fuse Citroen DS3 DAG 2010 1.G Owner's Manual
[x] Cancel search | Manufacturer: CITROEN, Model Year: 2010, Model line: DS3 DAG, Model: Citroen DS3 DAG 2010 1.GPages: 253, PDF Size: 7.45 MB
Page 32 of 253
Ventilation
Air intake
The air circulating in the passenger compartment is filtered and originates either from the outside via the grille located at the base of the windscreen or from the inside in air recirculation mode.
Air treatment
The incoming air follows various routes depending on the controls selected by the driver: - direct arrival in the passenger compar tment (air intake), - passage through a heating circuit (heating), - passage through a cooling circuit (air conditioning). The temperature control enables you to obtain the level of comfor t required by mixing the air of the various circuits. The air distribution control enables you to diffuse the air in the passenger compar tment combining several air vents. The air flow control enables you to increase or reduce the speed of the ventilation blower.
Control panel
The controls of this system are grouped together on control panel A on the centre console. Depending on the model, the functions offered are: - the level of comfor t required, - air flow, - air distribution, - demisting-defrosting, - manual or digital air conditioning controls.
Air distribution
1. Windscreen demisting-defrosting vents. 2. Front side window demisting-defrosting vents. 3. Side adjustable air vents. 4. Central adjustable air vents. 5. Air outlets to the front footwells. 6. Air outlets to the rear footwells.
Page 47 of 253
71Comfort
Scented air freshener
System permitting the diffusion of a fragrance in t he passenger compar tment in accordance with your requ irements, by means of the adjustment dial and the various fragrance car tridges available.
This dial is located on the dashboard. It allows you to adjust the intensity of diffusion of the fragrance. Turn the dial to the right to permit diffusion of the fragrance. Turn the dial to the left to stop diffusion of the fragrance.
Adjustment dial
This car tridge can be removed easily. The first time it is used, replace the plug with a real car tridge. You can change it at any time and store it in the sealed case which keeps it closed once it has been opened. You can obtain different fragrance car tridges from CITROËN dealers.
Leave the central vents open. The intensity of diffusion of the fragrance may depend on the ventilation or air conditioning settings.
Fragrance cartridge
Do not discard the original car tridge as this ser ves as a plug when no fragrance car tridge is in use. In order to preser ve the ser vice life of the car tridge, turn the dial fully to the left when you no longer wish to diffuse the fragrance in the passenger compar tment.
As a safety precaution, do not carry out any action on the car tridge while driving.
Do not dismantle the car tridges. Do not attempt to refill the fragrance diffuser or the car tridges.
Avoid all contact with the skin and eyes. Keep out of reach of children and animals.
Page 142 of 253
167Checks
Petrol engines
1. Screenwash fluid reser voir. 2. Coolant header tank. 3. Air filter.
4. Brake fluid reser voir. 5. Battery. 6. Fusebox. 7. Engine oil dipstick. 8. Engine oil filler cap.
Page 143 of 253
Diesel engines
1. Screenwash fluid reser voir. 2. Coolant header tank. 3. Air filter.
4. Brake fluid reser voir. 5. Battery. 6. Fusebox. 7. Engine oil dipstick. 8. Engine oil filler cap. 9. Priming pump (on fuel filter).
Page 168 of 253
195Practical information
Changing a fuse
Installing electrical accessories
Your vehicle's electrical system is designed to operate with standard or optional equipment. Before installing other electrical equipment or accessories on your vehicle, contact a CITROËN dealer.
CITROËN will not accept responsibility for the cost incurred in repairing your vehicle or for rectifying malfunctions resulting from the installation of accessories not supplied and not recommended by CITROËN and not installed in accordance with its instructions, in par ticular when the combined consumption of all of the additional equipment connected exceeds 10 milliamperes.
The extraction pliers and the spare fuse storage locations are fitted to the back of the dashboard fuse box cover.
For access to them: unclip the cover by pulling on the side, remove the cover completely,
remove the pliers.
Access to the tools
Before changing a fuse, the cause of the failure must be identified and rectified. Identify the faulty fuse by checking the condition of its filament.
Changing a fuse
CorrectIncorrect
Use the special pliers to extract the fuse from its housing.
Always replace the faulty fuse with a fuse of the same rating. Check the correspondence between the number etched on the box, the rating etched on the fuse and the tables below.