwdriver.
Using the selection lever, disengage from position «P».
C5FPOCUDC5FPOCTC

Downloaded from www.Manualslib.com manuals search engine 202
CLUTCH
GEARBOX
DRIVESHAFTS
4 HP 20 GEARBOX CONTROLS
Engines : XFX - 4HX
Selection control.
The gear selection control has 5 positions.
The selection lever is guided by the shape of the stepped gate and by a retaining spring which holds it
towards the left.
The gear selection control is equipped with the «shift lock», so you have to switch on the ignition and
apply the brake pedal to unlock the selection lever from the park position.
Selection (P): Park(locking and immobilisation of the vehicle).
Selection (R): Reverse gear.
Selection (N) : Neutral.
Selection (D): Drive (Use of the four gears in their autoadaptive automatic function).
Selection (M) : Manual (M + M -)allowing the driver to select gears by pulling and pushing the gear lever.
In position M, selection is by an electronic sensor located close to the gear lever.
The variation of flux necessary to the movement of the sensor cells is obtained by a magnet located on
the lever itself. This enables the change of status.
B2CP3DKD