steering wheel adjustment Citroen C5 2000 (DC/DE) / 1.G Owner's Manual

Downloaded from www.Manualslib.com manuals search engine INJECTION
Idling - antipollution 111
Petrol injection 112
Emission standards 113 - 119
Prohibited operations : HDi 120 - 121
Safety requirements : HDi 122 - 123
Checking the fuel supply circuit 124 - 125
Checking the air supply circuit 126 - 130
Exhaust gas recycling 131 - 134
Checking turbo pressure 135 - 138
Features of injection systems 139 - 168
IGNITION
Sparking plugs 169
CLUTCH-GEARBOX
Speedometers 170
Clutch specifications 171 - 172
Gearbox and tyre specifications 173 - 174
BE4/5 gearbox controls 175 - 183
ML/5 gearbox controls 184 - 192
AL4-4HP20 gearbox controls 193 - 203
Driveshafts 204
AXLES-SUSPENSION
Wheels and tyres 205 - 211
Axle geometry 212 - 214
Front and rear axle 215 - 216Suspension 217 - 220
Steering specifications 221 - 222
BRAKES
Brake specifications 223 - 228
Handbrake adjustment 229
Bleeding and filling braking system 230 - 233
HYDRAULICS
Specifications 234 - 237
Suspension spheres 238 - 240
ELECTRICAL
Starter motors 241
Alternators 242
Charging circuit 243
AIR CONDITIONING
Quantities in R 134a aircon system 244
Special features 245
Pollen filter 246
Dryer cartridge 247 - 249
Checking oil level 250 - 251
Checking pressures 252
Air conditioning : 6FN-RFN-RLZ 253
Air conditioning circuit : XFX 254
Air conditioning circuit : RHY-RHZ 255
Air conditioning circuit : 4HX 256
INDEX
GENERAL
Identification of vehicles 1 - 4
General : Dimensions 5 - 6
Weight specifications 7 - 8
Towing specifications 9 - 10
Lifting / supporting the vehicle 11 - 14
Capacities 15 - 18
Lubricants 19 - 32
ENGINES
Engine specifications 34 - 58
Cylinder head marking / tightening
6FZ-RFN-RLZ 38
XFX 51 - 52
RHY-RLZ 55 - 56
4HX 57 - 58
Auxiliaries drive belt 59 - 68
Checking and setting valve timing 69 - 90
Power unit suspension 91 - 95
Exhaust system 96 - 100
Cooling system 101 - 107
Checking oil pressures 108
Oil filter 109
Filling and bleeding engine coolant 110

Downloaded from www.Manualslib.com manuals search engine 165
INJECTION
Electrical circuit (continued)
FEATURES OF BOSCH HDi DIRECT INJECTION SYSTEM
Component (diagr.) Supplier Reference Observations
Built-in systems interface (BSI)33
Cruise control safety switch35
Switching module
(under the steering wheel)37
Fuel cap presence sensor49
FEATURES OF BOSCH HDi DIRECT INJECTION SYSTEM
Fuel circuit
Component (diagr.) Supplier Reference Observations
Recommended fuelDiesel
Fuel temperature sensor65MAGNETI
MARELLIOn the injection rail
Fuel high pressure sensor64BOSCHOn the injection rail
Fuel tank42Capacity = 68 Litres – Polyethylene
Fuel pump44VDOElectric pump immersed in the tank
Voltage : 12 V – Pressure : 2 Bars
Fuel filter
59BOSCHFixing on the engine
Low pressure regulator Adjustment : 2,5 Bars
Fuel cooler58NOBEL
PLASTIQUEFixed under the boyshell

Downloaded from www.Manualslib.com manuals search engine 212
AXLES
SUSPENSION
STEERING
L1
The dimension«L1» for checking front height is between the level of
the front subframe «b» and the wheel axis «a».
This method eliminates all the variations in measurement due to :
Different wheel fiittings.
Vehicle loading.
Wear or incorrect inflation of tyres.
(Measuring from the wheel axis : tool 8006-T)
AXLE GEOMETRY
General adjustment conditions
Rear height Front height
NOTE : After each movement of the vehicle body, and before each mea-
surement :
- Move the vehicle slightly forwards and backwards, by turning the road
wheel by hand.- Check the tyre pressures.
- Release the handbrake.
- Place the manual height control in the «NORMAL» position.
- Engine running.
L2
The dimension«L2»for checking rear height is between the measuring
zone «b» and the wheel axis «a».
H1 = R1 - L1
H1 = Front height(± 6 mm).
R1 =Wheel radius(mm).
L1 = Theoretical dimension between the level of the front subframe and
the wheel axis.H2 = R2 + L2
H2 = Rear height (± 6 mm).
R2 = Wheel radius(mm).
L2 = Theoretical dimension between the measuring zone on the cross-
member support and the wheel axis.

Downloaded from www.Manualslib.com manuals search engine SPECIFICATIONS OF POWER-ASSISTED STEERING
222
Engines : 6FZ - RFN - RLZ - XFX - RHY - RHZ - 4HX
AXLES
SUSPENSION
STEERING
B3EP127D
Engines
Engines
6FZ RFR RJX
RHY RHZ 4HX
XFXZF
SAGINAWFalling
Constant100 bars 129 mm Supplier Flow type Adjustment pressure Pulley diameter Steering rack
travel
(mm)Pinion RackNumber of
turns of the
wheelSteering
ratio
Inner OuterAngle of lock Number of teeth
6FZ RFR
RJX RHY RHZ2x83
XFX 4HX2x74 3 34.29° 31.58°50.4/139.74° 35.65°
9333.3
Tightening torques m.daN
Engines EW-DW ES9J4
(12) Vis(13) Vis
(14) Vis2.2 ± 0.3 2.5 ± 0.6
Engine XFX : A converter, integral with the valve,
modulates the assistance according to the vehicle
speed.
Length of steering rods (Adjustment)
between ball-joints =362 mm.
Power-assisted steering hydraulic circuit.
The oil supplies both the steering circuit and the
suspension circuit. Petrol engine : A power-assisted steering pressure switch
is installed on the hydraulic piping, between the high
pressure pump and the steering valve.