fold seats Citroen C5 2008 (RD/TD) / 2.G Owner's Manual

123
III
33
44
1
1
22
The cargo net can be used behind the rear seats (row 2) when the luggage-cover blind is not fi tted, or behind the front seats (row 1).
Note : when using behind the front seats, the backrests and the seat cushions must be folded down (see section on rear seats).
CARGO NET (TOURER)
To install :
Fold down the backrests of the rear seats.
Position the cargo net roller over the two rails 1 located behind the rear seats (2/3 benchseat). The two notches 2 must be posi-tioned over the two rails.


Slide the 2 rails 1 into the notches 2 and push the roller (lengthwise) from right to left to lock it in.Put the backrests of the rear seats back into place.


To use in row 1 :
Fold down the backrests of the rear seats.
Open the cov-ers 3 of the corresponding high fi xing locations.


To use in row 2 :
Open the cov-ers 4 of the c o r r e s p o n d -ing high fi xing locations.
From the rear benchseat, unroll the cargo net by pushing it to disengage the retaining notches.
Position one of the ends of the cargo net’s metal bar in the corre-sponding fi xing location. Ensure that the notch is correctly lodged in the rail located inside the loca-tion 4.
Position the other notch in the 2nd fi xing location and pull the metal bar towards you.




Unroll the cargo net and posi-tion one of the ends of the net’s metal bars in the corresponding fi xing location. Ensure that the notch is correctly lodged in the rail located inside the location 3.
Pull on the cargo’s net’s metal bar to position the other notch in the 2nd fi xing location.