tire pressure reset DODGE JOURNEY 2017 1.G Owners Manual
[x] Cancel search | Manufacturer: DODGE, Model Year: 2017, Model line: JOURNEY, Model: DODGE JOURNEY 2017 1.GPages: 510
Page 480 of 510

MAINTENANCE SCHEDULE
Your vehicle is equipped with an automatic oil change
indicator system. The oil change indicator system will
remind you that it is time to take your vehicle in for
scheduled maintenance.
Based on engine operation conditions, the oil change
indicator message will illuminate. This means that service
is required for your vehicle. Operating conditions such as
frequent short-trips, trailer tow, extremely hot or cold
ambient temperatures, and E-85 fuel usage will influence
when the “Change Oil” or “Oil Change Required” message
is displayed. Severe Operating Conditions can cause the
change oil message to illuminate as early as 3,500 miles
(5,600 km) since last reset. Have your vehicle serviced as
soon as possible, within the next 500 miles (805 km).
Your authorized dealer will reset the oil change indicator
message after completing the scheduled oil change. If a
scheduled oil change is performed by someone other than
your authorized dealer, the message can be reset by
referring to the steps described under “Instrument Cluster
Display” in “Understanding Your Instrument Panel” for
further information.NOTE:
Under no circumstances should oil change inter-
vals exceed 10,000 miles (16,000 km), twelve months or 350
hours of engine run time, whichever comes first. The 350
hours of engine run or idle time is generally only a concern
for fleet customers.
Severe Duty All Models
Change Engine Oil at 4,000 miles (6,500 km) if the vehicle
is operated in a dusty and off road environment or is
operated predominately at idle or only very low engine
RPM’s. This type of vehicle use is considered Severe Duty.
Once A Month Or Before A Long Trip:
• Check engine oil level.
• Check windshield washer fluid level.
• Check tire pressure and look for unusual wear or
damage. Rotate tires at the first sign of irregular wear,
even if it occurs before the oil indicator system turns on.
• Check the fluid levels of the coolant reservoir, brake
master cylinder, power steering, and transmission (4-
speed only) and fill as needed.
• Check function of all interior and exterior lights.
478 MAINTENANCE SCHEDULES
Page 501 of 510

Lug Nuts............................... .405
Maintenance Free Battery .....................437
Maintenance Procedures ..................... .434
Malfunction Indicator Light (Check Engine) . . . .233, 432
Manual, Service ........................... .488
Manual Transaxle Fluid Level Check ....................... .454
Lubricant Selection ...................... .454
Map/Reading Lights ....................... .172
Marker Lights, Side ........................ .467
Master Cylinder (Brakes) .....................450
Methanol ............................... .381
Mini-Trip Computer ........................ .247
Mirrors .............................. .89, 189
Automatic Dimming .......................89
Electric Powered ..........................90
Electric Remote ...........................90
Exterior Folding ..........................92
Heated .................................92
Outside ................................90
Rearview ...............................89
Vanity .................................93
Mode Fuel Saver ............................ .245Modifications/Alterations, Vehicle
................6
Monitor, Tire Pressure System ..................374
MOPAR Parts ......................... .433, 487
MTBE/ETBE ............................. .381
Multi-Function Control Lever ..................171
New Vehicle Break-In Period ...................80
Occupant Restraints .........................34
Octane Rating, Gasoline (Fuel) ..............380, 473
Oil Change Indicator ....................... .244
Oil Change Indicator, Reset ...................244
Oil, Engine ........................... .434, 473
Capacity .............................. .472
Change Interval ..................... .244, 435
Checking ............................. .434
Dipstick .............................. .434
Disposal .............................. .436
Filter ............................. .437,
473
Filter Disposal .......................... .436
Identification Logo ...................... .435
Materials Added To ...................... .436
Pressure Warning Light ....................230
Recommendation .....................435, 472
Synthetic ............................. .436
10
INDEX 499