Citroen C6 DAG 2007 1.G User Guide
Manufacturer: CITROEN, Model Year: 2007, Model line: C6 DAG, Model: Citroen C6 DAG 2007 1.GPages: 216, PDF Size: 7.61 MB
Page 11 of 216
I
14
A
B
IN BRIEF
LIGHTING
Ring A
Sidelamps.
Dipped beams/main beams.
Lamps off.
Pull the control stalk towards youto change between dipped beam and main beam.
Front foglamps and rear foglamps on.
Front foglamps on.
Switching off
First action rearwards, rear foglamps off.
Second action rearwards, front and rear foglamps off.
Ring B
WIPERS
Control positions2. Rapid wipe.1. Normal wipe.I. Intermittent wipe.0. Off.
One press downwards:AUTO:Automatic wipe activated.
Single wipe.
Page 12 of 216
II
1515
1
2
3
4
1
2
3
4
A
IN BRIEF
This system allows you to main-tain a constant vehicle speed pro-grammed by the driver.1. “CRUISE” button: Activation/deactivation of cruise control mode.2. Suspension or reactivation of cruise control.3. “SET +” button: Increase of the memorised speed.4. “SET -” button: Reduction of the memorised speed.
CRUISE CONTROLSPEED LIMITER
This system allows you to choose a maximum speed that you do not wish to exceed.1. “LIMIT” button: Activation of speed limiter mode.2. Disengagement of the maxi-mum speed.3. “SET +” button: Activation of the maximum speed.4.“SET -” button: Reduction of the maximum speed.
To quit a parking space
With the engine running, release the electric parking brake, by pressing the brake pedal or the accelerator pedal and pulling then releasing the control A.
To park
With the vehicle stationary, operate the parking brake by pulling then releasing the control A.
ELECTRIC PARKING BRAKE
383672
Note: It is not possible to release the electric parking brake if the key is removed or in position S.
Note: Function may be activated at speeds over 30 km/h (18 mph).Cruise control is available in the higher gears only, for speeds greater than 40 km/h (24 mph).
D R I V I N G
Page 13 of 216
I
16
P
R
N
A
A
D
M
IN BRIEF
Reverse gear
Lift the collar A to engage reverse gear.
Do not select reverse gear until the vehicle is completely stationary.
Depress the clutch pedal and wait a few moments before gently engag-ing reverse gear.
Position P: Parking.Position R: Reverse gear.
Position N: Neutral.
Position D:Operation in auto-matic mode.Position M:Operation in sequential mode.
Page 14 of 216
II
1717
AB
IN BRIEF
You can activate/deactivate the parking assistance by pressing button A. When the parking assist-ance is inactive, the warning lamp on button A is lit up.
PARKING ASSISTANCELANE DEPARTURE WARN-ING SYSTEM
This driving assistance device warns you when you unwittingly cross a lane marking (either a con-tinuous or a dotted line on the road s u r f a c e ) . I t i s d e s i g n e d f o r u s e o n motorways and dual carriageways, operating only above speeds of a p p r o x . 8 0 k m / h ( 5 0 m p h ) .
A press on button B activates the function, the warning lamp on the button lights up.
HEAD-UP DISPLAY
The Head-up display projects essential driving data into the d r i v e r ' s fi e l d o f v i s i o n . T h i s e n a b l e s the driver never to take his eyes off the road.
The controls for the Head-up dis-play are located beneath the air vent on the driver's side.
807755
D R I V I N G
Page 15 of 216
I
18
IN BRIEF
AUTOMATIC AIR CONDITIONING
Adjustment of air distribu-tion on driver's side
Adjustment of air distribution on passenger's side
Adjustment of tempera-ture on driver's side
Adjustment of tempera-ture on passenger's side
Automatic operation
Air recirculation – Entry of air from outsideDeicing – Demisting of rear screen and exterior rear view mirrors
Front demisting - deicing
A d j u s t i n g t h e a i r fl o w
Note: It is recommended to use automatic mode by pressing on the “AUTOIt is recommended to use automatic mode by pressing on the “It is recommended to use automatic mode by pressing on the “” button.
60- 85
V E N T I L A T I O N
Page 16 of 216
II
1919
A
STOP
KJIHGFE
DB
B
CA
ML
B
IN BRIEF
Note:When the ignition is switched on, the orange and red warning lamps light up.When the engine is running, these warning lamps should go out.
If any warning lamps remain lit, refer to the Ifrelevant page.
Page 17 of 216
I
20
12
3
IN BRIEF
SEAT BELTS WARNING LAMPTYRE DEFLATION DETECTION
T h i s f u n c t i o n w a r n s y o u o f t y r e s t h a t a r e d e fl a t e d o r p u n c t u r e d .
T y r e d e fl a t i o n a l e r t : The SERVICE warning lamp comes on and a vehicle outline is displayed.
“Puncture”: The “STOP” a n d t y r e ( s ) p u n c t u r e d w a r n i n g l a m p s l i g h t u p , a n d a vehicle outline is displayed.
Colour screen CNaviDrive colour display
Display of tyres in good condition
T y r e v e r y d e fl a t e d
T y r e d e fl a t e d
“Puncture”
31- 65
The driver's and the front and rear passengers' seats have sensors that detect non-fastening/unfas-tening of the seat belts.
The fastened/non-fastened status of the seat belts for each type of seat is indicated by the illumination o r fl a s h i n g o f t h e w a r n i n g l a m p s 1, 2 and 3.
M O N I T O R I N G
Page 18 of 216
II
2121
D
C
E
B
A
IN BRIEF
FRONT PASSENGER'S AIR-BAG DEACTIVATIONCHILD SAFETYTHE ISOFIX FASTENING SYS-TEM
In order to be able to use a rear-facing child seat in the front pas-senger's seat position, it is impera-tive to deactivate the passenger's airbag.
For that:With the ignition switched off, insert the key into the switch A.Turn the key to the “OFF” posi-tion, the passenger's airbag is deactivated.
The front passenger's airbag deac-tivation warning lamp, in the instru-ment panel, lights up when you switch on the ignition.
Page 19 of 216
22
II
W I P E R S
CONTROL POSITIONS2: Rapid wipe.
1: Normal wipe.
I: Intermittent wipe.0: Off.
One press downwards:AUTO:Automatic wipe activated.Single wipe.
Page 20 of 216
23
II
W I P E R S
CHANGING THE WIPER BLADES
If you have to replace them, the wiper blades have to be parked in the maintenance position. For this, switch off the ignition and then within one minute move the wiper control stalk. The wipers stand up in a vertical position.
After replacement, switch on the ignition and move the wiper control stalk so that the wipers resume their normal position.Note: t h i s a c t i o n p l a c e s t h e P i l o t e d D e fl e c t o r i n t h e m a i n t e n a n c e p o s i t i o n . S e e “ P i l o t e d D e fl e c t o r ” .
WINDSCREEN WASH
To operate the windscreen wash, pull the wiper stalk towards you.
The screen wash is accompanied by a timed wipe of the windscreen , the headlamp wash also activates if the dipped beams are on.
The display of a message indicates that there is only approx. one litre of s c r e e n w a s h fl u i d r e m a i n i n g .
In freezing conditions, always check that the wiper blades are free to operate.
Remove any accumulation of snow at the base of the windscreen.