spare tire DODGE RAM 2001 Service User Guide
[x] Cancel search | Manufacturer: DODGE, Model Year: 2001, Model line: RAM, Model: DODGE RAM 2001Pages: 2889, PDF Size: 68.07 MB
Page 2833 of 2889
UNDER VEHICLE
INSPECTION - TIRE PRESSURES
(1) Using the tire placard or the Safety Certifica-
tion Label, check that the correct tires are mounted
on the vehicle.
(2) Install valve stem extensions as required.
(3) Using the tire placard or the Safety Certifica-
tion Label, check tire pressure (including spare) and
adjust as required to recommended pressure.
(4) Inspect the spare tire for correct pressure and
proper mounting (Fig. 13).
NOTE: Tire pressure may have been set above nor-
mal during manufacturing in order to properly seat
the tire bead. Be sure to adjust to proper specifica-
tion.
INSPECTION - VISUAL
CAUTION: Before raising the vehicle on a hoist,
(Refer to LUBRICATION & MAINTENANCE/HOISTING
- STANDARD PROCEDURE) for the proper lifting
points.
(1) Visually inspect the following for loose attach-
ment, leakage, clearance and routing, and tighten
connections and clamps as required:
²Engine
²Oil Cooler
²Cooling System
²Transmission
²Driveshaft Boots²Differential
²Transfer Case (Fig. 19)
²Transmission Cooler and Lines (Fig. 18)
²Brake System and Lines (Fig. 14)
²Fuel System
²Exhaust System (Fig. 15), (Fig. 16) and (Fig. 17)
²Steering and Suspension Components
Fig. 13 SPARE TIRE INSPECTION
Fig. 14 BRAKE LINES TO CALIPERS (REAR)
Fig. 15 EXHAUST CLAMPS
30 - 8 NEW VEHICLE PREPARATIONBR/BE
Page 2879 of 2889
SHIFT LEVER - INSTALLATION . . . 21-853,21-888,
21-924
SHIFT LEVER - INSTALLATION, GEAR.....19-13
SHIFT LEVER - REMOVAL . 21-852,21-887,21-924
SHIFT LEVER - REMOVAL, GEAR........19-13
SHIFT MECHANISM - ADJUSTMENT....21-252,
21-423,21-596,21-769
SHIFT MECHANISM - DESCRIPTION....21-251,
21-422,21-595,21-768
SHIFT MECHANISM - INSTALLATION.....21-89
SHIFT MECHANISM - OPERATION......21-251,
21-422,21-595,21-768
SHIFT MECHANISM - REMOVAL.........21-88
SHIFT/CLUTCH INTERLOCK SYSTEM -
INSPECTION........................30-19
SHIPPED LOOSE ITEMS - INSTALLATION . . 30-14
SHOCK - DESCRIPTION........2-11,2-21,2-28
SHOCK - DIAGNOSIS AND TESTING . . . 2-11,2-21
SHOCK - DIAGNOSIS AND TESTING,
SPRING.............................2-26
SHOCK - INSTALLATION........2-11,2-21,2-28
SHOCK - OPERATION..........2-11,2-21,2-28
SHOCK - REMOVAL............2-11,2-21,2-28
SHOES - 2500/3500 - INSTALLATION,
REAR DRUM IN HAT PARK BRAKE........5-42
SHOES - 2500/3500 - REMOVAL, REAR
DRUM IN HAT PARK BRAKE.............5-41
SHOES-11 INCH - INSTALLATION, REAR
BRAKE..............................5-27
SHOES-11 INCH - REMOVAL, REAR
BRAKE..............................5-25
SHORT TO GROUND - STANDARD
PROCEDURE, TESTING FOR A........8W-01-6
SHORT TO GROUND ON FUSES
POWERING SEVERAL LOADS -
STANDARD PROCEDURE, TESTING....8W-01-7
SHOULDER BELTS, RETRACTORS AND
HEAD RESTRAINTS - INSPECTION,
SEAT BELTS.........................30-12
SHUT DOWN RELAY - INSTALLATION,
AUTOMATIC..........................8I-5
SHUT DOWN RELAY - REMOVAL,
AUTOMATIC..........................8I-4
SHUTFACE HANDLE - INSTALLATION.....23-83
SHUTFACE HANDLE - REMOVAL.........23-83
SIDE MOLDINGS - INSTALLATION, BODY . . 23-87
SIDE MOLDINGS - REMOVAL, BODY.....23-87
SIDE PANEL SPEAKER - INSTALLATION,
REAR CAB..........................8A-21
SIDE PANEL SPEAKER - REMOVAL,
REAR CAB..........................8A-20
SIDE VIEW MIRROR - INSTALLATION.....23-97
SIDE VIEW MIRROR - LOW MOUNTED -
INSTALLATION.......................23-98
SIDE VIEW MIRROR - LOW MOUNTED -
REMOVAL..........................23-98
SIDE VIEW MIRROR - REMOVAL........23-97
SIDE VIEW MIRROR FLAG -
INSTALLATION.......................23-74
SIDE VIEW MIRROR FLAG - REMOVAL . . . 23-74
SIDE VIEW MIRROR GLASS -
INSTALLATION.......................23-98
SIDE VIEW MIRROR GLASS - REMOVAL . . 23-98
SIDEVIEW MIRROR - DESCRIPTION......8N-13
SIDEVIEW MIRROR - DIAGNOSIS AND
TESTING...........................8N-13
SIDEVIEW MIRROR - OPERATION.......8N-13
SIDEVIEW MIRROR - REMOVAL.........8N-14
SIGNAL & HAZARD WARNING SYSTEM -
DESCRIPTION, TURN..................8L-2
SIGNAL & HAZARD WARNING SYSTEM -
DIAGNOSIS AND TESTING, TURN.........8L-3
SIGNAL & HAZARD WARNING SYSTEM -
OPERATION, TURN....................8L-2
SIGNAL CANCEL CAM - DESCRIPTION,
TURN..............................8L-30
SIGNAL CANCEL CAM - OPERATION,
TURN..............................8L-31
SIGNAL GROUND - DESCRIPTION.......8E-17
SIGNAL INDICATORS - DESCRIPTION,
TURN
..............................8J-32
SIGNAL INDICATORS - DIAGNOSIS AND
TESTING, TURN
......................8J-32
SIGNAL INDICATORS - OPERATION,
TURN
..............................8J-32
SIGNAL LAMP - INSTALLATION,
PARK/TURN
.........................8L-29
SIGNAL LAMP - REMOVAL, PARK/TURN
. . 8L-29SIGNAL LAMP UNIT - INSTALLATION,
PARK/TURN.........................8L-29
SIGNAL LAMP UNIT - REMOVAL,
PARK/TURN.........................8L-29
SIGNALS - INSPECTION, TURN AND
EMERGENCY........................30-19
SILENCER PAD - INSTALLATION........23-103
SILENCER PAD - REMOVAL...........23-103
SILL TRIM - INSTALLATION, DOOR.....23-121
SILL TRIM - REMOVAL, DOOR.........23-121
SINGLE CARDAN UNIVERSAL JOINTS -
DISASSEMBLY........................3-11
SINGLE CARDAN UNIVERSAL JOINTS -
INSTALLATION....................3-34,3-66
SINGLE CARDAN UNIVERSAL JOINTS -
REMOVAL.......................3-33,3-65
SKID PLATE - INSTALLATION, TRANSFER
CASE..............................13-11
SKID PLATE - REMOVAL, TRANSFER
CASE..............................13-11
SLAM BUMPER - INSTALLATION........23-66
SLAM BUMPER - REMOVAL............23-66
SMOKE DIAGNOSIS CHARTS -
DIAGNOSIS AND TESTING.............9-234
SOLENOID - DESCRIPTION.....21-252,21-423,
21-596,21-769
SOLENOID - DESCRIPTION, EVAP/PURGE . 25-32
SOLENOID - INSTALLATION, EVAP/
PURGE.............................25-32
SOLENOID - OPERATION . 21-253,21-424,21-597,
21-770
SOLENOID - REMOVAL, EVAP/PURGE.....25-32
SOLID LIFTERS/TAPPETS - CLEANING....9-281
SOLID LIFTERS/TAPPETS - INSPECTION . . 9-281
SOLID LIFTERS/TAPPETS -
INSTALLATION.......................9-281
SOLID LIFTERS/TAPPETS - REMOVAL....9-280
SPARE TIRE - DESCRIPTION.............22-9
SPARE TIRE WINCH - INSTALLATION.....13-10
SPARE TIRE WINCH - REMOVAL........13-10
SPARK PLUG - CLEANING..............8I-19
SPARK PLUG - DESCRIPTION...........8I-16
SPARK PLUG - INSTALLATION...........8I-19
SPARK PLUG - OPERATION.............8I-16
SPARK PLUG - REMOVAL..............8I-18
SPARK PLUG CABLE - DESCRIPTION.....8I-19
SPARK PLUG CABLE - INSTALLATION.....8I-20
SPARK PLUG CABLE - OPERATION.......8I-19
SPARK PLUG CABLE - REMOVAL........8I-20
SPARK PLUG CABLE ORDER, 8.0L V-10
ENGINE..............................8I-2
SPARK PLUG CABLE RESISTANCE,
SPECIFICATIONS......................8I-3
SPARK PLUG CABLES - DIAGNOSIS AND
TESTING............................8I-19
SPARK PLUG CONDITIONS - DIAGNOSIS
AND TESTING........................8I-16
SPARK PLUGS, SPECIFICATIONS..........8I-3
SPEAKER - DESCRIPTION..............8A-17
SPEAKER - DIAGNOSIS AND TESTING....8A-18
SPEAKER - INSTALLATION, A-PILLAR
TWEETER..........................8A-19
SPEAKER - INSTALLATION, FRONT DOOR . 8A-20
SPEAKER - INSTALLATION, REAR CAB
SIDE PANEL........................8A-21
SPEAKER - INSTALLATION, REAR DOOR . . 8A-21
SPEAKER - OPERATION...............8A-17
SPEAKER - REMOVAL, A-PILLAR
TWEETER..........................8A-19
SPEAKER - REMOVAL, FRONT DOOR.....8A-20
SPEAKER - REMOVAL, REAR CAB SIDE
PANEL.............................8A-20
SPEAKER - REMOVAL, REAR DOOR......8A-21
SPECIAL TOOLS - 5.2L ENGINE..........9-77
SPECIAL TOOLS - 5.9L DIESEL ENGINE . . . 9-244
SPECIAL TOOLS - 5.9L ENGINE.........9-134
SPECIAL TOOLS - 8.0L ENGINE.........9-188
SPECIAL TOOLS - AUDIO SYSTEMS.......8A-4
SPECIAL TOOLS - BASE BRAKES..........5-4
SPECIAL TOOLS - COOLING.............7-18
SPECIAL TOOLS - DIESEL FUEL SYSTEM . . 14-59
SPECIAL TOOLS - FRONT AXLE
..........3-58
SPECIAL TOOLS - FRONT AXLES
.........3-25
SPECIAL TOOLS - FUEL SYSTEM
....14-36,14-4
SPECIAL TOOLS - HEADLAMP
ALIGNMENT
..........................8L-4
SPECIAL TOOLS - INDEPENDENT FRONT
SUSPENSION
..........................2-9SPECIAL TOOLS - LINK/COIL
SUSPENSION.........................2-16
SPECIAL TOOLS - NV5600 MANUAL
TRANSMISSION.....................21-127
SPECIAL TOOLS - OVERHEAD CONSOLE
SYSTEMS...........................8M-8
SPECIAL TOOLS - POWER
DISTRIBUTION SYSTEMS............8W-97-2
SPECIAL TOOLS - POWER STEERING
GEAR..............................19-20
SPECIAL TOOLS - POWER STEERING
PUMP.............................19-36
SPECIAL TOOLS - PROPELLER SHAFT......3-8
SPECIAL TOOLS - RE TRANSMISSION . . 21-534,
21-704
SPECIAL TOOLS - RE TRANSMISSIONS . 21-188,
21-359
SPECIAL TOOLS - STEERING LINKAGE . . . 19-39,
19-42
SPECIAL TOOLS - SUSPENSION-REAR.....2-28
SPECIAL TOOLS, AIRBAG SYSTEM.......8O-6
SPECIAL TOOLS, WIRING/TERMINAL . . . 8W-01-8
SPECIFICATIONS - 2001 BR PAINT
COLOR CODES.....................23-129
SPECIFICATIONS - 3.9L ENGINE..........9-14
SPECIFICATIONS - 5.2L ENGINE..........9-72
SPECIFICATIONS - 5.9L DIESEL.........9-242
SPECIFICATIONS - 5.9L ENGINE.........9-129
SPECIFICATIONS - 8.OL ENGINE.........9-184
SPECIFICATIONS - A/C APPLICATION
TABLE................................24-8
SPECIFICATIONS - ALIGNMENT...........2-6
SPECIFICATIONS - BASE BRAKE...........5-2
SPECIFICATIONS - BATTERY.............8F-6
SPECIFICATIONS - BODY GAP AND
FLUSH MEASUREMENTS...............23-56
SPECIFICATIONS - BODY OPENING
DIMENSIONS........................23-60
SPECIFICATIONS - BODY SEALER
LOCATIONS.........................23-47
SPECIFICATIONS - BRAKE FLUID.........5-15
SPECIFICATIONS - FLUID CAPACITIES......0-6
SPECIFICATIONS - FRAME DIMENSION....13-7
SPECIFICATIONS - FUEL INJECTION
PUMP DATA PLATE...................14-73
SPECIFICATIONS - GENERATOR RATINGS . . 8F-28
SPECIFICATIONS - IGNITION TIMING......8I-3
SPECIFICATIONS - POWER STEERING
GEAR..............................19-19
SPECIFICATIONS - PROPELLER SHAFT......3-8
SPECIFICATIONS - SPARK PLUG CABLE
RESISTANCE..........................8I-3
SPECIFICATIONS - SPARK PLUGS.........8I-3
SPECIFICATIONS - SPECIFICATIONS......24-46
SPECIFICATIONS - SPECIFICATIONS.....21-357
SPECIFICATIONS - STARTING SYSTEM....8F-38
SPECIFICATIONS - STRUCTURAL
ADHESIVE LOCATIONS................23-44
SPECIFICATIONS - TIRE REVOLUTIONS
PER MILE...........................22-9
SPECIFICATIONS - TORQUE.............7-17
SPECIFICATIONS - TORQUE . . . 9-133,9-18,9-187,
9-243,9-76
SPECIFICATIONS - TORQUE.............11-5
SPECIFICATIONS - TORQUE CHART........5-3
SPECIFICATIONS - TORQUE CHART . 19-19,19-39,
19-41,19-9
SPECIFICATIONS - TORQUE CHART . . . 2-15,2-27,
2-8
SPECIFICATIONS - TORQUE CHART......22-11
SPECIFICATIONS - TORQUE
SPECIFICATIONS.....................23-61
SPECIFICATIONS - TORQUE
SPECIFICATIONS......................13-9
SPECIFICATIONS - TORQUE
SPECIFICATIONS......................24-8
SPECIFICATIONS - TRANSFER CASE....21-848,
21-883,21-919
SPECIFICATIONS - TRANSMISSION.....21-186,
21-532,21-702
SPECIFICATIONS - WELD LOCATIONS.....23-4
SPECIFICATIONS, CLUTCH...............6-7
SPECIFICATIONS, FUEL SYSTEM
PRESSURE - GAS ENGINES
.............14-4
SPECIFICATIONS, NV4500
..............21-83
SPECIFICATIONS, NV5600
.............21-126
SPECIFICATIONS, SPECIFICATIONS
.......24-46
SPECIFICATIONS, SPECIFICATIONS
......21-357
32 INDEXBR/BE
Description Group-Page Description Group-Page Description Group-Page
Page 2882 of 2889
TANK MODULE - DESCRIPTION, FUEL....14-78
TANK MODULE - INSTALLATION, FUEL....14-79
TANK MODULE - OPERATION, FUEL......14-78
TANK MODULE - REMOVAL, FUEL.......14-78
TAPE STRIPE - INSTALLATION..........23-88
TAPE STRIPE - REMOVAL..............23-88
TAPPETS - DIAGNOSIS AND TESTING,
HYDRAULIC............9-151,9-206,9-38,9-95
TASK MANAGER - DESCRIPTION........25-15
TASK MANAGER - OPERATION..........25-19
TEMP SENSOR - 3.9L/5.2L/5.9L -
DESCRIPTION, ENGINE COOLANT.........7-48
TEMP SENSOR - 3.9L/5.2L/5.9L -
INSTALLATION, ENGINE COOLANT........7-48
TEMP SENSOR - 3.9L/5.2L/5.9L -
OPERATION, ENGINE COOLANT..........7-48
TEMP SENSOR - 3.9L/5.2L/5.9L -
REMOVAL, ENGINE COOLANT............7-48
TEMP SENSOR - DESCRIPTION,
AMBIENT..........................8M-11
TEMP SENSOR - INSTALLATION,
AMBIENT..........................8M-13
TEMP SENSOR - OPERATION, AMBIENT . . 8M-11
TEMP SENSOR - REMOVAL, AMBIENT . . . 8M-12
TEMPERATURE GAUGE - DESCRIPTION,
ENGINE............................8J-19
TEMPERATURE GAUGE - OPERATION,
ENGINE............................8J-19
TEMPERATURE SENSOR - DESCRIPTION,
BATTERY...........................8F-29
TEMPERATURE SENSOR - DESCRIPTION,
FUEL..............................14-99
TEMPERATURE SENSOR - DESCRIPTION,
TRANSMISSION . . . 21-262,21-433,21-606,21-779
TEMPERATURE SENSOR - DIAGNOSIS &
TESTING, AMBIENT..................8M-12
TEMPERATURE SENSOR -
INSTALLATION, BATTERY..............8F-29
TEMPERATURE SENSOR - OPERATION,
BATTERY...........................8F-29
TEMPERATURE SENSOR - OPERATION,
FUEL.............................14-100
TEMPERATURE SENSOR - OPERATION,
TRANSMISSION . . . 21-262,21-433,21-606,21-779
TEMPERATURE SENSOR - REMOVAL,
BATTERY...........................8F-29
TENSIONER - ADJUSTMENT, CABLE.......5-40
TENSIONER - DESCRIPTION, TIMING
BELT/CHAIN..........................9-57
TENSIONER - OPERATION, TIMING
BELT/CHAIN..........................9-57
TENSIONERS - 3.9L/5.2L/5.9L -
DESCRIPTION, BELT...................7-19
TENSIONERS - 3.9L/5.2L/5.9L -
INSTALLATION, BELT...................7-20
TENSIONERS - 3.9L/5.2L/5.9L -
OPERATION, BELT.....................7-19
TENSIONERS - 3.9L/5.2L/5.9L -
REMOVAL, BELT......................7-20
TENSIONERS - 5.9L DIESEL -
DESCRIPTION, BELT...................7-23
TENSIONERS - 5.9L DIESEL -
INSTALLATION, BELT...................7-23
TENSIONERS - 5.9L DIESEL -
OPERATION, BELT.....................7-23
TENSIONERS - 5.9L DIESEL - REMOVAL,
BELT ...............................7-23
TENSIONERS - 8.0L - DESCRIPTION,
BELT ...............................7-20
TENSIONERS - 8.0L - INSTALLATION,
BELT ...............................7-22
TENSIONERS - 8.0L - OPERATION, BELT . . . 7-20
TENSIONERS - 8.0L - REMOVAL, BELT.....7-21
TERMINAL - INSTALLATION.........8W-01-11
TERMINAL - REMOVAL.............8W-01-11
TEST - DIAGNOSIS AND TESTING, FUEL
INJECTOR.....................14-53,14-95
TEST - DIAGNOSIS AND TESTING, FUEL
PRESSURE LEAK DOWN
................14-2
TEST - DIAGNOSIS AND TESTING, FUEL
PUMP AMPERAGE
....................14-10
TEST - DIAGNOSIS AND TESTING, FUEL
PUMP CAPACITY
......................14-9
TEST - DIAGNOSIS AND TESTING, FUEL
PUMP PRESSURE
....................14-10
TEST - DIAGNOSIS AND TESTING,
HYDRAULIC PRESSURE
. . 21-144,21-315,21-487,
21-658TEST - DIAGNOSIS AND TESTING,
POWR-LOKY........................3-161
TEST - DIAGNOSIS AND TESTING, ROAD . . . 8P-3
TEST - INSPECTION WINDSHIELD
WIPERS/WASHERS, ROAD.............30-18
TEST - STANDARD PROCEDURE,
BUILT-IN INDICATOR..................8F-11
TEST - STANDARD PROCEDURE,
HYDROMETER.......................8F-12
TEST - STANDARD PROCEDURE,
IGNITION-OFF DRAW..................8F-15
TEST - STANDARD PROCEDURE, LOAD . . . 8F-14
TEST - STANDARD PROCEDURE,
OPEN-CIRCUIT VOLTAGE...............8F-13
TEST - STANDARD PROCEDURE,
VERIFICATION........................8O-5
TEST INSPECTION - DESCRIPTION,
ROAD..............................30-15
TEST MODE - DESCRIPTION, CIRCUIT
ACTUATION..........................25-1
TEST MODE - DESCRIPTION, STATE
DISPLAY............................25-1
TETHER - INSTALLATION, CHILD.........8O-9
TETHER - REMOVAL, CHILD.............8O-9
THEFT SECURITY - DESCRIPTION,
VEHICLE............................8Q-1
THEFT SECURITY - OPERATION, VEHICLE . . 8Q-2
THEFT SECURITY SYSTEM - DIAGNOSIS
AND TESTING, VEHICLE................8Q-3
THERMOSTAT - 3.9L/5.2L/5.9L -
DESCRIPTION, ENGINE COOLANT.........7-49
THERMOSTAT - 3.9L/5.2L/5.9L -
INSTALLATION, ENGINE COOLANT........7-50
THERMOSTAT - 3.9L/5.2L/5.9L -
OPERATION, ENGINE COOLANT..........7-49
THERMOSTAT - 3.9L/5.2L/5.9L -
REMOVAL, ENGINE COOLANT............7-49
THERMOSTAT - 5.9L DIESEL -
DESCRIPTION, ENGINE COOLANT.........7-54
THERMOSTAT - 5.9L DIESEL -
INSTALLATION, ENGINE COOLANT........7-55
THERMOSTAT - 5.9L DIESEL -
OPERATION, ENGINE COOLANT..........7-54
THERMOSTAT - 5.9L DIESEL -
REMOVAL, ENGINE COOLANT............7-55
THERMOSTAT - 8.0L - DESCRIPTION,
ENGINE COOLANT.....................7-52
THERMOSTAT - 8.0L - INSTALLATION,
ENGINE COOLANT.....................7-53
THERMOSTAT - 8.0L - OPERATION,
ENGINE COOLANT.....................7-52
THERMOSTAT - 8.0L - REMOVAL,
ENGINE COOLANT.....................7-52
THERMOSTAT - DIAGNOSIS AND
TESTING....................7-49,7-52,7-54
THOMAS AND BETTS - INSTALLATION,
CONNECTOR.....................8W-01-10
THOMAS AND BETTS - REMOVAL,
CONNECTOR......................8W-01-9
THREAD REPAIR - STANDARD
PROCEDURE, ALUMINUM......21-159,21-330,
21-502,21-673
THREADED HOLE REPAIR -
DESCRIPTION......................Intro.-6
THREADS - STANDARD PROCEDURE,
REPAIR DAMAGED OR WORN . 9-11,9-125,9-181,
9-238,9-68
THROTTLE BODY - DESCRIPTION........14-48
THROTTLE BODY - OPERATION.........14-48
THROTTLE CONTROL CABLE -
INSTALLATION.................14-105,14-50
THROTTLE CONTROL CABLE -
REMOVAL....................14-104,14-50
THROTTLE POSITION SENSOR -
DESCRIPTION.......................14-51
THROTTLE POSITION SENSOR -
OPERATION.........................14-51
THROTTLE VALVE CABLE -
ADJUSTMENTS, TRANSMISSION
. 21-254,21-425,
21-598,21-771
THROTTLE VALVE CABLE -
DESCRIPTION
....21-253,21-424,21-597,21-770
TIMER MODULE - DESCRIPTION, BODY
CONTROL/CENTRAL
...................8E-1
TIMER MODULE - DIAGNOSIS AND
TESTING, CENTRAL
....................8E-4
TIMER MODULE - INSTALLATION, BODY
CONTROL/CENTRAL
...................8E-6TIMER MODULE - OPERATION, BODY
CONTROL/CENTRAL...................8E-3
TIMER MODULE - REMOVAL, BODY
CONTROL/CENTRAL...................8E-5
TIMING - DIAGNOSIS AND TESTING,
FUEL INJECTION PUMP...............14-66
TIMING BELT / CHAIN COVER(S) -
INSTALLATION........9-113,9-169,9-226,9-56
TIMING BELT / CHAIN COVER(S) -
REMOVAL............9-113,9-169,9-225,9-56
TIMING BELT/CHAIN AND SPROCKETS -
INSTALLATION........9-115,9-170,9-227,9-58
TIMING BELT/CHAIN AND SPROCKETS -
REMOVAL............9-114,9-170,9-226,9-57
TIMING BELT/CHAIN TENSIONER -
DESCRIPTION........................9-57
TIMING BELT/CHAIN TENSIONER -
OPERATION..........................9-57
TIMING CHAIN STRETCH - INSPECTION,
MEASURING..........9-114,9-170,9-227,9-58
TIMING, SPECIFICATIONS - IGNITION......8I-3
TIPS - CLEANING, APPEARANCE........30-21
TIRE - DESCRIPTION, SPARE............22-9
TIRE AND WHEEL BALANCE -
STANDARD PROCEDURES...............22-4
TIRE AND WHEEL RUNOUT - DIAGNOSIS
AND TESTING........................22-1
TIRE NOISE OR VIBRATION - DIAGNOSIS
AND TESTING........................22-8
TIRE PRESSURES - INSPECTION.........30-8
TIRE REVOLUTIONS PER MILE,
SPECIFICATIONS......................22-9
TIRE ROTATION - STANDARD
PROCEDURES........................22-2
TIRE WEAR PATTERNS - DIAGNOSIS
AND TESTING........................22-7
TIRE WINCH - INSTALLATION, SPARE....13-10
TIRE WINCH - REMOVAL, SPARE........13-10
TIRES - DESCRIPTION.............22-5,22-6
TO GROUND - STANDARD PROCEDURE,
TESTING FOR A SHORT.............8W-01-6
TO GROUND ON FUSES POWERING
SEVERAL LOADS - STANDARD
PROCEDURE, TESTING FOR SHORT....8W-01-7
TO OIL COOLER - INSTALLATION, AIR.....7-88
TO OIL COOLER - REMOVAL, AIR.........7-87
TO OIL COOLER - REMOVAL, WATER......7-87
TO USE WIRING DIAGRAMS -
DESCRIPTION, HOW................8W-01-1
TOOLS - 5.2L ENGINE, SPECIAL..........9-77
TOOLS - 5.9L DIESEL ENGINE, SPECIAL . . 9-244
TOOLS - 5.9L ENGINE, SPECIAL.........9-134
TOOLS - 8.0L ENGINE, SPECIAL.........9-188
TOOLS - AUDIO SYSTEMS, SPECIAL......8A-4
TOOLS - BASE BRAKES, SPECIAL.........5-4
TOOLS - COOLING, SPECIAL.............7-18
TOOLS - DIESEL FUEL SYSTEM,
SPECIAL...........................14-59
TOOLS - FRONT AXLE, SPECIAL..........3-58
TOOLS - FRONT AXLES, SPECIAL.........3-25
TOOLS - FUEL SYSTEM, SPECIAL . . . 14-36,14-4
TOOLS - HEADLAMP ALIGNMENT,
SPECIAL............................8L-4
TOOLS - INDEPENDENT FRONT
SUSPENSION, SPECIAL..................2-9
TOOLS - LINK/COIL SUSPENSION,
SPECIAL
............................2-16
TOOLS - NV5600 MANUAL
TRANSMISSION, SPECIAL
.............21-127
TOOLS - OVERHEAD CONSOLE
SYSTEMS, SPECIAL
...................8M-8
TOOLS - POWER DISTRIBUTION
SYSTEMS, SPECIAL
................8W-97-2
TOOLS - POWER STEERING GEAR,
SPECIAL
...........................19-20
TOOLS - POWER STEERING PUMP,
SPECIAL
...........................19-36
TOOLS - PROPELLER SHAFT, SPECIAL
......3-8
TOOLS - RE TRANSMISSION, SPECIAL
. . 21-534,
21-704
TOOLS - RE TRANSMISSIONS, SPECIAL
. 21-188,
21-359
TOOLS - STEERING LINKAGE, SPECIAL
. . . 19-39,
19-42
TOOLS - SUSPENSION-REAR, SPECIAL
....2-28
TOOLS, AIRBAG SYSTEM - SPECIAL
......8O-6
TOOLS, WIRING/TERMINAL - SPECIAL
. 8W-01-8
BR/BEINDEX 35
Description Group-Page Description Group-Page Description Group-Page
Page 2886 of 2889
WATER IN FUEL SENSOR - REMOVAL....14-85
WATER LEAKS - DIAGNOSIS AND
TESTING............................23-2
WATER PUMP - 3.9L/5.2L/5.9L -
CLEANING...........................7-69
WATER PUMP - 3.9L/5.2L/5.9L -
DESCRIPTION........................7-67
WATER PUMP - 3.9L/5.2L/5.9L -
INSPECTION.........................7-69
WATER PUMP - 3.9L/5.2L/5.9L -
INSTALLATION........................7-70
WATER PUMP - 3.9L/5.2L/5.9L -
OPERATION..........................7-67
WATER PUMP - 3.9L/5.2L/5.9L -
REMOVAL...........................7-67
WATER PUMP - 5.9L DIESEL -
CLEANING...........................7-73
WATER PUMP - 5.9L DIESEL -
DESCRIPTION........................7-73
WATER PUMP - 5.9L DIESEL -
INSPECTION.........................7-73
WATER PUMP - 5.9L DIESEL -
INSTALLATION........................7-74
WATER PUMP - 5.9L DIESEL -
OPERATION..........................7-73
WATER PUMP - 5.9L DIESEL - REMOVAL . . 7-73
WATER PUMP - 8.0L - CLEANING........7-72
WATER PUMP - 8.0L - INSPECTION.......7-72
WATER PUMP - 8.0L - INSTALLATION.....7-72
WATER PUMP - 8.0L - REMOVAL.........7-70
WATER PUMP - DIAGNOSIS AND
TESTING......................7-67,7-70,7-73
WATER PUMP BYPASS HOSE WITH AIR
CONDITIONING - INSTALLATION..........7-77
WATER PUMP BYPASS HOSE WITH AIR
CONDITIONING - REMOVAL.............7-74
WATER PUMP BYPASS HOSE WITHOUT
AIR CONDITIONING - INSTALLATION......7-78
WATER PUMP BYPASS HOSE WITHOUT
AIR CONDITIONING - REMOVAL..........7-77
WATER SEPARATOR - DESCRIPTION,
FUEL FILTER........................14-59
WATER SEPARATOR - INSTALLATION,
FUEL FILTER........................14-61
WATER SEPARATOR - OPERATION, FUEL
FILTER.............................14-59
WATER SEPARATOR - REMOVAL, FUEL
FILTER.............................14-60
WATER TO OIL COOLER - REMOVAL......7-87
WATERDAM - INSTALLATION......23-75,23-85
WATERDAM - REMOVAL..........23-75,23-85
WATER-IN-FUEL INDICATOR -
DESCRIPTION.......................8J-36
WATER-IN-FUEL INDICATOR -
OPERATION.........................8J-37
WAY CHECK VALVE - DESCRIPTION, ONE . 25-30
WAY CHECK VALVE - INSTALLATION,
ONE ...............................25-30
WAY CHECK VALVE - OPERATION, ONE . . . 25-30
WAY CHECK VALVE - REMOVAL, ONE....25-30
WEAR INDICATORS - DIAGNOSIS AND
TESTING, TREAD......................22-7
WEAR PATTERNS - DIAGNOSIS AND
TESTING, TIRE.......................22-7
WEATHERSTRIP - INSTALLATION, COWL . 23-153
WEATHERSTRIP - INSTALLATION, FRONT
DOOR GLASS RUN..................23-154WEATHERSTRIP - INSTALLATION, FRONT
DOOR INNER BELT..................23-154
WEATHERSTRIP - INSTALLATION, FRONT
DOOR OUTER BELT..................23-154
WEATHERSTRIP - INSTALLATION, FRONT
DOOR SECOND.....................23-155
WEATHERSTRIP - REMOVAL, COWL.....23-153
WEATHERSTRIP - REMOVAL, FRONT
DOOR GLASS RUN..................23-153
WEATHERSTRIP - REMOVAL, FRONT
DOOR INNER BELT..................23-154
WEATHERSTRIP - REMOVAL, FRONT
DOOR OUTER BELT..................23-154
WEATHERSTRIP - REMOVAL, FRONT
DOOR SECOND.....................23-154
WELD LOCATIONS, SPECIFICATIONS......23-4
WET SANDING/BUFFING & POLISHING -
DESCRIPTION......................23-130
WHEEL - INSTALLATION, STEERING......19-13
WHEEL - REMOVAL, STEERING.........19-13
WHEEL ALIGNMENT - DESCRIPTION.......2-1
WHEEL ALIGNMENT - OPERATION.........2-2
WHEEL BALANCE - STANDARD
PROCEDURES, TIRE...................22-4
WHEEL COVER - REMOVAL............22-12
WHEEL COVERS - INSTALLATION........30-10
WHEEL CYLINDERS - ASSEMBLY.........5-31
WHEEL CYLINDERS - CLEANING.........5-31
WHEEL CYLINDERS - DISASSEMBLY......5-31
WHEEL CYLINDERS - INSPECTION........5-31
WHEEL CYLINDERS - INSTALLATION......5-32
WHEEL CYLINDERS - REMOVAL..........5-31
WHEEL INSPECTION - DIAGNOSIS AND
TESTING
...........................22-10
WHEEL INSTALLATION - STARDARD
PROCEDURE, DUAL REAR
.............22-10
WHEEL RUNOUT - DIAGNOSIS AND
TESTING, TIRE
.......................22-1
WHEELHOUSE LINER - INSTALLATION,
REAR
..............................23-96
WHEELHOUSE LINER - REMOVAL, REAR
. . 23-96
WHEELS - DESCRIPTION
...............22-9
WHEELS - OPERATION
................22-10
WINCH - INSTALLATION, SPARE TIRE
....13-10
WINCH - REMOVAL, SPARE TIRE
........13-10
WIND NOISE - DIAGNOSIS AND TESTING
. . 23-3
WIND NOISE - INSPECTION, SQUEAKS,
RATTLES
...........................30-15
WINDOW - INSTALLATION, QUARTER
. . . 23-151
WINDOW - INSTALLATION, VENT
........23-85
WINDOW - REMOVAL, QUARTER
.......23-151
WINDOW - REMOVAL, VENT
............23-85
WINDOW MOTOR - DESCRIPTION
.......8N-26
WINDOW MOTOR - DIAGNOSIS AND
TESTING
...........................8N-26
WINDOW MOTOR - REMOVAL
..........8N-26
WINDOW REGULATOR - INSTALLATION
. . . 23-76
WINDOW REGULATOR - REMOVAL
......23-75
WINDOW SWITCH - DESCRIPTION,
POWER
............................8N-24
WINDOW SWITCH - DIAGNOSIS AND
TESTING, POWER
....................8N-24
WINDOW SWITCH - INSTALLATION,
POWER
............................8N-26WINDOW SWITCH - OPERATION, POWER . 8N-24
WINDOW SWITCH - REMOVAL, POWER . . 8N-25
WINDOWS - DESCRIPTION, POWER.....8N-23
WINDOWS - DIAGNOSIS AND TESTING,
POWER............................8N-23
WINDOWS - OPERATION, POWER.......8N-23
WINDOWS, DOORS AND LOCKS -
INSPECTION........................30-14
WINDSHIELD - DESCRIPTION..........23-148
WINDSHIELD - INSTALLATION.........23-148
WINDSHIELD - REMOVAL.............23-148
WINDSHIELD WIPERS/WASHERS, ROAD
TEST - INSPECTION..................30-18
WIPER & WASHER SYSTEM - CLEANING . . 8R-6
WIPER & WASHER SYSTEM -
DIAGNOSIS AND TESTING..............8R-3
WIPER & WASHER SYSTEM -
INSPECTION.........................8R-6
WIPER ARM - DESCRIPTION...........8R-11
WIPER ARM - INSTALLATION...........8R-12
WIPER ARM - OPERATION.............8R-12
WIPER ARM - REMOVAL..............8R-12
WIPER BLADE - DESCRIPTION..........8R-12
WIPER BLADE - INSTALLATION.........8R-13
WIPER BLADE - OPERATION...........8R-13
WIPER BLADE - REMOVAL.............8R-13
WIPER MODULE - DESCRIPTION
........8R-14
WIPER MODULE - INSTALLATION
.......8R-15
WIPER MODULE - OPERATION
..........8R-14
WIPER MODULE - REMOVAL
...........8R-14
WIPER RELAY - DESCRIPTION
..........8R-15
WIPER RELAY - DIAGNOSIS AND
TESTING
...........................8R-16
WIPER RELAY - INSTALLATION
.........8R-17
WIPER RELAY - OPERATION
...........8R-15
WIPER RELAY - REMOVAL
.............8R-17
WIPERS/WASHERS - DESCRIPTION
.......8R-1
WIPERS/WASHERS - OPERATION
........8R-2
WIPERS/WASHERS, ROAD TEST -
INSPECTION WINDSHIELD
.............30-18
WIRE SPLICING - STANDARD
PROCEDURE
.....................8W-01-12
WIRING - INSPECTION
.................30-7
WIRING DIAGRAMS - DESCRIPTION,
HOW TO USE
.....................8W-01-1
WIRING HARNESS - DIAGNOSIS AND
TESTING
.........................8W-01-5
WIRING/TERMINAL - SPECIAL TOOLS
. . 8W-01-8
WITHOUT AIR CONDITIONING -
INSTALLATION, WATER PUMP BYPASS
HOSE
...............................7-78
WITHOUT AIR CONDITIONING -
REMOVAL, WATER PUMP BYPASS
HOSE
...............................7-77
WITHOUT RADIATOR IN-TANK
TRANSMISSION OIL COOLER -
STANDARD PROCEDURE, FLUSHING
COOLER AND TUBES
..........7-80,7-83,7-86
WORM SHAFT - INSTALLATION
.........19-29
WORM SHAFT - REMOVAL
.............19-27
WORN THREADS - STANDARD
PROCEDURE, REPAIR
DAMAGED OR
.....9-11,9-125,9-181,9-238,9-68
BR/BEINDEX 39
Description Group-Page Description Group-Page Description Group-Page