DAEWOO NUBIRA 2004 Service Repair Manual

DAEWOO NUBIRA 2004 Service Repair Manual NUBIRA 2004 DAEWOO DAEWOO https://www.carmanualsonline.info/img/54/56879/w960_56879-0.png DAEWOO NUBIRA 2004 Service Repair Manual
Trending: coolant temperature, service reset, automatic transmission fluid, spark plugs replace, seat memory, glove box, oil reset

Page 1751 of 2643

DAEWOO NUBIRA 2004  Service Repair Manual AISIN AUTOMATIC TRANSAXLE  5A2 – 161
DAEWOO V–121 BL4
109.  Coat new 6 O–rings with ATF and install them
to the pistons.
110.  Coat the 3 springs and 3 accumulator pistons
with ATF, install them

Page 1752 of 2643

DAEWOO NUBIRA 2004  Service Repair Manual 5A2 – 162IAISIN AUTOMATIC TRANSAXLE
DAEWOO V–121 BL4
114.  Connect the manual valve control rod to the
manual valve lever as shown in the illustration.
115.  Install the valve body assembly to the

Page 1753 of 2643

DAEWOO NUBIRA 2004  Service Repair Manual AISIN AUTOMATIC TRANSAXLE  5A2 – 163
DAEWOO V–121 BL4
120.  Install the oil strainer to the valve body with the
3 bolts.
Tighten
Tighten the bolts to 9.8 NSm (87 lb–in).
121.  Install the 2 magn

Page 1754 of 2643

DAEWOO NUBIRA 2004  Service Repair Manual 5A2 – 164IAISIN AUTOMATIC TRANSAXLE
DAEWOO V–121 BL4
124.  Install the No.1 breather plug.
125.  Install the input shaft speed (ISS) sensor with
the bolt.
Tighten
Tighten the bolts to 5.4 NSm (48

Page 1755 of 2643

DAEWOO NUBIRA 2004  Service Repair Manual AISIN AUTOMATIC TRANSAXLE  5A2 – 165
DAEWOO V–121 BL4
132.  Temporarily install the control lever.
133.  Turn the lever counterclockwise until it stops,
then turn it clockwise 2 notches.
134.  Rem

Page 1756 of 2643

DAEWOO NUBIRA 2004  Service Repair Manual 5A2 – 166IAISIN AUTOMATIC TRANSAXLE
DAEWOO V–121 BL4
138.  Install the control lever, washer and nut.
Tighten
Tighten the nut to 12 NSm (106 lb–in).
139.  Install the torque converter to the tra

Page 1757 of 2643

DAEWOO NUBIRA 2004  Service Repair Manual AISIN AUTOMATIC TRANSAXLE  5A2 – 167
DAEWOO V–121 BL4
OIL PUMP
1.  Oil Pump Body
2.  Oil Pump Drive Gear
3.  Oil Pump Driven Gear4. Stator Shaft
5. Bolt

Page 1758 of 2643

DAEWOO NUBIRA 2004  Service Repair Manual 5A2 – 168IAISIN AUTOMATIC TRANSAXLE
DAEWOO V–121 BL4
Disassembly Procedure
1.  Turn the drive gear with 2 screwdrivers and make
sure it rotates smoothly.
Notice : Be careful not to damage the oil

Page 1759 of 2643

DAEWOO NUBIRA 2004  Service Repair Manual AISIN AUTOMATIC TRANSAXLE  5A2 – 169
DAEWOO V–121 BL4
2.  Measure the tip clearance between the driven gear
teeth and drive gear teeth.
S  Standard tip clearance:
0.07  0.15 mm (0.0028  0.0059 i

Page 1760 of 2643

DAEWOO NUBIRA 2004  Service Repair Manual 5A2 – 170IAISIN AUTOMATIC TRANSAXLE
DAEWOO V–121 BL4
Assembly Procedure
1.  Install the oil pump drive gear and driven gear.
2.  Align the stator shaft with each bolt hole.
3.  Install the 8 bolts
Trending: traction control, tires, dashboard, odometer, rims, radiator, gear shift