ignition CITROEN DS3 CABRIO 2018 Handbook (in English)
[x] Cancel search | Manufacturer: CITROEN, Model Year: 2018, Model line: DS3 CABRIO, Model: CITROEN DS3 CABRIO 2018Pages: 248, PDF Size: 8.79 MB
Page 12 of 248
10
A.Speed limiter
(mph or km/h) or
Cruise control.
B. Gear efficiency indicator.
C. Electronic or automatic gearbox
information.
D. Range
(miles or km) or
Trip distance recorder.
E. Service indicator
(miles or km) then,
Odometer.
These two functions are displayed
successively when switching on the
ignition.
F. Engine oil level indicator.
Appears a
few seconds after switching on
ignition, then disappears.
Display screen
01
Instruments
Page 14 of 248
12
A.Speed limiter
(mph or km/h) or
Cruise control.
B. Range
(miles or km) or
Trip distance recorder.
C. Service indicator
(miles or km) then,
Odometer.
These two functions are displayed
successively when switching on the
ignition.
D. Engine oil level indicator.
Appears a
few seconds after switching on
ignition, then disappears.
Warning and indicator
lamps
Visual identifiers informing the driver that
a system is in operation, switched off (on/
off indicator lamps) or has developed a
fault
(warning lamp).
When the ignition is switched on
Certain warning lamps come on for a few
s econds when the ignition is switched on.
When the engine is started, these same
warning lamps should go off.
If they remain on, before moving off refer to the
information on the warning lamp concerned.
The passenger airbag system operation
indicator lamp remains lit for one minute after
the ignition is on, even after the engine is
started.
Associated warnings
The lighting of certain indicator lamps may
be accompanied by an audible signal and
a
message on the multifunction screen. The warning lamp may come on
continuously (fixed) or flash.
Some warning lamps may have both types
of lighting. Only by relating the type of
illumination to the operating status of the
vehicle can it be ascertained whether the
situation is normal or whether a
fault has
occurred.
Warning lamps
When the engine is running or the vehicle is
being driven, illumination of one of the following
warning lamps indicates a
fault which requires
action on the part of the driver.
Any fault resulting in the illumination of
a
warning lamp must be investigated
further by reading the associated
message.
If you encounter any problems, contact the
dealer network or a
qualified workshop.
Display screen
01
Instruments
Page 16 of 248
14
Warning/indicator lampStateCause Action/Observations
STOP
Fixed, alone or
associated with
another warning lamp,
accompanied by an
audible signal and
a
message in the screen.The warning lamp lighting up is
associated with a serious fault in the
brakes or the coolant temperature. Stop as soon as it is safe to do so as there is a
risk
that the engine will cut out while driving.
Park, switch off the ignition and contact the dealer
network or a
qualified workshop.
Parking brake Fixed. The parking brake is applied or not
properly released. Release the parking brake to switch off the warning
lamp, keeping your foot on the brake pedal.
Observe the safety recommendations.
For more information on the Parking brake
, refer to
the corresponding section.
+ Brakes
Fixed, associated
with the STOP
warning lamp. The brake fluid level in the braking
circuit is too low.
You must stop as soon as it is safe to do so.
Top up with brake fluid that complies with the
manufacturer's recommendations.
If the problem persists, have the system checked in
the dealer network or by a
qualified workshop.
+
+ Fixed, associated
with the STOP and
ABS warning lamps.
The electronic brake force
distribution (EBFD) system is faulty.
You must stop as soon as it is safe to do so.
Have it checked by a
dealer or by a qualified
workshop.
01
Instruments
Page 17 of 248
15
Engine oil
pressureFixed.
There is a fault with the engine oil
lubrication circuit. You must stop as soon as it is safe to do so.
Park, switch off the ignition and contact the dealer
network or a
qualified workshop.
Warning/indicator lamp
StateCause Action/Observations
Maximum
coolant
temperature Fixed.
The temperature of the cooling
system is too high. You must stop as soon as it is safe to do so.
Wait until the engine has cooled down before topping
up the level, if necessary.
If the problem persists, contact the dealer network or
a
qualified workshop.
Battery charge Fixed. The battery charging circuit has
a
fault (dirty or loose terminals, slack
or cut alternator belt, etc.). The warning lamp should go off when the engine is
started.
If it does not go off, contact the dealer network or
a
qualified workshop.
Door(s) open
Fixed, if the speed is
below 6 mph (10 km/h).A door or the boot is still open. Close the door or boot.
Fixed and accompanied
by an audible signal
if the speed is above
6
mph (10 km/h).
Seat belt not
fastened/
unfastened Fixed, then flashing,
accompanied by an
increasing audible
signal. The driver or front passenger has
not fastened or has unfastened their
seat belt.
Pull the strap then insert the tongue into the buckle.
01
Instruments
Page 19 of 248
17
Warning/indicator lampStateCause Action/Observations
Dynamic
stability control
(DSC/ASR) Flashing.
Regulation by the system is active. The system optimises traction and allows improved
directional stability of the vehicle.
Fixed, associated
with illumination of
the indicator lamp
in the deactivation
button, accompanied
by an audible signal
and a
message.The DSC/ASR or hill start assist
system has a
fault.Have it checked in the dealer network or by
a
qualified workshop.
Low fuel level Fixed. When it first comes on, around
5
litres of fuel remain in the tank.You must refuel as soon as possible to avoid running
out of fuel.
This warning lamp will come on every time the ignition
is switched on, until sufficient fuel is added.
Tank capacity: approximately 50
litres (petrol)
or 46
litres (Diesel); (depending on version:
approximately 30
litres (petrol or Diesel)).
Never drive until completely empty, this could damage
the emissions control and injection systems.
Airbags Temporarily on. This warning lamp comes on for
a
few seconds when you turn on the
ignition, then goes off.
This warning lamp should go off when the engine is started.
If it does not go off, contact the dealer network or a qualified
workshop.
Fixed. One of the airbag or seat belt
pyrotechnic pretensioner systems
has a
fault. Have it checked in the dealer network or by
a
qualified workshop.
01
Instruments
Page 21 of 248
19
Warning/indicator lampStateCause Action/Observations
AdBlue
®
(BlueHDi Diesel)Fixed, on switching
on the ignition,
accompanied by an
audible signal and
a
message indicating the
remaining driving range.The remaining driving range is
between 370 miles and 1,500 miles
(600
km and 2,400 km). Have the AdBlue® tank topped up as soon as
possible: go to a
member of the dealer network or
a
qualified workshop, or carry out this operation
yourself.
+
Flashing, associated with
the SERVICE warning
light, accompanied by
an audible signal and
a message indicating the
remaining driving range.The remaining driving range is
between 0 and 370 miles
(0
and 600 km). You must top up the AdBlue® tank to avoid
a
breakdown : go to a
member of the dealer network
or a
qualified workshop, or carry out this operation
yourself.
Flashing, associated with
the SERVICE warning
lamp, accompanied
by an audible signal
and a
message
indicating that starting is
prevented.The AdBlue® tank is empty: the
starting inhibition system required
by legislation prevents starting of the
engine. To be able to start the engine, you must top up the
AdBlue® tank: go to the dealer network or a qualified
w
orkshop, or carry out this operation yourself.
It is essential to add at least 4
litres of AdBlue
® to the
corresponding tank.
For topping up or for more information
on AdBlue
®, refer to the corresponding
section.
01
Instruments
Page 22 of 248
20
Warning/indicator lampStateCause Action/Observations
+
+ SCR emissions
control system
(BlueHDi Diesel)
Fixed, on switching
on the ignition,
associated with the
SERVICE and engine
diagnostic warning
lamps, accompanied
by an audible signal
and a
message.A fault with the SCR emissions
control system has been detected.
This alert disappears once the exhaust emissions
return to normal levels.
Flashing, on switching
on the ignition,
associated with the
SERVICE and engine
diagnostic warning
lamps, accompanied by
an audible signal and
a
message indicating
the remaining driving
range.After confirmation of the fault with
the emissions control system,
you can continue driving for up to
685
miles (1,100 km) before the
engine start inhibition system is
triggered. To avoid a
breakdown, contact the dealer network
or a qualified workshop without delay.
Flashing, on switching
on the ignition,
associated with the
SERVICE and engine
diagnostic warning
lamps, accompanied
by an audible signal
and a
message. You have exceeded the authorised
driving limit following confirmation
of a
fault with the emissions control
system: the engine start inhibition
system prevents starting of the
engine. To be able to restart the engine, you must
call on the
dealer network or a
qualified workshop.
01
Instruments
Page 23 of 248
21
Rear foglampsFixed. The rear foglamps are on. Turn the ring on the stalk rear ward to switch off the
rear foglamps.
Diesel engine
pre-heating Fixed.
The key is at position 2
(ignition on)
in the ignition switch. Wait until the warning lamp goes off before starting.
The period of illumination of the warning lamp is
determined by the climatic conditions (up to about
thirty seconds in extreme conditions).
If the engine does not start, switch the ignition off and
then on, wait until the warning lamp goes off again,
then start the engine.
Foot on brake Fixed. The brake pedal must be pressed. With an electronic gearbox, selector in position N ,
press the brake pedal to start the engine.
With an automatic gearbox, with the engine running,
press the brake pedal before releasing the parking
brake to unlock the lever and come out of position P .
If you wish to release the parking brake without
pressing the brake pedal, this warning lamp will
remain on.
Flashing. With an electronic gearbox, if you
hold the vehicle on an incline using
the accelerator for too long, the
clutch overheats. Use the brake pedal and/or the parking brake.
Warning/indicator lamp
StateCause Action/Observations
01
Instruments
Page 27 of 248
25
Service indicator
Warning/indicator lampStateCause Action/Observations
Service spanner Fixed, temporary
when the ignition is
switched on. Between 1,860
miles (3,000 km) and
620
miles (1,000 km) remain before
the next ser vice is due. The ser vice indicator is displayed for a
few seconds
in the instrument panel. Depending on the version:
-
t
he distance recorder displays a line showing the
distance remaining (in kilometres or miles) before
the next ser vice is due.
-
a
n alert indicates the distance remaining (in
kilometres or miles) as well as the period before
the next ser vice is due.
The service spanner disappears after a
few seconds.
The alert may be triggered close to the due date.
Fixed, when the
ignition is switched
on. Less than 620
miles (1,000 km)
remain before the next ser vice is
due. The ser vice indicator is displayed for a
few seconds
in the instrument panel. Depending on the version:
-
t
he distance recorder display line indicates the
distance remaining before the next ser vice is due.
-
a
n alert message indicates the distance remaining
as well as the period before the next ser vice is
due.
The ser vice spanner remains on to show that
a
ser vice is required very soon.
The alert may be triggered close to the due date.
01
Instruments
Page 28 of 248
26
Warning/indicator lampStateCause Action/Observations
Service spanner Flashing then fixed,
when the ignition is
switched on. Service is overdue.
The ser vice indicator is displayed for a
few seconds
in the instrument panel. Depending on the version:
-
t
he total distance recorder displays a line showing
the distance travelled since ser vice was due. The
value is preceded by the "-" sign.
-
a
n alert message indicates that ser vice is
overdue.
The ser vice spanner remains on until the ser vice has
been performed.
The alert is triggered when the due date has passed.
+ Flashing then fixed,
when the ignition
is switched on,
associated with the
Ser vice warning
lamp.Ser vice is overdue for diesel
BlueHDi versions.
The ser vice indicator is displayed for a
few seconds
in the instrument panel. Depending on the version:
-
t
he total distance recorder displays a line showing
the distance travelled since ser vice was due. The
value is preceded by the "-" sign.
-
a
n alert message indicates that ser vice is
overdue.
The ser vice spanner remains on until the ser vice has
been performed.
The alert is triggered when the due date has passed.
The distance indicated (in kilometres
or miles) is calculated according to the
mileage covered and the time elapsed
since the last ser vice.
01
Instruments