remote control DACIA SOLENZA 2004 Owner's Manual

82
ACCOUSTIC WARNING - ANTI STARTING
82 - 44
Diagnostic – General
-If doors are unlocked and none of them is
not opened in the next 30 seconds, the system
is automatically re-locking the vehicle doors
(without hazard lights blinking). -Cockpit central Unit is controlling the
vehicle inside lightening. In case a ceiling lamp
still lighted, Cockpit Central Unit is cutting the
supplying after approximately 30 minutes.
- The model “Full equipment” is controlling
the ceiling lamp progressive turning off, after
doors blocking by means of the remote control.
- Cockpit Central Unit may set on the hazard
lights in case of “shock connection” information
coming from UCE airbag.
-S pare parts keys are delivered not coded,
so they have no code.
-I t is possible in case of key’s l oss, theft or
by client’s request, that one vehicle ke y is
decommissioned. This one may be re-assigned
on the same vehicle, if necessary.
ATT E NT ION:
〈〈 〈〈
By this sy stem , i t i s i mp os s ib le th e
replacem ent of Coc kpit Central Unit and
keys in the same time. These parts are sold
not coded. 〈〈〈〈
The code me morized by the system’s
elements can not be erased (Cockpit
Central Unit and injection computer). The
memorized code can not be erased.
GENERAL
Cockpit Central Unit (UCH) is replacing
the UCE decoder.
Cockpit Ce ntral Unit is located under
dashboard, left side.
I MPORTANT
When replacing the Cockpit central Unit
it will be necessary to set the function
correspon ding to the vehicle equipment level,
by means of the CLIP tester.
ATT E NT ION
Starting is impossible unless the anti-
starting programming procedure is
performed.
When replacing a Cockpit Central Unit, it
is necessary to perform the programming and
settin g corresponding to the vehicle equipment
level.
When adding a key it is necessary that keys
re-assignation procedure be performed.
System’s characteristics.
- This system may work with maximum 4
remote controls (Cockpit central unit can
manage only 4 different codes).
-Radio-fr equenc y si gnal receive r i s
integrated in Cockpit Central Unit
-D oors central locking button is not
activated when doors ha ve be en c losed by
means of the remote control.
-Doors locking and unlocking using the
remote control may be visualized by hazard
lights signals (if all doors are properly closed);
- locking : 2 signals
- unlocking: 1 signal
vnx.su

87
ELECTRICAL ASSISANCE EQUIPEMENT
87 - 16
Diagnostic - Conformity checking
Do not perform this conformity checking but after a compete
checking by means of diagnostic tester. The values displayed
in this conformity checking are only informative.
The execution condition: stopped engine, contact set on.
RECOMMENDATIONS
Par ameter or state
Checking or action
ET010: Key RF valid
ET193: RF information
r eceived
ET012: source of last
r eceived co ntrol
ET105: Last received
c ontrol Visualization and
observations
State YES when
doors locking or
unlocking is done
using a remote control a ssigned to that UCH
.
State YES when
doors blocking/
unlocking is done using the remote
control
TRF when doors
locking/unloc king is
done u sing the remote
cont rol, CP E when
locking/unloc king is
done u sing the doors
central locking switch
UNL OCKI NG LOCK ING Diagnos tic
If problems occurring: see state diagnostic ET010
If problems occurring: see state diagnostic ET193
Nothing to notice
Nothing to notice
No.
1F unction
Opening
(ctd)
vnx.su

87
ELECTRICAL ASSISANCE EQUIPEMENT
87 - 19
Diagnostic – States interpretation
RECOMMENDATIONSONLY for “N4” Cockpit Central Unit
Check that no failure is present.
State is declared YES when pushing the remote control button.
If state is declared NO, set on then set off + After contact
Try again then with another key of the vehicle.
ET010 remain s at NO: ACTIVE with contact set off
Pr oceed to a key’s re-synchronizing by setting on the contact (+ After contact)
If problem is persisting and if
<> is in state
YES , replace the keys.
If problem is persisting, replace Cockpit Central Unit
ET010
RF VALID KEY
Perform again a system diagnostic
Repair the other possible failures
Erase the memorized failures.
AFTER REPARATION
vnx.su

87
ELECTRICAL ASSISANCE EQUIPEMENT
87 - 24
Diagnostic – States interpretation
ET193RECEIVED INFORMATION
RECOMMENDATIONSOnly for “N4” Cockpit Central Unit.
Check that no failure is present
State is declared YES when pushing the remote control
If state i s declared NO, set on then set off the contact.
Try again with another key of the vehicle.
ET193 remains at NO : when pushing the remote c ontrol
Push the remote control button of some other vehicle of same type or with a new key:
Check that state is becoming YES, when pushing the remote control.
If state is YES , replace t he remote control of the breakdown vehicle.
If state is NO, replace the Cockpit Central Unit
Perform again a system diagnostic
Repair the other possible failures
Erase the memorized failures.
AFTER REPARATION
vnx.su