change wheel Citroen C5 2008.5 (RD/TD) / 2.G Owner's Manual
[x] Cancel search | Manufacturer: CITROEN, Model Year: 2008.5, Model line: C5, Model: Citroen C5 2008.5 (RD/TD) / 2.GPages: 306, PDF Size: 18.9 MB
Page 20 of 306
38
2
M U L T I F U N C T I O N D I S P L A Y S
Adjusting the brightness and
contrast
Press on A .
Use C to select the "Brightness -
v i d e o a d j u s t m e n t " m e n u . C o n fi r m
with a press on C on the steering
wheel or D on the audio equip-
ment.
S e l e c t t h e c o n fi g u r a t i o n o f t h e
screen using C . C o n fi r m w i t h a
press on C on the steering wheel
or D on the audio equipment.
Select the brightness setting.
C o n fi r m w i t h a p r e s s o n C on the
steering wheel or D on the audio
equipment.
Select the inverse or normal dis-
play mode using C then validate
with a press on C on the steering
wheel or D on the audio equip-
ment. To adjust the brightness
select "+" or "-" and save your
setting with a press on C .
C o n fi r m w i t h "OK" on the
screen. Adjusting the date and the
time
Press on A .
Use C to select the "Adjusting
the date and time" menu, then
c o n fi r m y o u r c h o i c e w i t h a p r e s s
on C on the steering wheel or D
on the audio equipment.
S e l e c t t h e s c r e e n c o n fi g u r a t i o n
using C . C o n fi r m w i t h a p r e s s o n
C on the steering wheel or D on
the audio equipment.
Select the adjustment for the
date and the time, using B .
C o n fi r m w i t h a p r e s s o n C on the
steering wheel or D on the audio
equipment.
Press C to select the values you
w i s h t o m o d i f y . C o n fi r m y o u r
choice with a press on C on the
steering wheel or D on the audio
equipment.
C o n fi r m w i t h "OK" on the
screen. Choosing the units
Press on A .
Use C to select the "Choice of
temperature units" menu, then
c o n fi r m y o u r c h o i c e w i t h a p r e s s
on C on the steering wheel or D
on the audio equipment.
Using C , select the unit then val-
idate with a press on C on the
steering wheel or D on the audio
equipment.
C o n fi r m w i t h "OK" on the
screen.
Selection of the type of
information displayed (Mode)
Successive presses on the end of
the wiper stalk or on the MODE but-
ton on the audio equipment permit
selection of the type of informa-
tion presented on the multifunction
screen (date or radio, CD, MP3 CD,
CD changer).
Page 26 of 306
44
3
C O M F O R T
Air conditioning
We recommend use of the automatic
regulation of the air conditioning.
It permits automatic and optimised
control of all of the following func-
t i o n s : a i r fl o w , t e m p e r a t u r e i n t h e
passenger compartment and air
distribution, by means of various
s e n s o r s ( e x t e r i o r t e m p e r a t u r e , s u n -
shine). This eliminates any need for
you to change your settings other
than the temperature value dis-
played.
Please do not block the sunshine
sensor A .
If you select the automatic mode (by
pressing the "AUTO" control) and
leave all of the vents open, optimum
comfort will be maintained and humid-
ity and condensation will be removed
r e g a r d l e s s o f t h e e x t e r i o r c l i m a t i c c o n -
ditions.
The temperature in the passenger
compartment can only be lower than
t h e e x t e r i o r t e m p e r a t u r e i f t h e a i r
conditioning is on.
VENTILATION, HEATING AND AIR CONDITIONING RECOMMENDATIONS
In order to be effective, the air condi-
tioning must be used with the windows
closed. If the vehicle has been parked
in the sun for a long period and the in-
terior temperature is very high, venti-
late the passenger compartment with
the windows open for a few minutes,
then close the windows.
To keep the air conditioning system
in good working order it is essential
that it is operated at least once a
month.
The air conditioning uses the engine
power during its operation. As a result,
the fuel consumption of the vehicle in-
creases.
In certain cases of particularly ardu-
o u s u s e ( e . g . t o w i n g t h e m a x i m u m
load on a steep gradient in high tem-
peratures), switching off the air condi-
tioning permits the recovery of engine
power and therefore increases the
towing capacity.
Air inlet
C h e c k t h a t t h e e x t e r i o r g r i l l e f o r t h e
air inlet, at the bottom of the wind-
screen, is clean and free of dead
leaves, snow, etc.
When washing the vehicle using a
high pressure nozzle, avoid spray-
ing at the air inlet. Air circulation
M a x i m u m c o m f o r t i s o b t a i n e d b y
means of a good distribution of air in
the passenger compartment, both in
the front and in the rear.
To obtain a uniform distribution of
a i r , t a k e c a r e n o t t o b l o c k t h e e x -
terior air intake grille located at the
base of the windscreen, the vents,
the air outlets under the front seats
a n d t h e a i r e x t r a c t o r l o c a t e d b e h i n d
t h e fl a p s i n t h e b o o t .
T h e f r o n t a n d r e a r v e n t s a r e fi t t e d
with thumbwheels to adjust the air
fl o w a n d d i r e c t i o n . W e r e c o m m e n d
that you leave all of the vents open.
Dust filter/Odour filter
(active carbon)
T h e r e i s a fi l t e r f o r e x c l u d i n g o d o u r s
and dust.
T h i s fi l t e r h a s t o b e c h a n g e d i n a c -
cordance with the vehicle mainte-
nance schedule (see: "Maintenance
and Warranty Guide").
Page 94 of 306
98
6
L A Y O U T
BOOT LAYOUT (SALOON)
1. Battery for vehicles with V6 HDi
engine.
2. Pull strap (spare wheel storage).
3. Boot lamp.
4. 6 CD changer. Luggage securing rings
Use the 4 securing rings on the
b o o t fl o o r t o s e c u r e y o u r l u g -
gage.
For safety reasons in the event of
sharp braking, you are advised to
place heavy objects as far forward
in the boot as possible.
Page 106 of 306
110
8
S A F E T Y
DIRECTIONINDICATORS
Lower the lighting stalk fully
when moving to the left.
Raise the lighting stalk fully when
moving to the right.
"Motorway" function
System for indicating a change of
lane on a motorway.
M o v e t h e s t a l k b r i e fl y u p w a r d s
or downwards, without going
beyond the resistance point;
t h e d i r e c t i o n i n d i c a t o r s w i l l fl a s h
3 times.
This function can be used at any
speed, but it is particularly useful
when changing lane on high-speed
roads.
HAZARD WARNING LAMPS
A visual warning by means of the di-
rection indicators to alert other road
users to a vehicle breakdown, towing
or accident.
Automatic lighting of hazard
warning lamps
When braking in an emergency,
depending on the deceleration, the
hazard warning lamps come on.
They will switch off automatically the
fi r s t t i m e y o u a c c e l e r a t e .
If they do not, press button A to
switch the direction indicators
off. Audible warning to alert other road
users to an imminent danger.
Selection of the left or right direction
indicators to signal a change of direc-
tion of the vehicle.
Press the button, the direction
i n d i c a t o r s fl a s h .
They can operate with the ignition
off.
A s a s a f e t y p r e c a u t i o n i n a t r a f fi c
jam, switch on the hazard warn-
ing lamps if you are the last in the
queue.
Press the left or right-hand part
o f t h e fi x e d c e n t r e d c o n t r o l s
steering wheel.
Use the horn moderately and only
in the following cases:
- immediate danger,
- when approaching an area
- where there is no visibility.
Page 148 of 306
147
9
D R I V I N G
Vehicle positions
Maximum height
Changing a wheel (Not possible if
speed > 6 mph (10 km/h)).
Intermediate position
For an increased ground clearance
(Not possible if speed > 25 mph
(40 km/h)).
F o r u s e o n d i f fi c u l t r o a d s w h e n t r a v -
elling at reduced speed, as well as
on car park ramps.
Position changes may only be
made when the engine is running.
Adjustable ground clearance re-
sponds to all types of situation.
A p a r t f r o m a f e w s p e c i fi c s i t u a t i o n s ,
driving in the normal road position is
imperative.
Press once on one of the adjust-
ment controls.
The change in position is indicated
by a message on the instrument
panel screen.
Normal position
If the speed authorised for a particu-
l a r p o s i t i o n i s e x c e e d e d , t h e v e h i c l e
reverts automatically to the normal
position.
Minimum height
To facilitate loading or unloading the
vehicle.
For workshop inspections.
Not to be used in normal driving (Not
possible if speed > 6 mph (10 km/h)).
Page 167 of 306
167
11
P R A C T I C A L I N F O R M A T I O N
Wheel for temporary use
Y o u r v e h i c l e m a y b e fi t t e d w i t h a
spare wheel which is different to
t h o s e o n t h e v e h i c l e . W h e n fi t t i n g
the spare wheel, it is normal to no-
tice that the wheel bolt washers do
not come into contact with the wheel
rim. The spare wheel is secured by
the conical tapering of the wheel
bolt’s shaft.
W h e n r e fi t t i n g t h e o r i g i n a l w h e e l ,
ensure that the wheel bolt contact
surfaces are clean and in good con-
dition. Fitting a wheel
Fit the wheel on the hub, using
the centring guide. Make sure
that the contact surface between
the hub and the wheel is clean.
Screw in the bolts but do not fully
tighten them.
Lower the jack and remove it.
Tighten the wheel bolts, using
the wheelbrace.
R e fi t t h e p r o t e c t o r s o n t h e b o l t s .
Return the ground clearance to
the normal position.
Ensure the tyre pressure is cor-
rect and have the balancing
checked.
Deflation detection
These wheels have tyre pressure
sensors. It is essential to have re-
pairs carried out by a CITROËN
dealer.
Anti-theft bolts
Each wheel is equipped with one
anti-theft bolt.
To remove it:
Remove the protector using tool 3 .
Use the anti-theft socket with the
wheelbrace. I f y o u r v e h i c l e i s fi t t e d w i t h
a spare wheel of a different
size to those on the vehi-
c l e , y o u m u s t n o t e x c e e d 5 0 m p h
(80 km/h) whilst using the spare
wheel.
T h e w h e e l b o l t s a r e s p e c i fi c t o t h e
type of wheel.
If the type of wheel is changed,
check with your CITROËN dealer
that the wheel bolts are compatible
with the new wheels.
Take care to note down the code
number engraved on the head of
the anti-theft bolt socket. This will
enable you to obtain a replace-
ment anti-theft bolt socket from a
CITROËN dealer .
Page 168 of 306
167
11
P R A C T I C A L I N F O R M A T I O N
Wheel for temporary use
Y o u r v e h i c l e m a y b e fi t t e d w i t h a
spare wheel which is different to
t h o s e o n t h e v e h i c l e . W h e n fi t t i n g
the spare wheel, it is normal to no-
tice that the wheel bolt washers do
not come into contact with the wheel
rim. The spare wheel is secured by
the conical tapering of the wheel
bolt’s shaft.
W h e n r e fi t t i n g t h e o r i g i n a l w h e e l ,
ensure that the wheel bolt contact
surfaces are clean and in good con-
dition. Fitting a wheel
Fit the wheel on the hub, using
the centring guide. Make sure
that the contact surface between
the hub and the wheel is clean.
Screw in the bolts but do not fully
tighten them.
Lower the jack and remove it.
Tighten the wheel bolts, using
the wheelbrace.
R e fi t t h e p r o t e c t o r s o n t h e b o l t s .
Return the ground clearance to
the normal position.
Ensure the tyre pressure is cor-
rect and have the balancing
checked.
Deflation detection
These wheels have tyre pressure
sensors. It is essential to have re-
pairs carried out by a CITROËN
dealer.
Anti-theft bolts
Each wheel is equipped with one
anti-theft bolt.
To remove it:
Remove the protector using tool 3 .
Use the anti-theft socket with the
wheelbrace. I f y o u r v e h i c l e i s fi t t e d w i t h
a spare wheel of a different
size to those on the vehi-
c l e , y o u m u s t n o t e x c e e d 5 0 m p h
(80 km/h) whilst using the spare
wheel.
T h e w h e e l b o l t s a r e s p e c i fi c t o t h e
type of wheel.
If the type of wheel is changed,
check with your CITROËN dealer
that the wheel bolts are compatible
with the new wheels.
Take care to note down the code
number engraved on the head of
the anti-theft bolt socket. This will
enable you to obtain a replace-
ment anti-theft bolt socket from a
CITROËN dealer .
Page 218 of 306
215
OFF
LIMIT
CRUISE
05
LIST MENU
4
2
3
51
6
7
8
9
9
10
STEERING WHEEL CONTROLS
1. Activation/deactivation of the Black Panel mode (night driving).
2. Pick up an incoming call/hang up a call which is
in progress. Open the telephone menu and display the call list. Long press: refuse an incoming call.
3. Access to the short-cut menus in accordance with the display on the screen. C o n fi r m a t i o n o f t h e f u n c t i o n s e l e c t e d f r o m a m e n u . Rotation: S e l e c t i o n o f t h e p r e v i o u s / n e x t s t o r e d R A D I O s t a t i o n . S e l e c t i o n o f t h e p r e v i o u s / n e x t C D o r M P 3 d i r e c t o r y . S e l e c t i o n o f t h e p r e v i o u s / n e x t C D i n t h e C D c h a n g e r .
4. Abandon the current operation. Reject an incoming call. Long press: return to the main display.
5. Access to the main menu.
6. Volume increase.
7. Volume decrease.
8. Mute.
9. RADIO: automatic search for a lower/higher frequency. CD/MP3/CD CHANGER: s e l e c t i o n o f t h e p r e v i o u s / n e x t t r a c k . continuous press: fast forward/rewind play.
10. RADIO: display the list of stations available. Long press: update the list of radio stations. CD/MP3/CD CHANGER: display the list of CD and directory tracks.