engine Citroen C5 2008.5 (RD/TD) / 2.G User Guide
[x] Cancel search | Manufacturer: CITROEN, Model Year: 2008.5, Model line: C5, Model: Citroen C5 2008.5 (RD/TD) / 2.GPages: 306, PDF Size: 18.9 MB
Page 28 of 306
46
3
C O M F O R T
Control via the manual controls
It is possible to adjust one or more
functions manually, while leaving the
other functions in automatic mode.
Press one of the controls, with
t h e e x c e p t i o n o f t h a t w h i c h r e g u -
lates the temperature 2 . Indicator
lamp A switches off.
Switching to manual mode may result
in discomfort (temperature, humidity,
odour, condensation) and may not
provide optimum (comfort).
To return to automatic mode, press
the "AUTO" control.
3. Air distribution adjustment
Press the controls 3
to change the distri-
b u t i o n o f t h e a i r fl o w . 4. Air conditioning
The air conditioning will only oper-
ate when the engine is running. The
a i r b l o w e r c o n t r o l ( a i r fl o w a d j u s t -
ment) must be active to obtain air
conditioning.
Switching off the ventilation
Turn control 5 to the
l e f t u n t i l t h e fl o w o f a i r
stops.
Press control 4 . Indicator
light B comes on.
5 . A i r fl o w a d j u s t m e n t
Turn control 5 to the
right to increase the
a i r fl o w o r t o t h e l e f t t o
reduce it.
6. Front demisting - de-icing
In certain cases, the
"AUTO" mode may not be
s u f fi c i e n t t o d e m i s t o r d e -
ice the windows (humidity,
several passengers, ice).
Press control 6 to clear the win-
dows quickly. The indicator lamp
comes on.
The
"OFF" symbol is displayed on
the multifunction screen.
This action switches off the display
and the indicator lamps.
It deactivates all of the system's
f u n c t i o n s , w i t h t h e e x c e p t i o n o f t h e
rear screen demisting.
The temperature-related comfort is
no longer controlled (temperature,
humidity, odour, condensation).
Avoid driving for too long with the air
conditioning off.
In order to be effective, the air con-
ditioning must be used with the win-
dows closed.
Deactivating the air conditioning may
result in discomfort (temperature,
humidity, odour, condensation).
The indicator lamps corresponding
to the distribution chosen come on:
- Windscreen and front side win- dows.
- Front ventilation (central and side vents and air diffusion grille
if open) and rear ventilation.
- Front and rear footwells.
Simultaneous display of the distribu-
tion of air to the windscreen and side
windows and of front and rear venti-
lation is not possible. T h e a i r fl o w l e v e l i s i n d i c a t e d b y t h e
progressive lighting of the blocks of
the bar graph on the control panel
display
9 .
To prevent condensation and dete-
rioration of the quality of the air in the
passenger compartment, ensure that
a n a d e q u a t e fl o w o f a i r i s m a i n t a i n e d .
To reactivate the air conditioning:
Press control 1 .
Page 29 of 306
47
3
C O M F O R T
I t c o n t r o l s t h e t e m p e r a t u r e , a i r fl o w
and intake and distributes the ven-
tilation to the windscreen and front
side windows.
R e s u m i n g m a n u a l c o n t r o l e x i t s f r o m
"Demisting" mode. It must be can-
celled to permit renewal of the air
in the passenger compartment and
demisting.
Once the screen is clear, press-
ing control 1 returns the system to
"AUTO" mode.
Press control 7 , with
the engine running, to
demist the rear screen
and the mirrors. The in-
dicator lamp comes on.
Demisting is switched off automatically
t o p r e v e n t a n e x c e s s i v e c o n s u m p t i o n
o f c u r r e n t a n d i n r e l a t i o n t o t h e e x t e r i o r
temperature.
It may be stopped by pressing con-
trol 7 again or when the engine is
switched off.
7. Rear demisting - de-icing
The heated rear screen operates in-
dependently of the air conditioning
system.
8. Intake of exterior air/
Recirculation of interior air
This function enables you to isolate
the passenger compartment from
e x t e r i o r f u m e s a n d o d o u r s . - When starting with the engine
c o l d , t h e fl o w w i l l r e a c h i t s o p -
timum level gradually to pre-
v e n t a n e x c e s s i v e d i s t r i b u t i o n
of cold air.
- When entering the vehicle af- ter it has been parked for a
fairly long period, if the inte-
rior temperature is very differ-
ent from your comfort setting
there is no need to change
the temperature displayed
in order to quickly reach the
level of comfort required. The
system automatically uses its
m a x i m u m p e r f o r m a n c e t o c o r -
rect the difference in tempera-
ture as quickly as possible.
- The water resulting from the air conditioning condensation
is discharged via an open-
ing provided for this purpose;
therefore, a puddle of water
may form underneath the ve-
hicle when stationary.
- In all seasons, if the weather is cool, the air conditioning
is useful as it removes the
humidity from the air and the
condensation. Avoid driving
for prolonged periods with the
air conditioning switched off.
However, demisting resumes when
the engine is switched on again.
S w i t c h o f f t h e r e a r s c r e e n a n d e x t e r i o r
mirrors demisting when you consider
this necessary as low current con-
sumption reduces fuel consumption.
Press control 8 sever-
al times to set the air
intake mode, the indi-
cator lamp comes on.
It must be cancelled as soon as
possible to permit renewal of the
air in the passenger compartment
and demisting.
Page 32 of 306
50
3
C O M F O R T
5 . A i r fl o w a d j u s t m e n t
Press the control:
-
t o i n c r e a s e t h e a i r fl o w ,
- t o r e d u c e t h e a i r fl o w .
T h e a i r fl o w l e v e l i s i n d i -
cated by the progressive
lighting of the fan blade in-
dicator lamps.
R e d u c i n g t h e fl o w t o m i n i m u m
switches the air conditioning OFF.
To prevent condensation and dete-
rioration of the quality of the air in
the passenger compartment, ensure
t h a t a n a d e q u a t e fl o w o f a i r i s m a i n -
tained.
6. Air conditioning
The air conditioning will
only operate when the
engine is running. The air
b l o w e r c o n t r o l ( a i r fl o w a d -
justment) must be active
in order to obtain air con-
ditioning.
Press control 6 . The indicator light
comes on.
In order to be effective, the air condi-
tioning must be used with the windows
closed. 7. Air recirculation - intake of
exterior air
This function enables you
to isolate the passenger
c o m p a r t m e n t f r o m e x t e -
rior fumes and odours.
Intake of air in automatic
anti-pollution mode
This is activated by default
in automatic comfort regu-
lation mode.
The automatic mode has an air qual-
ity sensor. It analyses the air and
isolates the passenger compart-
ment from the outside if it detects
the presence of pollutants. In this
case, it automatically activates the
recirculation of the passenger com-
partment air.
This function does not detect un-
pleasant odours and therefore does
not prevent them from entering the
passenger compartment. It is not
a c t i v e w h e n t h e e x t e r i o r t e m p e r a -
ture is below +5 °C to avoid the risk
of condensation forming inside the
vehicle.
Closing the air intake
Press control 7 to close
t h e e x t e r i o r a i r i n t a k e .
It must be cancelled as soon as pos-
sible to permit renewal of the air in
the passenger compartment and de-
misting.
Intake of exterior air
Press control 7 once
t o o p e n t h e e x t e r i o r a i r
intake.
While retaining the other settings,
this position allows the driver to iso-
l a t e h i m s e l f f r o m u n p l e a s a n t e x t e r i o r
odours and fumes at any time.
Page 33 of 306
51
3
C O M F O R T When starting with the engine
c o l d , t h e fl o w w i l l r e a c h i t s o p t i -
mum level gradually to prevent an
e x c e s s i v e d i s t r i b u t i o n o f c o l d a i r .
When entering the vehicle after it
has been parked for a fairly long
period, if the interior temperature
is very different from your comfort
setting there is no need to change
the temperature displayed in or-
der to quickly reach the level of
comfort required. The system
a u t o m a t i c a l l y u s e s i t s m a x i m u m
performance to correct the differ-
ence in temperature as quickly as
possible.
The water resulting from the air
conditioning condensation is dis-
charged via an opening provided
for this purpose; therefore, a pud-
dle of water may form underneath
the vehicle when stationary.
In all seasons, if the weather is
cool, the air conditioning is use-
ful as it removes the humidity
from the air and the condensa-
tion. Avoid driving for prolonged
periods with the air conditioning
switched off.
9. Front demisting - de-icing
In certain cases, the
"AUTO" mode may not be
s u f fi c i e n t t o d e m i s t o r d e -
ice the windows (humidity,
several passengers, ice).
Press control 9 to clear the win-
dows quickly. The indicator light
comes on.
This system controls the temperature,
a i r fl o w a n d i n t a k e a n d d i s t r i b u t e s t h e
ventilation to the windscreen and front
side windows.
R e s u m i n g m a n u a l c o n t r o l e x i t s f r o m
the "Demisting" mode. It must be
cancelled as soon as possible to
permit renewal of the air in the pas-
senger compartment and demisting.
Pressing one of the controls 1a and
1b returns the system to the "AUTO"
mode.
8. Rear demisting - de-icing
S w i t c h o f f t h e r e a r s c r e e n a n d e x t e r i o r
mirrors demisting when you consider
this necessary as low current con-
sumption reduces fuel consumption. The heated rear screen
operates independently
of the air conditioning
system.
Press control 8 , with the en-
gine running, to demist the rear
screen and the mirrors. The indi-
cator light comes on.
Demisting is switched off automatically
t o a v o i d e x c e s s i v e c o n s u m p t i o n o f
c u r r e n t a n d d e p e n d i n g o n t h e e x t e r i o r
temperature.
It may be stopped by pressing con-
trol 8 again or when the engine is
switched off.
In this latter case, the demisting
resumes if the engine is switched on
again within one minute.
Page 34 of 306
52
3
C O M F O R T
PROGRAMMABLE HEATING *
With the engine off, programmable
heating preheats the coolant circuit
in order to optimise the engine op-
erating temperature prior to starting.
The programmable heating sys-
tem can be started immediately or
delayed thanks to its programming
function. With the engine idle or the vehicle
stationary, it is normal to hear a
high-pitched whistling noise and
to notice some smoke/emissions. Digital programmer
The heating system’s programmer is
located on the right-hand side of the
dashboard.
1. Time or remaining functioning
time.
2. Increase (time).
3. Select programme.
4. Programme number selected.
5. Immediate start-up of heating.
6. Time adjustment and reading
warning lamp.
7. Reduce (time).
8. Heating mode warning lamp.
9. Programmable heating system
warning lamp.
Page 38 of 306
56
3
C O M F O R T
FRONT SEATS MANUAL ADJUSTMENTS
1. Adjustments to the height and
angle of the head restraint
To raise it, pull upwards.
To lower it, press on the control A
to unlock it, and simultaneously
on the head restraint itself. The
adjustment is correct when the
top edge of the head restraint is at
the same height as the top of the
head. It is also tilt adjustable.
To raise it, press control A to
unlock it, then pull it upwards. It
may be necessary to adjust the
backrest angle.
2.
Adjustment of the backrest angle
Operate the control and adjust
the position of the backrest to
the front or to the rear.
3. Adjustment of the seat height
Raise or lower the control the number of times required to
obtain the desired position.
4. Longitudinal adjustment of seat
Lift the control bar and adjust to the desired position.
5. Adjustment of lumbar support
Turn the control and adjust to the desired position.
6. Heated seat controls
The heated seats only operate when the engine is running.
Seat consisting of a seat cushion, seat back and head restraint
which can all be
adjusted for optimum driving comfort.
For your safety, do not drive with
the head restraints removed; they
must be in place and correctly
adjusted.
Page 39 of 306
57
3
C O M F O R T
FRONT SEATS
ELECTRIC ADJUSTMENTS
To adjust the electric seats, switch on the ignition or start the engine if the vehicle
has gone into economy mode.
Seat adjustments are also possible for a short period after ope ning one of the
front doors or switching off the ignition.
2. Adjustment of the backrest
angle
Move the control forwards or backwards to adjust the backrest
angle.
3. Adjustment of the angle of the
top of the backrest
Move the control forwards or backwards to adjust the angle of
the top of the backrest.
1. Adjustment of the seat height
and angle, and longitudinal
adjustment
Raise or lower the front of the
control to adjust the seat cushion
angle.
Raise or lower the rear of the
control to raise or lower the seat.
Simultaneously raise or lower
the front and rear of the control
in order to raise or lower the
entire seat.
4. Adjustment of lumbar support
This function allows you to inde- pendently adjust the height and
level of lumbar support.
Move the control:
Forwards or backwards to in-
crease or reduce the lumbar
support.
Upwards or downwards to raise or
lower the lumbar support zone.
Heated seats control
With the engine running, the front seats can operate separately.
Use the corresponding adjust-ment dial, placed on the outer side of each front seat, to switch on and select the level of heating required:
0 : Off.
1 : Low.
2 : Medium.
3 : High.
Page 40 of 306
58
3
C O M F O R T
This function provides the driver with a back massage. It only operates when the engine is running.
Press on button A .
The warning lamp comes on and the massage function is activated for a period of 1 hour. During this time, massage is performed in cycles of 6 minutes (4 minutes of massage fol-lowed by 2 minutes break). In total, the system will perform 10 cycles.
After 1 hour, the function is deacti-vated. The warning lamp goes out.
Massage function The Welcome function The welcome function assists entry
and leaving the vehicle.
After switching off the ignition and
opening the driver’s door, the seat
moves back automatically and then
stays in this position, ready for the
n e x t e n t r y t o t h e v e h i c l e .
When switching on the ignition, the
seat moves forward to the memo-
rised driving position.
When moving the seat, take care
that no person or object hinders the
automatic movement of the seat.
This function is deactivated by de-
fault. You may activate or deactivate
this function using the "Main Menu"
on the instrument panel screen. To
do so, select "Vehicle parameters/
Comfort/Driver welcome".
Deactivation
You can deactivate the massage function at any time by pressing on button A .
Head restraint height and
angle adjustments on electric
seats
To adjust the angle of the head
restraint, push back or pull for-
ward section C of the head
restraint until you reach the
desired position.
To raise it, pull upwards.
To lower it, press on the
control D to unlock it, and simul-
taneously on the head restraint
itself.
To remove it, press on the
control D to unlock it, then pull it
upwards.
Page 41 of 306
59
3
C O M F O R T
Storing driving positions
System which takes into account the
s e t t i n g s o f t h e d r i v e r ' s s e a t , e x t e r i o r
mirrors and air conditioning. It ena-
bles you to store up to two positions
using the buttons on the side of the
driver's seat. Storing a position
Using buttons M/1/2
Switch on the ignition.
A d j u s t y o u r s e a t a n d y o u r e x t e -
rior mirrors.
Press button M , then press but-
ton 1 or 2 within four seconds.
An audible signal is heard in- dicating that the settings have
been stored.
Storing a new position cancels the
previous position.
Recalling a stored position
Ignition on or engine running
B r i e fl y p r e s s b u t t o n 1 or 2 to re-
call the corresponding position.
An audible signal is heard indicating
the end of the adjustment.
When the ignition is on, after a few
consecutive position recalls, the
function will be deactivated until the
engine is started, to prevent dis-
charging of the battery. For your safety, avoid storing a
driving position while driving.
REAR HEAD RESTRAINTS
The rear head restraints can be
removed and have two positions;
- high, position for use,
- low, storage position.
To raise a head restraint, pull it
upwards.
To lower it, press the lug then the
head restraint.
To remove it, place it in the high
position, push the lug and pull it
upwards.
T o r e fi t i t , e n g a g e t h e h e a d r e s t r a i n t
rods in the holes taking care to
remain in the centreline of the seat
back.
Never drive with the head restraints
removed, they must be in place
and correctly adjusted.
Page 42 of 306
59
3
C O M F O R T
Storing driving positions
System which takes into account the
s e t t i n g s o f t h e d r i v e r ' s s e a t , e x t e r i o r
mirrors and air conditioning. It ena-
bles you to store up to two positions
using the buttons on the side of the
driver's seat. Storing a position
Using buttons M/1/2
Switch on the ignition.
A d j u s t y o u r s e a t a n d y o u r e x t e -
rior mirrors.
Press button M , then press but-
ton 1 or 2 within four seconds.
An audible signal is heard in- dicating that the settings have
been stored.
Storing a new position cancels the
previous position.
Recalling a stored position
Ignition on or engine running
B r i e fl y p r e s s b u t t o n 1 or 2 to re-
call the corresponding position.
An audible signal is heard indicating
the end of the adjustment.
When the ignition is on, after a few
consecutive position recalls, the
function will be deactivated until the
engine is started, to prevent dis-
charging of the battery. For your safety, avoid storing a
driving position while driving.
REAR HEAD RESTRAINTS
The rear head restraints can be
removed and have two positions;
- high, position for use,
- low, storage position.
To raise a head restraint, pull it
upwards.
To lower it, press the lug then the
head restraint.
To remove it, place it in the high
position, push the lug and pull it
upwards.
T o r e fi t i t , e n g a g e t h e h e a d r e s t r a i n t
rods in the holes taking care to
remain in the centreline of the seat
back.
Never drive with the head restraints
removed, they must be in place
and correctly adjusted.