radio DODGE RAM 2002 Service Manual PDF

²Glove Box- The hinged bin-type glove box in
the passenger side of the instrument panel features a
recessed paddle-operated latch handle. Three molded
hook formations on the lower edge of the glove box
door are engaged with and pivot on three hinge pins
integral to the lower edge of the instrument panel
support structure. The glove box door also serves as
the passenger side knee blocker. A honeycomb struc-
ture between the inner and outer glove box door pan-
els helps to absorb the impact load and distribute it
to the instrument panel structure.
²Steering Column Opening Cover- The steer-
ing column opening cover serves as the driver side
knee blocker. This molded plastic cover has an inte-
gral ribbed plastic liner concealed behind it, for
increased strength and integrity. The steering column
opening cover transfers impact loads to the instru-
ment panel structural support.
²Top Cover- The instrument panel top cover or
base trim is the molded, grained, and color impreg-
nated plastic outer skin of the instrument panel
structural support.
Hard wired circuitry connects the electrical compo-
nents on the instrument panel to each other through
the electrical system of the vehicle. These hard wired
circuits are integral to several wire harnesses, which
are routed throughout the vehicle and retained by
many different methods. These circuits may be con-
nected to each other, to the vehicle electrical system
and to the instrument panel components through the
use of a combination of soldered splices, splice block
connectors and many different types of wire harness
terminal connectors and insulators. Refer to the
appropriate wiring information. The wiring informa-
tion includes complete circuit diagrams, proper wire
and connector repair procedures, further details on
wire harness routing and retention, as well as pin-
out and location views for the various wire harness
connectors, splices, and grounds.
OPERATION
The instrument panel serves as the command cen-
ter of the vehicle, which necessarily makes it a very
complex unit. The instrument panel is designed to
house the controls and monitors for standard and
optional powertrains, climate control systems, audio
systems, safety systems, and many other comfort or
convenience items. When the components of the
instrument panel structural support are properly
assembled and secured in the vehicle they provide
superior instrument panel stiffness and integrity to
help reduce buzzes, squeaks, and rattles. This type of
construction also provides improved energy absorp-
tion which, in conjunction with the dual airbags and
seat belts, helps to improve occupant protection.The instrument panel is also designed so that all of
the various controls can be safely reached and the
monitors can be easily viewed by the vehicle operator
when driving, while still allowing relative ease of
access to each of these items for service. Modular
instrument panel construction allows all of the
gauges and controls to be serviced from the front of
the panel. In addition, most of the instrument panel
electrical components can be accessed without com-
plete instrument panel removal. However, if neces-
sary, the instrument panel can be removed from the
vehicle as an assembly.
The steering column opening cover with its inte-
gral knee blocker located on the driver side of the
instrument panel works in conjunction with the air-
bag system in a frontal vehicle impact to keep the
driver properly positioned for an airbag deployment.
In addition, removal of this component provides
access to the steering column mounts, the steering
column wiring, the Junction Block (JB) (removal of a
snap-fit fuse access panel on the left end of the
instrument panel allows access to the fuses and cir-
cuit breakers), the Central Timer Module (CTM), the
Infinity speaker filter choke and relay unit, much of
the instrument panel wiring, and the gear selector
indicator cable (automatic transmission).
In a frontal collision, the glove box door on the pas-
senger side of the instrument panel provides the
same function for the front seat passenger as the
knee blocker does for the driver. The glove box door
also incorporates a recessed latch handle. Removal of
the glove box provides access to the passenger airbag,
the glove box lamp and switch, the radio antenna
coaxial cable, the heating and air conditioning vac-
uum harness connector, and additional instrument
panel wiring.
Removal of the instrument panel cluster bezel
allows access to the headlamp switch, instrument
cluster, radio, passenger airbag on-off switch, heated
seat switches (if equipped), and the heating and air
conditioning control. Removal of the instrument clus-
ter allows access to the cluster illumination and indi-
cator bulbs, and more of the instrument panel
wiring. Complete instrument panel removal is
required for service of most components internal to
the heating and air conditioning system housing,
including the heater core and the evaporator.
See the owner's manual in the vehicle glove box for
more information on the features, use and operation
of all of the components and systems mounted on or
in the instrument panel.
23 - 106 INSTRUMENT PANEL SYSTEMBR/BE
INSTRUMENT PANEL SYSTEM (Continued)

left cowl side inner panel. (Refer to 5 - BRAKES/
PARKING BRAKE/RELEASE - REMOVAL).
(b) Disconnect the instrument panel wire har-
ness connector from the park brake switch on the
park brake mechanism.
(c) Disconnect the three connectors (one from the
body wire harness, and two from the headlamp and
dash wire harness) from the three connector recep-
tacles located closest to the dash panel on the back
of the Junction Block (JB).
(d) Remove the screw from the center of the
headlamp and dash wire harness to instrument
panel wire harness bulkhead connector and discon-
nect the connector.
(e) Disconnect the instrument panel wire har-
ness to door wire harness connector located directly
below the instrument panel wire harness to head-
lamp and dash wire harness bulkhead connector.
(f) If the vehicle is equipped with the Infinity
sound system option, disconnect the Infinity wire
harness connector from the instrument panel wire
harness connector that is secured to the outboard
side of the instrument panel wire harness to head-
lamp and dash wire harness bulkhead connector.(g) Disconnect the instrument panel wire har-
ness connector from the stop lamp switch.
(h) Disconnect the heater-A/C housing vacuum
harness connector from the heater-A/C control vac-
uum harness connector located near the left end of
the heater-A/C housing.
(10) From under the passenger side of the instru-
ment panel, disconnect the two halves of the radio
antenna coaxial cable connector.
(11) Loosen the right and left instrument panel
cowl side roll-down bracket screws about 13 mm
(0.50 inch) (Fig. 11).
(12) Remove the five screws that secure the top of
the instrument panel to the top of the dash panel,
removing the center screw last.
(13) Roll down the instrument panel and install a
temporary hook in the center hole on top of the
instrument panel. Secure the other end of the hook
to the center hole in the top of the dash panel. The
hook should support the instrument panel in its
rolled down position about 46 cm (18 inches) from
the dash panel.
(14) With the instrument panel supported in the
roll-down position, disconnect the instrument panel
Fig. 11 Instrument Panel Assembly Remove/Install
1 - PLASTIC NUT
2 - SCREWS3 - SCREWS
23 - 116 INSTRUMENT PANEL SYSTEMBR/BE
INSTRUMENT PANEL ASSEMBLY (Continued)

wire harness connectors from the heater-A/C housing
wire harness connectors.
(15) With the aid of an assistant, remove the tem-
porary hook and lift the instrument panel assembly
off of the roll-down bracket screws and remove it
from the vehicle.
INSTALLATION
WARNING: ON VEHICLES EQUIPPED WITH AIRBAGS,
DISABLE THE AIRBAG SYSTEM BEFORE ATTEMPT-
ING ANY STEERING WHEEL, STEERING COLUMN,
SEAT BELT TENSIONER, OR INSTRUMENT PANEL
COMPONENT DIAGNOSIS OR SERVICE. DISCONNECT
AND ISOLATE THE BATTERY NEGATIVE (GROUND)
CABLE, THEN WAIT TWO MINUTES FOR THE AIRBAG
SYSTEM CAPACITOR TO DISCHARGE BEFORE PER-
FORMING FURTHER DIAGNOSIS OR SERVICE. THIS IS
THE ONLY SURE WAY TO DISABLE THE AIRBAG SYS-
TEM. FAILURE TO TAKE THE PROPER PRECAUTIONS
COULD RESULT IN ACCIDENTAL AIRBAG DEPLOY-
MENT AND POSSIBLE PERSONAL INJURY.
(1)With the aid of an assistant, load the instrument
panel assembly onto the roll-down bracket screws on
the cowl side inner panels in the vehicle (Fig. 11).
Install a temporary hook in the center hole on top of the
instrument panel. Secure the other end of the hook to
the center hole in the top of the dash panel. The hook
should support the instrument panel in its rolled down
position about 46 cm (18 inches) from the dash panel.
(2) With the instrument panel supported in the
roll-down position, reconnect the instrument panel
wire harness connectors to the heater-A/C housing
wire harness connectors.
(3) Remove the temporary hook from the instru-
ment panel and roll the instrument panel up to its
installed position against the dash panel.
(4) Install and tighten the five screws that secure
the top of the instrument panel to the top of the dash
panel. Tighten the screws to 3.2 N´m (28 in. lbs.).
(5) Tighten the right and left instrument panel
cowl side roll-down bracket screws. Tighten the
screws to 11.9 N´m (105 in. lbs.).
(6) From under the passenger side of the instru-
ment panel, reconnect the two halves of the radio
antenna coaxial cable connector.
(7) From under the driver side of the instrument
panel, perform the following:
(a) Engage the park brake release handle link-
age rod with the park brake mechanism on the left
cowl side inner panel. (Refer to 5 - BRAKES/PARK-
ING BRAKE/RELEASE - INSTALLATION).
(b) Reconnect the instrument panel wire harness
connector to the park brake switch on the park
brake mechanism.(c) Reconnect the three connectors (one from the
body wire harness, and two from the headlamp and
dash wire harness) to the three connector recepta-
cles located closest to the dash panel on the back of
the Junction Block (JB).
(d)
Reconnect the headlamp and dash wire harness
to instrument panel wire harness bulkhead connector
and tighten the screw in the center of the connector.
Tighten the screw to 3.5 N´m (31 in. lbs.).
(e) Reconnect the instrument panel wire harness
to door wire harness connector located directly
below the instrument panel wire harness to head-
lamp and dash wire harness bulkhead connector.
(f) If the vehicle is equipped with the Infinity
sound system option, reconnect the Infinity wire
harness connector to the instrument panel wire
harness connector that is secured to the outboard
side of the instrument panel wire harness to head-
lamp and dash wire harness bulkhead connector.
(g) Reconnect the instrument panel wire harness
connector to the stop lamp switch.
(h) Reconnect the heater-A/C housing vacuum
harness connector to the heater-A/C control vac-
uum harness connector located near the left end of
the heater-A/C housing.
(8) Reinstall the steering column into the vehicle.
Be certain that the steering wheel was locked and
secured from rotation to prevent the loss of clock-
spring centering. (Refer to 19 - STEERING/COL-
UMN - INSTALLATION).
(9) If the vehicle is so equipped, reconnect the
overdrive lockout switch pigtail wire connector to the
instrument panel wire harness connector near the
instrument panel lower reinforcement.
(10) Reconnect the clockspring pigtail wire connec-
tor to the instrument panel wire harness connector
at the instrument panel lower reinforcement.
(11) Position the inside hood latch release handle
to the instrument panel lower reinforcement.
(12) Install and tighten the two screws that secure
the inside hood latch release handle to the instru-
ment panel lower reinforcement. Tighten the screws
to 2.8 N´m (25 in. lbs.).
(13) Reinstall the steering column opening cover
onto the instrument panel. (Refer to 23 - BODY/IN-
STRUMENT PANEL/STEERING COLUMN OPEN-
ING COVER - INSTALLATION).
(14) Reinstall the trim onto the left and right cowl
side inner panels. (Refer to 23 - BODY/INTERIOR/
COWL TRIM COVER - INSTALLATION).
(15) Reinstall the Airbag Control Module (ACM)
and bracket onto the floor panel transmission tunnel.
(Refer to 8 - ELECTRICAL/RESTRAINTS/AIRBAG
CONTROL MODULE - INSTALLATION).
(16) Reconnect the battery negative cable.
BR/BEINSTRUMENT PANEL SYSTEM 23 - 117
INSTRUMENT PANEL ASSEMBLY (Continued)

CENTRAL TIMER MODULE - REMOVAL....8E-5
CERTIFICATION LABEL - DESCRIPTION,
VEHICLE SAFETY...................Intro.-1
CHAIN COVER(S) - INSTALLATION,
TIMING BELT....................9-110,9-54
CHAIN COVER(S) - REMOVAL, TIMING
BELT ..........................9-110,9-53
CHAIN STRETCH - INSPECTION,
MEASURING TIMING..............9-111,9-54
CHANNEL - INSTALLATION, GLASS RUN . . 23-71
CHANNEL - REMOVAL, GLASS RUN......23-71
CHARGE - STANDARD PROCEDURE,
REFRIGERANT SYSTEM...............24-46
CHARGE AIR COOLER AND PLUMBING -
CLEANING..........................11-19
CHARGE AIR COOLER AND PLUMBING -
DESCRIPTION.......................11-18
CHARGE AIR COOLER AND PLUMBING -
INSPECTION........................11-19
CHARGE AIR COOLER AND PLUMBING -
INSTALLATION.......................11-20
CHARGE AIR COOLER AND PLUMBING -
OPERATION.........................11-18
CHARGE AIR COOLER AND PLUMBING -
REMOVAL..........................11-18
CHARGE AIR COOLER SYSTEM - LEAKS
- DIAGNOSIS AND TESTING............11-18
CHARGING - DESCRIPTION.............8F-25
CHARGING - OPERATION..............8F-25
CHARGING - STANDARD PROCEDURE,
BATTERY............................8F-8
CHARGING SYSTEM - DIAGNOSIS AND
TESTING...........................8F-25
CHART, SPECIFICATIONS - TORQUE....5-3,5-37
CHART, SPECIFICATIONS -
TORQUE.............19-21,19-41,19-43,19-9
CHART, SPECIFICATIONS -
TORQUE.....................2-15,2-26,2-8
CHART, SPECIFICATIONS - TORQUE......22-11
CHARTS - DIAGNOSIS AND TESTING,
DIAGNOSIS..................21-102,21-274
CHARTS - DIAGNOSIS AND TESTING,
SMOKE DIAGNOSIS...................9-118
CHASSIS ADAPTER BRACKET -
INSTALLATION, CAB..................13-10
CHASSIS ADAPTER BRACKET -
REMOVAL, CAB......................13-10
CHECK - INSTALLATION...............23-78
CHECK - REMOVAL...................23-78
CHECK - STANDARD PROCEDURE,
COOLANT LEVEL......................7-16
CHECK - STANDARD PROCEDURE, FLUID
LEVEL......................21-157,21-328
CHECK - STANDARD PROCEDURE, OIL
PUMP VOLUME...............21-166,21-336
CHECK CABLE - INSTALLATION.........23-67
CHECK CABLE - REMOVAL.............23-67
CHECK GAUGES INDICATOR -
DESCRIPTION.......................8J-17
CHECK GAUGES INDICATOR -
OPERATION.........................8J-17
CHECK VALVE - DESCRIPTION, FUEL
TANK ..............................14-21
CHECK VALVE - DESCRIPTION, ONE WAY . 25-31
CHECK VALVE - DESCRIPTION, VACUUM . . 24-28
CHECK VALVE - DIAGNOSIS AND
TESTING, ONE-WAY..................25-31
CHECK VALVE - INSTALLATION, FUEL
TANK ..............................14-23
CHECK VALVE - INSTALLATION, ONE
WAY...............................25-31
CHECK VALVE - INSTALLATION, VACUUM
. 24-29
CHECK VALVE - OPERATION, ONE WAY
. . . 25-31
CHECK VALVE - OPERATION, VACUUM
....24-28
CHECK VALVE - REMOVAL, FUEL TANK
. . . 14-22
CHECK VALVE - REMOVAL, ONE WAY
....25-31
CHECK VALVE - REMOVAL, VACUUM
.....24-29
CHECKS - DIAGNOSIS AND TESTING,
PRELIMINARY
.........................7-4
CHILD TETHER - INSTALLATION
..........8O-9
CHILD TETHER - REMOVAL
.............8O-9
CHIME WARNING SYSTEM -
DESCRIPTION
........................8B-1
CHIME WARNING SYSTEM - DIAGNOSIS
AND TESTING
........................8B-2
CHIME WARNING SYSTEM - OPERATION
. . . 8B-1
CHOKE RELAY - DESCRIPTION, RADIO
....8A-7CHOKE RELAY - DIAGNOSIS AND
TESTING, RADIO......................8A-8
CHOKE RELAY - INSTALLATION, RADIO....8A-9
CHOKE RELAY - OPERATION, RADIO......8A-8
CHOKE RELAY - REMOVAL, RADIO.......8A-8
CIGAR LIGHTER OUTLET - DESCRIPTION . 8W-97-2
CIGAR LIGHTER OUTLET - DIAGNOSIS
AND TESTING.....................8W-97-2
CIGAR LIGHTER OUTLET -
INSTALLATION....................8W-97-4
CIGAR LIGHTER OUTLET - OPERATION . 8W-97-2
CIGAR LIGHTER OUTLET - REMOVAL . . 8W-97-3
CIRCUIT ACTUATION TEST MODE -
DESCRIPTION........................25-2
CIRCUIT BREAKER - DESCRIPTION....8W-97-4
CIRCUIT BREAKER - DIAGNOSIS AND
TESTING.........................8W-97-4
CIRCUIT FUNCTIONS - DESCRIPTION . . 8W-01-4
CIRCUIT INFORMATION - DESCRIPTION . 8W-01-4
CIRCUIT SENSE - DESCRIPTION,
IGNITION...........................8E-17
CIRCUIT SENSE - OPERATION, IGNITION . . 8E-19
CIRCUITS - DIESEL - OPERATION,
NON-MONITORED....................25-24
CIRCUITS - GAS ENGINES - OPERATION,
NON-MONITORED....................25-24
CLAMPS - DESCRIPTION, HOSE...........7-4
CLAMPS - OPERATION, HOSE.............7-4
CLASSIFICATION OF LUBRICANTS -
STANDARD PROCEDURE..................0-1
CLEANER ELEMENT - INSTALLATION,
AIR ...............................9-130
CLEANER ELEMENT - REMOVAL, AIR.....9-129
CLEANING AND INSPECTION, OIL
COOLER & LINES....................9-179
CLEANING, BATTERY SYSTEM...........8F-5
CLEANING, CHARGE AIR COOLER AND
PLUMBING.........................11-19
CLEANING, CROSSHEADS..............9-134
CLEANING, CYLINDER HEAD.......9-134,9-77
CLEANING, CYLINDER HEAD
COVER(S)..................9-137,9-23,9-79
CLEANING, ENGINE BLOCK..........9-27,9-85
CLEANING, EXHAUST
MANIFOLD.................9-109,9-185,9-53
CLEANING, FRONT SERVO......21-164,21-334
CLEANING FUEL SYSTEM PARTS -
STANDARD PROCEDURES..............14-61
CLEANING, HYDRAULIC LIFTERS.....9-37,9-92
CLEANING, INTAKE MANIFOLD . 9-107,9-184,9-51
CLEANING, INTAKE/EXHAUST VALVES &
SEATS ..............................9-26
CLEANING, MANUAL - NV4500..........21-20
CLEANING, MANUAL - NV5600..........21-63
CLEANING, OIL PAN.........9-103,9-179,9-46
CLEANING, OIL PRESSURE RELIEF
VALVE .............................9-180
CLEANING, OIL PUMP............9-104,9-181
CLEANING, OIL PUMP..........21-168,21-338
CLEANING, OPERATION.................9-22
CLEANING, OVERDRIVE UNIT....21-179,21-353
CLEANING, OVERRUNNING CLUTCH
CAM/OVERDRIVE PISTON
RETAINER...................21-192,21-364
CLEANING, PISTON & CONNECTING
ROD.......................9-169,9-39,9-94
CLEANING, PUSHRODS................9-134
CLEANING, RADIATOR - 5.9L............7-59
CLEANING, RADIATOR - 5.9L DIESEL......7-64
CLEANING, RADIATOR - 8.0L............7-61
CLEANING, RADIATOR FAN - 5.9L
DIESEL.............................7-43
CLEANING, RADIATOR FAN - 5.9L/8.0L....7-42
CLEANING, REAR CLUTCH
......21-204,21-377
CLEANING, REAR SERVO
.......21-207,21-379
CLEANING, ROCKER ARM / ADJUSTER
ASSY
..............................9-146
CLEANING, SOLID LIFTERS/TAPPETS
.....9-164
CLEANING, SPARK PLUG
...............8I-20
CLEANING, TRANSFER CASE - NV241HD
. 21-476
CLEANING, TRANSFER CASE - NV241LD
. 21-441
CLEANING, TURBOCHARGER
...........11-16
CLEANING, VALVE BODY
........21-244,21-418
CLEANING, WATER PUMP - 5.9L
.........7-68
CLEANING, WATER PUMP - 5.9L DIESEL
. . . 7-72
CLEANING, WATER PUMP - 8.0L
.........7-71
CLEANING, WIPER & WASHER SYSTEM
. . . 8R-6CLEANING/REVERSE FLUSHING -
STANDARD PROCEDURE, COOLING
SYSTEM............................7-17
CLEARANCE - STANDARD PROCEDURE,
CONNECTING ROD BEARING AND
CRANKSHAFT JOURNAL...............9-158
CLEARANCE - STANDARD PROCEDURE,
MAIN BEARING......................9-159
CLEARANCE LAMP - INSTALLATION.......8L-7
CLEARANCE LAMP - REMOVAL..........8L-7
CLOCKSPRING - DESCRIPTION.........8O-10
CLOCKSPRING - INSTALLATION.........8O-13
CLOCKSPRING - OPERATION...........8O-10
CLOCKSPRING - REMOVAL............8O-12
CLOCKSPRING CENTERING - STANDARD
PROCEDURE........................8O-11
CLOSURE PANEL TRIM - INSTALLATION,
REAR.............................23-121
CLOSURE PANEL TRIM - REMOVAL,
REAR.............................23-120
CLUB/QUAD CAB - INSTALLATION.......8O-20
CLUB/QUAD CAB - REMOVAL...........8O-19
CLUSTER - ASSEMBLY, INSTRUMENT....8J-12
CLUSTER - DESCRIPTION, INSTRUMENT . . . 8J-2
CLUSTER - DIAGNOSIS AND TESTING,
INSTRUMENT........................8J-6
CLUSTER - DISASSEMBLY, INSTRUMENT . . 8J-10
CLUSTER - INSTALLATION, INSTRUMENT . 8J-13
CLUSTER - OPERATION, INSTRUMENT.....8J-3
CLUSTER - REMOVAL, INSTRUMENT......8J-10
CLUSTER BEZEL - INSTALLATION.......23-108
CLUSTER BEZEL - REMOVAL..........23-108
CLUTCH - 5.9L DIESEL - DESCRIPTION,
FAN DRIVE VISCOUS...................7-56
CLUTCH - 5.9L DIESEL - OPERATION,
FAN DRIVE VISCOUS...................7-56
CLUTCH - 5.9L/8.0L - DESCRIPTION,
FAN DRIVE VISCOUS...................7-55
CLUTCH - 5.9L/8.0L - OPERATION, FAN
DRIVE VISCOUS......................7-55
CLUTCH - ASSEMBLY, FRONT....21-162,21-333
CLUTCH - ASSEMBLY, REAR.....21-205,21-377
CLUTCH - CLEANING, REAR.....21-204,21-377
CLUTCH - DESCRIPTION.................6-1
CLUTCH - DESCRIPTION, A/C
COMPRESSOR.......................24-11
CLUTCH - DESCRIPTION, FRONT . 21-160,21-330
CLUTCH - DESCRIPTION, OVERDRIVE . . . 21-172,
21-343
CLUTCH - DESCRIPTION, REAR . . 21-203,21-375
CLUTCH - DIAGNOSIS AND TESTING
.......6-2
CLUTCH - DISASSEMBLY, FRONT
. 21-161,21-331
CLUTCH - DISASSEMBLY, REAR
. . 21-204,21-376
CLUTCH - INSPECTION, A/C
COMPRESSOR
.......................24-15
CLUTCH - INSPECTION, FRONT
. . 21-162,21-332
CLUTCH - INSPECTION, REAR
. . . 21-204,21-377
CLUTCH - INSTALLATION, A/C
COMPRESSOR
.......................24-15
CLUTCH - OPERATION
..................6-2
CLUTCH - OPERATION, A/C
COMPRESSOR
.......................24-13
CLUTCH - OPERATION, FRONT
. . . 21-160,21-330
CLUTCH - OPERATION, OVERDRIVE
....21-172,
21-343
CLUTCH - OPERATION, REAR
....21-203,21-375
CLUTCH - REMOVAL, A/C COMPRESSOR
. . 24-13
CLUTCH - SPECIFICATIONS
...............6-7
CLUTCH - WARNING
....................6-2
CLUTCH AND BAND OPERATION -
DIAGNOSIS AND TESTING, AIR
TESTING TRANSMISSION
.......21-100,21-272
CLUTCH BREAK-IN - STANDARD
PROCEDURE, A/C COMPRESSOR
........24-13
CLUTCH CAM/OVERDRIVE PISTON
RETAINER - ASSEMBLY,
OVERRUNNING
...............21-193,21-364
CLUTCH CAM/OVERDRIVE PISTON
RETAINER - CLEANING, OVERRUNNING
. 21-192,
21-364
CLUTCH CAM/OVERDRIVE PISTON
RETAINER - DESCRIPTION,
OVERRUNNING
...............21-192,21-363
CLUTCH CAM/OVERDRIVE PISTON
RETAINER - DISASSEMBLY,
OVERRUNNING
...............21-192,21-364
6 INDEXBR/BE
Description Group-Page Description Group-Page Description Group-Page

MINI-TRIP COMPUTER - DIAGNOSIS
AND TESTING, COMPASS.............8M-10
MIRROR - DESCRIPTION, AUTOMATIC
DAY / NIGHT........................8N-11
MIRROR - DESCRIPTION, SIDEVIEW.....8N-14
MIRROR - DIAGNOSIS AND TESTING,
AUTOMATIC DAY/NIGHT...............8N-12
MIRROR - DIAGNOSIS AND TESTING,
SIDEVIEW..........................8N-14
MIRROR - INSTALLATION, AUTOMATIC
DAY / NIGHT........................8N-13
MIRROR - INSTALLATION, SIDE VIEW....23-98
MIRROR - LOW MOUNTED -
INSTALLATION, SIDE VIEW.............23-98
MIRROR - LOW MOUNTED - REMOVAL,
SIDE VIEW..........................23-98
MIRROR - OPERATION, AUTOMATIC DAY
/ NIGHT............................8N-12
MIRROR - OPERATION, SIDEVIEW.......8N-14
MIRROR - REMOVAL, AUTOMATIC DAY /
NIGHT.............................8N-13
MIRROR - REMOVAL, REAR VIEW......23-126
MIRROR - REMOVAL, SIDE VIEW........23-97
MIRROR - REMOVAL, SIDEVIEW........8N-15
MIRROR FLAG - INSTALLATION, SIDE
VIEW..............................23-75
MIRROR FLAG - REMOVAL, SIDE VIEW . . . 23-74
MIRROR GLASS - INSTALLATION, SIDE
VIEW..............................23-98
MIRROR GLASS - REMOVAL, SIDE VIEW . . 23-98
MIRROR GRID - DESCRIPTION, HEATED....8G-4
MIRROR GRID - DIAGNOSIS AND
TESTING, HEATED.....................8G-4
MIRROR GRID - OPERATION, HEATED.....8G-4
MIRROR SUPPORT BRACKET -
INSTALLATION, REARVIEW............23-126
MIRROR SWITCH - DESCRIPTION........8G-2
MIRROR SWITCH - DESCRIPTION,
POWER............................8N-13
MIRROR SWITCH - DIAGNOSIS AND
TESTING, HEATED.....................8G-3
MIRROR SWITCH - INSTALLATION,
POWER............................8N-14
MIRROR SWITCH - OPERATION..........8G-3
MIRROR SWITCH - OPERATION, POWER . . 8N-13
MIRROR SWITCH - REMOVAL, POWER . . . 8N-13
MIRROR SYSTEM - DESCRIPTION,
HEATED.............................8G-1
MIRROR SYSTEM - DIAGNOSIS AND
TESTING, HEATED.....................8G-2
MIRROR SYSTEM - OPERATION, HEATED . . 8G-2
MIRRORS - DESCRIPTION, POWER......8N-11
MIRRORS - OPERATION, POWER........8N-11
MODE - DESCRIPTION, CIRCUIT
ACTUATION TEST.....................25-2
MODE - DESCRIPTION, STATE DISPLAY
TEST...............................25-1
MODES OF OPERATION - DESCRIPTION . . . 8E-15
MODULE - DESCRIPTION, AIRBAG
CONTROL...........................8O-6
MODULE - DESCRIPTION, CENTRAL
TIMER..............................8E-1
MODULE - DESCRIPTION, DAYTIME
RUNNING LAMP......................8L-9
MODULE - DESCRIPTION, FUEL PUMP....14-12
MODULE - DESCRIPTION, FUEL TANK....14-82
MODULE - DESCRIPTION, HEATED SEAT . . 8E-20
MODULE - DESCRIPTION, WIPER
.......8R-13
MODULE - DIAGNOSIS AND TESTING,
CENTRAL TIMER
......................8E-4
MODULE - DIAGNOSIS AND TESTING,
HEATED SEAT
.......................8E-21
MODULE - INSTALLATION, AIRBAG
CONTROL
...........................8O-8
MODULE - INSTALLATION, CENTRAL
TIMER
..............................8E-6
MODULE - INSTALLATION, DAYTIME
RUNNING LAMP
......................8L-9
MODULE - INSTALLATION, ENGINE
CONTROL
..........................8E-14
MODULE - INSTALLATION, FUEL PUMP
. . . 14-13
MODULE - INSTALLATION, FUEL TANK
....14-83
MODULE - INSTALLATION, HEATED SEAT
. . 8E-23
MODULE - INSTALLATION, WIPER
.......8R-14
MODULE - OPERATION, AIRBAG
CONTROL
...........................8O-6
MODULE - OPERATION, CENTRAL TIMER
. . 8E-3MODULE - OPERATION, DAYTIME
RUNNING LAMP......................8L-9
MODULE - OPERATION, FUEL PUMP.....14-13
MODULE - OPERATION, FUEL TANK......14-82
MODULE - OPERATION, HEATED SEAT....8E-20
MODULE - OPERATION, WIPER.........8R-14
MODULE - REMOVAL, AIRBAG CONTROL . . 8O-7
MODULE - REMOVAL, CENTRAL TIMER....8E-5
MODULE - REMOVAL, DAYTIME
RUNNING LAMP......................8L-9
MODULE - REMOVAL, ENGINE CONTROL . . 8E-14
MODULE - REMOVAL, FUEL PUMP.......14-13
MODULE - REMOVAL, FUEL TANK.......14-83
MODULE - REMOVAL, HEATED SEAT.....8E-23
MODULE - REMOVAL, WIPER...........8R-14
MOLDING - INSTALLATION, ROOF JOINT . . 23-91
MOLDING - REMOVAL, ROOF JOINT......23-91
MOLDINGS - INSTALLATION, BODY SIDE . . 23-87
MOLDINGS - REMOVAL, BODY SIDE.....23-86
MONITORED SYSTEMS - DESCRIPTION . . . 25-17
MONITORS - DIESEL ENGINES -
DESCRIPTION, COMPONENT............25-20
MONITORS - GAS ENGINES -
DESCRIPTION, COMPONENT............25-19
MOTOR - ASSEMBLY, AXLE VACUUM......3-34
MOTOR - DESCRIPTION, AXLE VACUUM . . . 3-31
MOTOR - DESCRIPTION, BLOWER.......24-31
MOTOR - DESCRIPTION, IDLE AIR
CONTROL..........................14-40
MOTOR - DESCRIPTION, LUMBAR.......8N-19
MOTOR - DESCRIPTION, POWER LOCK....8N-7
MOTOR - DESCRIPTION, STARTER.......8F-37
MOTOR - DESCRIPTION, WINDOW......8N-26
MOTOR - DIAGNOSIS AND TESTING,
BLOWER...........................24-32
MOTOR - DIAGNOSIS AND TESTING,
LUMBAR...........................8N-19
MOTOR - DIAGNOSIS AND TESTING,
POWER LOCK........................8N-7
MOTOR - DIAGNOSIS AND TESTING,
STARTER ...........................8F-38
MOTOR - DIAGNOSIS AND TESTING,
VACUUM............................3-32
MOTOR - DIAGNOSIS AND TESTING,
WINDOW...........................8N-26
MOTOR - DISASSEMBLY, AXLE VACUUM . . . 3-34
MOTOR - INSTALLATION, AXLE VACUUM . . . 3-34
MOTOR - INSTALLATION, BLOWER......24-32
MOTOR - INSTALLATION, STARTER......8F-40
MOTOR - OPERATION, AXLE VACUUM.....3-31
MOTOR - OPERATION, BLOWER.........24-31
MOTOR - OPERATION, IDLE AIR
CONTROL..........................14-40
MOTOR - OPERATION, LUMBAR........8N-19
MOTOR - OPERATION, POWER LOCK.....8N-7
MOTOR - OPERATION, STARTER.........8F-37
MOTOR - REMOVAL, AXLE VACUUM......3-34
MOTOR - REMOVAL, BLOWER..........24-32
MOTOR - REMOVAL, STARTER..........8F-38
MOTOR - REMOVAL, WINDOW..........8N-26
MOTOR RELAY - DESCRIPTION,
BLOWER...........................24-22
MOTOR RELAY - DESCRIPTION,
STARTER ...........................8F-41
MOTOR RELAY - DIAGNOSIS AND
TESTING, BLOWER...................24-22
MOTOR RELAY - INSTALLATION,
BLOWER...........................24-23
MOTOR RELAY - INSTALLATION,
STARTER ...........................8F-42
MOTOR RELAY - OPERATION, BLOWER . . . 24-22
MOTOR RELAY - OPERATION, STARTER . . . 8F-41
MOTOR RELAY - REMOVAL, BLOWER....24-23
MOTOR RELAY - REMOVAL, STARTER....8F-42
MOTOR RESISTOR BLOCK -
DESCRIPTION, BLOWER...............24-23
MOTOR RESISTOR BLOCK - DIAGNOSIS
AND TESTING, BLOWER...............24-23
MOTOR RESISTOR BLOCK -
INSTALLATION, BLOWER
..............24-24
MOTOR RESISTOR BLOCK - OPERATION,
BLOWER
...........................24-23
MOTOR RESISTOR BLOCK - REMOVAL,
BLOWER
...........................24-24
MOTOR SWITCH - DESCRIPTION,
BLOWER
...........................24-24
MOTOR SWITCH - DIAGNOSIS AND
TESTING, BLOWER
...................24-25MOTOR SWITCH - OPERATION, BLOWER . . 24-24
MOTOR SWITCH - REMOVAL, BLOWER . . . 24-25
MOUNT - INSTALLATION, FRONT....9-174,9-42,
9-98
MOUNT - INSTALLATION, REAR . 9-174,9-42,9-98
MOUNT - REMOVAL, FRONT....9-173,9-41,9-97
MOUNT - REMOVAL, REAR.....9-174,9-42,9-98
MOUNTED - INSTALLATION, SIDE VIEW
MIRROR - LOW......................23-98
MOUNTED - REMOVAL, SIDE VIEW
MIRROR - LOW......................23-98
MOUNTED STOP LAMP - INSTALLATION,
CENTER HIGH........................8L-6
MOUNTED STOP LAMP - REMOVAL,
CENTER HIGH........................8L-6
MOUNTED STOP LAMP UNIT -
INSTALLATION, CENTER HIGH...........8L-6
MOUNTED STOP LAMP UNIT -
REMOVAL, CENTER HIGH...............8L-6
MOUNTING - STANDARD PROCEDURE,
MATCH .............................22-3
MUFFLER - 3.9L/5.2L/5.9L/8.0L -
INSTALLATION.......................11-10
MUFFLER - 3.9L/5.2L/5.9L/8.0L -
REMOVAL..........................11-10
MUFFLER - 5.9L DIESEL - INSTALLATION . 11-11
MUFFLER - 5.9L DIESEL - REMOVAL.....11-11
MULTI-FUNCTION SWITCH -
DESCRIPTION.......................8L-23
MULTI-FUNCTION SWITCH - DIAGNOSIS
AND TESTING.......................8L-25
MULTI-FUNCTION SWITCH -
INSTALLATION.......................8L-28
MULTI-FUNCTION SWITCH - OPERATION . . 8L-24
MULTI-FUNCTION SWITCH - REMOVAL . . . 8L-27
NAME PLATES - INSTALLATION,
EXTERIOR..........................23-89
NAME PLATES - REMOVAL, EXTERIOR....23-89
NECK SEAL - DIAGNOSIS AND TESTING,
RADIATOR CAP-TO-FILLER..............7-65
NEGATIVE CABLE INSTALLATION,
GASOLINE ENGINE...................8F-22
NEGATIVE CABLE REMOVAL, GASOLINE
ENGINE............................8F-22
NIGHT MIRROR - DESCRIPTION,
AUTOMATIC DAY.....................8N-11
NIGHT MIRROR - INSTALLATION,
AUTOMATIC DAY.....................8N-13
NIGHT MIRROR - OPERATION,
AUTOMATIC DAY.....................8N-12
NIGHT MIRROR - REMOVAL,
AUTOMATIC DAY.....................8N-13
NOISE - DIAGNOSIS AND TESTING,
WIND...............................23-3
NOISE OR VIBRATION - DIAGNOSIS AND
TESTING, TIRE.......................22-9
NOISE SUPPRESSION COMPONENTS -
DESCRIPTION, RADIO.................8A-12
NOISE SUPPRESSION COMPONENTS -
DIAGNOSIS AND TESTING, RADIO.......8A-12
NON-DEPLOYED AIRBAGS - STANDARD
PROCEDURE, HANDLING...............8O-4
NON-MONITORED CIRCUITS - DIESEL -
OPERATION.........................25-24
NON-MONITORED CIRCUITS - GAS
ENGINES - OPERATION................25-24
NOZZLE - DESCRIPTION, WASHER.......8R-9
NOZZLE - INSTALLATION, WASHER.......8R-9
NOZZLE - OPERATION, WASHER.........8R-9
NOZZLE - REMOVAL, WASHER...........8R-9
NUMBER - DESCRIPTION, VEHICLE
IDENTIFICATION....................Intro.-1
NV241 - DESCRIPTION, TRANSFER CASE . . . 0-5
NV241HD - ASSEMBLY, TRANSFER CASE . 21-480
NV241HD - CLEANING, TRANSFER CASE . 21-476
NV241HD - DESCRIPTION, TRANSFER
CASE.............................21-465
NV241HD - DISASSEMBLY, TRANSFER
CASE.............................21-469
NV241HD - INSPECTION, TRANSFER
CASE.............................21-476
NV241HD - INSTALLATION, TRANSFER
CASE
.............................21-494
NV241HD - OPERATION, TRANSFER
CASE
.............................21-467
NV241HD - REMOVAL, TRANSFER CASE
. 21-469
NV241HD - TRANSFER CASE
..........21-495
NV241LD - ASSEMBLY, TRANSFER CASE
. 21-445
20 INDEXBR/BE
Description Group-Page Description Group-Page Description Group-Page

PRESSURE SWITCH - OPERATION, A/C
HIGH..............................24-20
PRESSURE SWITCH - OPERATION, A/C
LOW ..............................24-21
PRESSURE SWITCH - REMOVAL, A/C
HIGH..............................24-20
PRESSURE SWITCH - REMOVAL, A/C
LOW ..............................24-21
PRESSURE TEST - DIAGNOSIS AND
TESTING, FUEL PUMP..................14-9
PRESSURE TEST - DIAGNOSIS AND
TESTING, HYDRAULIC...........21-270,21-98
PRESSURES - DESCRIPTION, TIRE
INFLATION...........................22-7
PRESSURES, DIESEL ENGINES - FUEL
SYSTEM............................14-62
PROGRAMMING - STANDARD
PROCEDURE, RKE TRANSMITTER........8N-8
PROPELLER SHAFT - DIAGNOSIS AND
TESTING.............................3-1
PROPELLER SHAFT - FRONT -
INSTALLATION.........................3-7
PROPELLER SHAFT - FRONT - REMOVAL . . . 3-6
PROPELLER SHAFT - REAR -
INSTALLATION.........................3-7
PROPELLER SHAFT - REAR - REMOVAL....3-7
PROPELLER SHAFT - STANDARD
PROCEDURES.........................3-3
PROPELLER SHAFT, SPECIAL TOOLS.......3-6
PROPELLER SHAFT, SPECIFICATIONS.......3-6
PTO SWITCH - DESCRIPTION...........14-47
PTO SWITCH - OPERATION..............14-47
PULLEY - INSTALLATION..............19-39
PULLEY - REMOVAL..................19-38
PUMP - 5.9L - CLEANING, WATER........7-68
PUMP - 5.9L - DESCRIPTION, WATER.....7-66
PUMP - 5.9L - INSPECTION, WATER......7-68
PUMP - 5.9L - INSTALLATION, WATER.....7-68
PUMP - 5.9L - OPERATION, WATER.......7-66
PUMP - 5.9L - REMOVAL, WATER........7-66
PUMP - 5.9L DIESEL - CLEANING,
WATER .............................7-72
PUMP - 5.9L DIESEL - DESCRIPTION,
VACUUM............................7-33
PUMP - 5.9L DIESEL - DESCRIPTION,
WATER .............................7-72
PUMP - 5.9L DIESEL - INSPECTION,
WATER .............................7-72
PUMP - 5.9L DIESEL - INSTALLATION,
VACUUM............................7-36
PUMP - 5.9L DIESEL - INSTALLATION,
WATER .............................7-72
PUMP - 5.9L DIESEL - OPERATION,
VACUUM............................7-34
PUMP - 5.9L DIESEL - OPERATION,
WATER .............................7-72
PUMP - 5.9L DIESEL - REMOVAL,
VACUUM............................7-34
PUMP - 5.9L DIESEL - REMOVAL,
WATER .............................7-72
PUMP - 8.0L - CLEANING, WATER........7-71
PUMP - 8.0L - INSPECTION, WATER......7-71
PUMP - 8.0L - INSTALLATION, WATER.....7-71
PUMP - 8.0L - REMOVAL, WATER........7-69
PUMP - ASSEMBLY, OIL................9-49
PUMP - ASSEMBLY, OIL........21-169,21-340
PUMP - CLEANING, OIL..........9-104,9-181
PUMP - CLEANING, OIL........21-168,21-338
PUMP - DESCRIPTION................19-33
PUMP - DESCRIPTION, AIR INJECTION . . . 25-29
PUMP - DESCRIPTION, FUEL
............14-9
PUMP - DESCRIPTION, FUEL TRANSFER
. . 14-83
PUMP - DESCRIPTION, LEAK DETECTION
. 25-34
PUMP - DESCRIPTION, OIL
......21-166,21-336
PUMP - DIAGNOSIS AND TESTING, AIR
INJECTION
..........................25-29
PUMP - DIAGNOSIS AND TESTING,
WATER
.....................7-66,7-69,7-72
PUMP - DISASSEMBLY, OIL
.............9-47
PUMP - DISASSEMBLY, OIL
.....21-167,21-337
PUMP - INITIAL OPERATION -
STANDARD PROCEDURE, POWER
STEERING
..........................19-33
PUMP - INSPECTION, OIL
.....9-104,9-181,9-47
PUMP - INSPECTION, OIL
.......21-168,21-339
PUMP - INSTALLATION, AIR INJECTION
. . . 25-30
PUMP - INSTALLATION, FUEL TRANSFER
. 14-87PUMP - INSTALLATION, LEAK
DETECTION.........................25-34
PUMP - INSTALLATION, OIL . . . 9-106,9-182,9-50
PUMP - OPERATION..................19-33
PUMP - OPERATION, AIR INJECTION.....25-29
PUMP - OPERATION, FUEL..............14-9
PUMP - OPERATION, FUEL TRANSFER....14-83
PUMP - OPERATION, LEAK DETECTION . . . 25-34
PUMP - OPERATION, OIL.......21-166,21-336
PUMP - REMOVAL, AIR INJECTION......25-30
PUMP - REMOVAL, FUEL TRANSFER.....14-86
PUMP - REMOVAL, LEAK DETECTION....25-34
PUMP - REMOVAL, OIL.......9-104,9-181,9-47
PUMP 235 H.P. - DESCRIPTION, FUEL....14-69
PUMP 245 H.P. - DESCRIPTION, FUEL....14-69
PUMP AMPERAGE TEST - DIAGNOSIS
AND TESTING, FUEL..................14-10
PUMP BYPASS HOSE WITH AIR
CONDITIONING - INSTALLATION,
WATER .............................7-76
PUMP BYPASS HOSE WITH AIR
CONDITIONING - REMOVAL, WATER......7-73
PUMP BYPASS HOSE WITHOUT AIR
CONDITIONING - INSTALLATION,
WATER .............................7-77
PUMP BYPASS HOSE WITHOUT AIR
CONDITIONING - REMOVAL, WATER......7-76
PUMP CAPACITY TEST - DIAGNOSIS
AND TESTING, FUEL...................14-9
PUMP DATA PLATE, SPECIFICATIONS -
FUEL INJECTION.....................14-77
PUMP FILTER - INSTALLATION, AIR......25-30
PUMP FILTER - REMOVAL, AIR.........25-30
PUMP LEAKAGE - DIAGNOSIS AND
TESTING...........................19-33
PUMP MODULE - DESCRIPTION, FUEL....14-12
PUMP MODULE - INSTALLATION, FUEL . . . 14-13
PUMP MODULE - OPERATION, FUEL.....14-13
PUMP MODULE - REMOVAL, FUEL.......14-13
PUMP OUTPUT - DIAGNOSIS AND
TESTING, VACUUM....................7-34
PUMP PRESSURE - DIAGNOSIS AND
TESTING, FUEL TRANSFER.............14-84
PUMP PRESSURE TEST - DIAGNOSIS
AND TESTING, FUEL...................14-9
PUMP RELAY - DESCRIPTION, FUEL.....14-40
PUMP RELAY - DESCRIPTION, FUEL
INJECTION.........................14-103
PUMP RELAY - INSTALLATION, FUEL.....14-40
PUMP RELAY - OPERATION, FUEL.......14-40
PUMP RELAY - OPERATION, FUEL
INJECTION.........................14-103
PUMP RELAY - REMOVAL, FUEL........14-40
PUMP RELAYS - DIAGNOSIS AND
TESTING, ASD AND FUEL...............8I-4
PUMP, SPECIAL TOOLS - POWER
STEERING..........................19-38
PUMP TIMING - DIAGNOSIS AND
TESTING, FUEL INJECTION.............14-70
PUMP VOLUME CHECK - STANDARD
PROCEDURE, OIL.............21-166,21-336
PUMP/MOTOR - DESCRIPTION, WASHER . . 8R-9
PUMP/MOTOR - INSTALLATION,
WASHER...........................8R-10
PUMP/MOTOR - OPERATION, WASHER....8R-9
PUMP/MOTOR - REMOVAL, WASHER....8R-10
PUSHRODS - CLEANING...............9-134
PUSHRODS - INSPECTION.............9-135
QUARTER TRIM PANEL - INSTALLATION . 23-128
QUARTER TRIM PANEL - REMOVAL.....23-128
QUARTER WINDOW - INSTALLATION....23-150
QUARTER WINDOW - REMOVAL
........23-150
QUICK CONNECT FITTING -
DESCRIPTION
.......................14-24
QUICK-CONNECT FITTINGS - STANDARD
PROCEDURE
........................14-24
RADIAL-PLY TIRES - DESCRIPTION
.......22-6
RADIATOR - 5.9L - CLEANING
...........7-59
RADIATOR - 5.9L - DESCRIPTION
........7-58
RADIATOR - 5.9L - INSPECTION
..........7-60
RADIATOR - 5.9L - INSTALLATION
........7-60
RADIATOR - 5.9L - OPERATION
..........7-58
RADIATOR - 5.9L - REMOVAL
............7-58
RADIATOR - 5.9L DIESEL - CLEANING
.....7-64
RADIATOR - 5.9L DIESEL -
DESCRIPTION
........................7-62
RADIATOR - 5.9L DIESEL - INSPECTION
. . . 7-64RADIATOR - 5.9L DIESEL -
INSTALLATION........................7-64
RADIATOR - 5.9L DIESEL - OPERATION....7-62
RADIATOR - 5.9L DIESEL - REMOVAL.....7-62
RADIATOR - 8.0L - CLEANING...........7-61
RADIATOR - 8.0L - DESCRIPTION........7-60
RADIATOR - 8.0L - INSPECTION..........7-61
RADIATOR - 8.0L - INSTALLATION........7-61
RADIATOR - 8.0L - OPERATION..........7-60
RADIATOR - 8.0L - REMOVAL............7-60
RADIATOR CAP - DIAGNOSIS AND
TESTING............................7-65
RADIATOR CAP-TO-FILLER NECK SEAL -
DIAGNOSIS AND TESTING..............7-65
RADIATOR COOLANT FLOW -
DIAGNOSIS AND TESTING......7-58,7-60,7-62
RADIATOR FAN - 5.9L DIESEL -
CLEANING...........................7-43
RADIATOR FAN - 5.9L DIESEL -
INSPECTION.........................7-43
RADIATOR FAN - 5.9L DIESEL -
INSTALLATION........................7-44
RADIATOR FAN - 5.9L DIESEL -
REMOVAL...........................7-43
RADIATOR FAN - 5.9L/8.0L - CLEANING....7-42
RADIATOR FAN - 5.9L/8.0L -
INSPECTION.........................7-42
RADIATOR FAN - 5.9L/8.0L -
INSTALLATION........................7-42
RADIATOR FAN - 5.9L/8.0L - REMOVAL....7-41
RADIATOR PRESSURE CAP -
DESCRIPTION........................7-64
RADIATOR PRESSURE CAP - OPERATION . . 7-64
RADIO - DESCRIPTION................8A-10
RADIO - DIAGNOSIS AND TESTING......8A-10
RADIO - INSTALLATION...............8A-11
RADIO - OPERATION..................8A-10
RADIO - REMOVAL...................8A-11
RADIO CHOKE RELAY - DESCRIPTION.....8A-7
RADIO CHOKE RELAY - DIAGNOSIS AND
TESTING............................8A-8
RADIO CHOKE RELAY - INSTALLATION....8A-9
RADIO CHOKE RELAY - OPERATION.......8A-8
RADIO CHOKE RELAY - REMOVAL........8A-8
RADIO NOISE SUPPRESSION
COMPONENTS - DESCRIPTION..........8A-12
RADIO NOISE SUPPRESSION
COMPONENTS - DIAGNOSIS AND
TESTING...........................8A-12
RATINGS, SPECIFICATIONS -
GENERATOR........................8F-26
RBI - REAR AXLE, 286................3-120
RE TRANSMISSION, SPECIAL TOOLS . . . 21-146,
21-316
READING LAMP - DESCRIPTION.........8L-36
READING LAMP - INSTALLATION........8L-37
READING LAMP - OPERATION..........8L-36
READING LAMP - REMOVAL............8L-36
REAR - DESCRIPTION..................2-25
REAR - DESCRIPTION, CRANKSHAFT OIL
SEAL...............................9-33
REAR - INSTALLATION.........5-14,5-22,5-25
REAR - INSTALLATION................22-12
REAR - INSTALLATION, CRANKSHAFT
OIL SEAL...................9-162,9-34,9-90
REAR - INSTALLATION, PROPELLER
SHAFT...............................3-7
REAR - OPERATION, CRANKSHAFT OIL
SEAL...............................9-33
REAR - REMOVAL.............5-10,5-21,5-23
REAR - REMOVAL, CRANKSHAFT OIL
SEAL......................9-161,9-33,9-90
REAR - REMOVAL, PROPELLER SHAFT.....3-7
REAR AXLE - 248RBI - ADJUSTMENTS....3-51
REAR AXLE - 248RBI - DESCRIPTION.....3-46
REAR AXLE - 248RBI - INSTALLATION.....3-51
REAR AXLE - 248RBI - OPERATION.......3-46
REAR AXLE - 248RBI - REMOVAL........3-51
REAR AXLE - 267RBI - ADJUSTMENTS....3-83
REAR AXLE - 267RBI - DESCRIPTION.....3-78
REAR AXLE - 267RBI - INSTALLATION.....3-82
REAR AXLE - 267RBI - OPERATION.......3-78
REAR AXLE - 267RBI - REMOVAL........3-82
REAR AXLE - 286RBI - ADJUSTMENTS
. . . 3-112
REAR AXLE - 286RBI - DESCRIPTION
....3-107
REAR AXLE - 286RBI - INSTALLATION
....3-112
REAR AXLE - 286RBI - OPERATION
......3-108
REAR AXLE - 286RBI - REMOVAL
.......3-112
24 INDEXBR/BE
Description Group-Page Description Group-Page Description Group-Page

REAR AXLE, 248RBI...................3-59
REAR AXLE, 267RBI...................3-91
REAR AXLE, 286 RBI.................3-120
REAR AXLE, 286RBI..................3-120
REAR BEARING - INSTALLATION,
OUTPUT SHAFT...............21-172,21-343
REAR BEARING - REMOVAL, OUTPUT
SHAFT......................21-171,21-343
REAR BUMPER - INSTALLATION..........13-6
REAR BUMPER - REMOVAL.............13-6
REAR CAB SIDE PANEL SPEAKER -
INSTALLATION.......................8A-20
REAR CAB SIDE PANEL SPEAKER -
REMOVAL..........................8A-20
REAR CLOSURE PANEL TRIM -
INSTALLATION......................23-121
REAR CLOSURE PANEL TRIM -
REMOVAL.........................23-120
REAR CLUTCH - ASSEMBLY.....21-205,21-377
REAR CLUTCH - CLEANING.....21-204,21-377
REAR CLUTCH - DESCRIPTION . . . 21-203,21-375
REAR CLUTCH - DISASSEMBLY . . 21-204,21-376
REAR CLUTCH - INSPECTION....21-204,21-377
REAR CLUTCH - OPERATION....21-203,21-375
REAR DOOR SPEAKER - INSTALLATION . . . 8A-21
REAR DOOR SPEAKER - REMOVAL......8A-20
REAR FENDER - INSTALLATION.........23-95
REAR FENDER - REMOVAL.............23-95
REAR FLOOR STOWAGE TRAY -
INSTALLATION......................23-121
REAR FLOOR STOWAGE TRAY -
REMOVAL.........................23-121
REAR MOUNT - INSTALLATION . 9-174,9-42,9-98
REAR MOUNT - REMOVAL.....9-174,9-42,9-98
REAR OIL SEAL RETAINER -
INSTALLATION, CRANKSHAFT.......9-163,9-90
REAR OIL SEAL RETAINER - REMOVAL,
CRANKSHAFT...................9-162,9-90
REAR PARK BRAKE CABLE -
INSTALLATION........................5-30
REAR PARK BRAKE CABLE - REMOVAL....5-29
REAR SEAT - INSTALLATION...........23-144
REAR SEAT - REMOVAL..............23-144
REAR SEAT BELT & RETRACTOR -
INSTALLATION......................8O-26
REAR SEAT BELT & RETRACTOR -
REMOVAL..........................8O-26
REAR SEAT BELT BUCKLE -
INSTALLATION......................8O-27
REAR SEAT BELT BUCKLE - REMOVAL . . . 8O-27
REAR SERVO - ASSEMBLY......21-207,21-379
REAR SERVO - CLEANING......21-207,21-379
REAR SERVO - DESCRIPTION....21-207,21-378
REAR SERVO - DISASSEMBLY . . . 21-207,21-378
REAR SERVO - OPERATION
.....21-207,21-378
REAR SPLASH SHIELD - INSTALLATION
. . 23-96
REAR SPLASH SHIELD - REMOVAL
......23-96
REAR VIEW MIRROR - REMOVAL
.......23-126
REAR WHEEL INSTALLATION -
STANDARD PROCEDURE, DUAL
.........22-11
REAR WHEEL SPEED SENSOR -
DIAGNOSIS AND TESTING
..............5-40
REAR WHEEL SPEED SENSOR -
INSTALLATION
........................5-40
REAR WHEEL SPEED SENSOR -
REMOVAL
...........................5-40
REAR WHEELHOUSE LINER -
INSTALLATION
.......................23-96
REAR WHEELHOUSE LINER - REMOVAL
. . 23-96
REARVIEW MIRROR SUPPORT BRACKET
- INSTALLATION
....................23-126
RECEIVER - INSTALLATION, ASH
.......23-107
RECEIVER - REMOVAL, ASH
...........23-107
RECIRCULATION DOOR - INSTALLATION
. . 24-39
RECIRCULATION DOOR - REMOVAL
......24-38
RECIRCULATION DOOR ACTUATOR -
INSTALLATION
.......................24-28
RECIRCULATION DOOR ACTUATOR -
REMOVAL
..........................24-27
RECLINER - INSTALLATION, SEAT BACK
. 23-138
RECLINER - REMOVAL, SEAT BACK
.....23-138
RECOVERY - STANDARD PROCEDURE,
REFRIGERANT
.......................24-45
RECOVERY CONTAINER - 3.9L/5.2L/5.9L/
5.9L DIESEL - DESCRIPTION,
COOLANT
............................7-40RECOVERY CONTAINER - 3.9L/5.2L/5.9L/
5.9L DIESEL - INSTALLATION,
COOLANT............................7-41
RECOVERY CONTAINER - 3.9L/5.2L/5.9L/
5.9L DIESEL - OPERATION, COOLANT.....7-40
RECOVERY CONTAINER - 3.9L/5.2L/5.9L/
5.9L DIESEL - REMOVAL, COOLANT.......7-40
RECOVERY CONTAINER - 8.0L -
DESCRIPTION, COOLANT...............7-41
RECOVERY CONTAINER - 8.0L -
OPERATION, COOLANT.................7-41
REFACING - STANDARD PROCEDURE,
CYLINDER BLOCK....................9-148
REFERENCES - DESCRIPTION, TORQUE . Intro.-11
REFILL - STANDARD PROCEDURE, FLUID
DRAIN............................21-460
REFILLING COOLING SYSTEM 5.9L
DIESEL ENGINE - STANDARD
PROCEDURE.........................7-16
REFILLING COOLING SYSTEM 5.9L/8.0L
ENGINES - STANDARD PROCEDURE......7-16
REFRIGERANT - DESCRIPTION..........24-56
REFRIGERANT - OPERATION............24-57
REFRIGERANT HOSES/LINES/TUBES
PRECAUTIONS - CAUTION.............24-43
REFRIGERANT LINES - DESCRIPTION....24-40
REFRIGERANT LINES - OPERATION......24-41
REFRIGERANT OIL - DESCRIPTION......24-57
REFRIGERANT OIL - OPERATION........24-57
REFRIGERANT OIL LEVEL - STANDARD
PROCEDURE........................24-57
REFRIGERANT RECOVERY - STANDARD
PROCEDURE........................24-45
REFRIGERANT SYSTEM CHARGE -
STANDARD PROCEDURE...............24-46
REFRIGERANT SYSTEM EVACUATE -
STANDARD PROCEDURE...............24-46
REFRIGERANT SYSTEM LEAKS -
DIAGNOSIS AND TESTING.............24-43
REFRIGERANT SYSTEM SERVICE
EQUIPMENT - STANDARD PROCEDURE . . . 24-45
REFRIGERANT SYSTEM SERVICE PORT -
DESCRIPTION........................24-1
REFRIGERANT SYSTEM SERVICE PORT -
OPERATION..........................24-2
REGULATOR - DESCRIPTION, FUEL
FILTER/PRESSURE.....................14-5
REGULATOR - DESCRIPTION, VOLTAGE . . . 8F-30
REGULATOR - INSTALLATION, FUEL
FILTER/PRESSURE.....................14-7
REGULATOR - INSTALLATION, WINDOW . . 23-76
REGULATOR - OPERATION, FUEL
FILTER/PRESSURE.....................14-5
REGULATOR - OPERATION, VOLTAGE.....8F-30
REGULATOR - REMOVAL, FUEL
FILTER/PRESSURE.....................14-5
REGULATOR - REMOVAL, WINDOW......23-76
RELAY - DESCRIPTION.............8W-97-14
RELAY - DESCRIPTION, A/C
COMPRESSOR CLUTCH...............24-17
RELAY - DESCRIPTION, BLOWER
MOTOR............................24-22
RELAY - DESCRIPTION, FUEL HEATER....14-67
RELAY - DESCRIPTION, FUEL INJECTION
PUMP............................14-103
RELAY - DESCRIPTION, FUEL PUMP.....14-40
RELAY - DESCRIPTION, HEADLAMP . . . 8W-97-13
RELAY - DESCRIPTION, HEADLAMP......8L-17
RELAY - DESCRIPTION, HEATED SEAT....8G-14
RELAY - DESCRIPTION, HORN.......8W-97-12
RELAY - DESCRIPTION, HORN...........8H-3
RELAY - DESCRIPTION, INTAKE AIR
HEATER ...........................14-105
RELAY - DESCRIPTION, RADIO CHOKE....8A-7
RELAY - DESCRIPTION, STARTER
MOTOR............................8F-41
RELAY - DESCRIPTION, WIPER.........8R-15
RELAY - DIAGNOSIS AND TESTING . . . 8W-97-15
RELAY - DIAGNOSIS AND TESTING, A/C
COMPRESSOR CLUTCH
...............24-17
RELAY - DIAGNOSIS AND TESTING,
BLOWER MOTOR
....................24-22
RELAY - DIAGNOSIS AND TESTING,
FUEL HEATER
.......................14-68
RELAY - DIAGNOSIS AND TESTING,
HEADLAMP
.........................8L-17
RELAY - DIAGNOSIS AND TESTING,
HEATED SEAT
.......................8G-15RELAY - DIAGNOSIS AND TESTING,
HORN..........................8W-97-12
RELAY - DIAGNOSIS AND TESTING,
HORN..............................8H-3
RELAY - DIAGNOSIS AND TESTING,
RADIO CHOKE........................8A-8
RELAY - DIAGNOSIS AND TESTING,
STARTER ...........................8F-41
RELAY - DIAGNOSIS AND TESTING,
WIPER.............................8R-16
RELAY - INSTALLATION............8W-97-15
RELAY - INSTALLATION, A/C
COMPRESSOR CLUTCH...............24-18
RELAY - INSTALLATION, BLOWER
MOTOR............................24-23
RELAY - INSTALLATION, FUEL HEATER . . . 14-69
RELAY - INSTALLATION, FUEL PUMP.....14-40
RELAY - INSTALLATION, HEADLAMP . . 8W-97-13
RELAY - INSTALLATION, HEADLAMP.....8L-18
RELAY - INSTALLATION, HEATED SEAT . . . 8G-16
RELAY - INSTALLATION, HORN......8W-97-12
RELAY - INSTALLATION, HORN..........8H-4
RELAY - INSTALLATION, INTAKE AIR
HEATER ...........................14-106
RELAY - INSTALLATION, RADIO CHOKE....8A-9
RELAY - INSTALLATION, STARTER
MOTOR............................8F-42
RELAY - INSTALLATION, WIPER.........8R-17
RELAY - OPERATION...............8W-97-14
RELAY - OPERATION, A/C COMPRESSOR
CLUTCH............................24-17
RELAY - OPERATION, BLOWER MOTOR . . . 24-22
RELAY - OPERATION, FUEL HEATER......14-67
RELAY - OPERATION, FUEL INJECTION
PUMP............................14-103
RELAY - OPERATION, FUEL PUMP.......14-40
RELAY - OPERATION, HEADLAMP........8L-17
RELAY - OPERATION, HEATED SEAT.....8G-15
RELAY - OPERATION, HORN.............8H-3
RELAY - OPERATION, INTAKE AIR
HEATER ...........................14-105
RELAY - OPERATION, RADIO CHOKE......8A-8
RELAY - OPERATION, STARTER MOTOR . . . 8F-41
RELAY - OPERATION, WIPER...........8R-15
RELAY - REMOVAL................8W-97-15
RELAY - REMOVAL, A/C COMPRESSOR
CLUTCH............................24-18
RELAY - REMOVAL, BLOWER MOTOR....24-23
RELAY - REMOVAL, FUEL HEATER.......14-69
RELAY - REMOVAL, FUEL PUMP........14-40
RELAY - REMOVAL, HEADLAMP......8W-97-13
RELAY - REMOVAL, HEADLAMP.........8L-18
RELAY - REMOVAL, HEATED SEAT.......8G-16
RELAY - REMOVAL, HORN..........8W-97-12
RELAY - REMOVAL, HORN..............8H-4
RELAY - REMOVAL, INTAKE AIR HEATER . 14-106
RELAY - REMOVAL, RADIO CHOKE.......8A-8
RELAY - REMOVAL, STARTER MOTOR....8F-42
RELAY - REMOVAL, WIPER............8R-17
RELAYS - DIAGNOSIS AND TESTING,
ASD AND FUEL PUMP..................8I-4
RELEASE - STANDARD PROCEDURE,
FUEL SYSTEM PRESSURE..............14-3
RELEASE BEARING - INSTALLATION,
CLUTCH.............................6-12
RELEASE BEARING - REMOVAL, CLUTCH . . . 6-12
RELEASE CABLE - INSTALLATION........23-82
RELEASE CABLE - INSTALLATION, LATCH . 23-103
RELEASE CABLE - REMOVAL...........23-82
RELEASE CABLE - REMOVAL, LATCH....23-103
RELEASE HANDLE - INSTALLATION.......5-32
RELEASE HANDLE - REMOVAL...........5-31
RELIEF VALVE - CLEANING, OIL
PRESSURE.........................9-180
RELIEF VALVE - DESCRIPTION, HIGH
PRESSURE.........................24-46
RELIEF VALVE - INSPECTION, OIL
PRESSURE.........................9-180
RELIEF VALVE - INSTALLATION, OIL
PRESSURE
.........................9-180
RELIEF VALVE - OPERATION, HIGH
PRESSURE
.........................24-47
RELIEF VALVE - REMOVAL, OIL
PRESSURE
.........................9-180
REMINDER INDICATOR - DESCRIPTION,
SERVICE
...........................8J-27
REMINDER INDICATOR - OPERATION,
SERVICE
...........................8J-28
BR/BEINDEX 25
Description Group-Page Description Group-Page Description Group-Page

SUPPLY RESTRICTIONS - DIAGNOSIS
AND TESTING, FUEL..................14-60
SUPPLY TEST - DIAGNOSIS AND
TESTING, VACUUM....................8P-3
SUPPORT - INSTALLATION, LUMBAR....23-133
SUPPORT - REMOVAL, LUMBAR.......23-132
SUPPORT BRACKET - INSTALLATION,
REARVIEW MIRROR.................23-126
SUPPRESSION COMPONENTS -
DESCRIPTION, RADIO NOISE...........8A-12
SUPPRESSION COMPONENTS -
DIAGNOSIS AND TESTING, RADIO
NOISE.............................8A-12
SUSPENSION - STANDARD PROCEDURE,
ALIGNMENT LINK/COIL..................2-5
SUSPENSION, SPECIAL TOOLS -
INDEPENDENT FRONT...................2-9
SUSPENSION, SPECIAL TOOLS -
LINK/COIL...........................2-16
SUSPENSION-REAR, SPECIAL TOOLS.....2-27
SWITCH - DESCRIPTION...............8P-12
SWITCH - DESCRIPTION, A/C HIGH
PRESSURE.........................24-20
SWITCH - DESCRIPTION, A/C LOW
PRESSURE.........................24-21
SWITCH - DESCRIPTION, BLOWER
MOTOR............................24-24
SWITCH - DESCRIPTION, BRAKE LAMP....8L-4
SWITCH - DESCRIPTION, CLUTCH
PEDAL POSITION.....................6-17
SWITCH - DESCRIPTION, DOOR AJAR....8L-34
SWITCH - DESCRIPTION, DOOR
CYLINDER LOCK......................8N-5
SWITCH - DESCRIPTION, DRIVER
POWER SEAT.......................8N-17
SWITCH - DESCRIPTION, DRIVER SEAT
HEATER.............................8G-7
SWITCH - DESCRIPTION, HEADLAMP....8L-18
SWITCH - DESCRIPTION, HORN..........8H-4
SWITCH - DESCRIPTION, IGNITION......19-11
SWITCH - DESCRIPTION, KEY-IN
IGNITION............................19-9
SWITCH - DESCRIPTION, LUMBAR
CONTROL..........................8N-18
SWITCH - DESCRIPTION, MIRROR........8G-2
SWITCH - DESCRIPTION, MULTI-
FUNCTION..........................8L-23
SWITCH - DESCRIPTION, OVERDRIVE . . . 21-190,
21-344
SWITCH - DESCRIPTION, PASSENGER
AIRBAG ON/OFF.....................8O-23
SWITCH - DESCRIPTION, PASSENGER
POWER SEAT.......................8N-20
SWITCH - DESCRIPTION, PASSENGER
SEAT HEATER .......................8G-16
SWITCH - DESCRIPTION, POWER LOCK . . . 8N-8
SWITCH - DESCRIPTION, POWER
MIRROR...........................8N-13
SWITCH - DESCRIPTION, POWER
WINDOW...........................8N-24
SWITCH - DESCRIPTION, PTO..........14-47
SWITCH - DESCRIPTION, SEAT BELT.....8O-28
SWITCH - DESCRIPTION, WASHER
FLUID LEVEL.........................8R-7
SWITCH - DIAGNOSIS AND TESTING,
A/C HIGH PRESSURE.................24-20
SWITCH - DIAGNOSIS AND TESTING,
A/C LOW PRESSURE..................24-21
SWITCH - DIAGNOSIS AND TESTING,
BLOWER MOTOR....................24-25
SWITCH - DIAGNOSIS AND TESTING,
BRAKE LAMP........................8L-5
SWITCH - DIAGNOSIS AND TESTING,
DOOR AJAR.........................8L-34
SWITCH - DIAGNOSIS AND TESTING,
DOOR CYLINDER LOCK................8N-6
SWITCH - DIAGNOSIS AND TESTING,
DRIVER POWER SEAT................8N-17
SWITCH - DIAGNOSIS AND TESTING,
HEADLAMP
.........................8L-19
SWITCH - DIAGNOSIS AND TESTING,
HEATED MIRROR
.....................8G-3
SWITCH - DIAGNOSIS AND TESTING,
HEATED SEAT
...................8G-17,8G-8
SWITCH - DIAGNOSIS AND TESTING,
HORN
..............................8H-5
SWITCH - DIAGNOSIS AND TESTING,
IGNITION
...........................19-11SWITCH - DIAGNOSIS AND TESTING,
MULTI-FUNCTION....................8L-25
SWITCH - DIAGNOSIS AND TESTING,
PARK/NEUTRAL POSITION......21-195,21-367
SWITCH - DIAGNOSIS AND TESTING,
PASSENGER POWER SEAT.............8N-20
SWITCH - DIAGNOSIS AND TESTING,
POWER LOCK........................8N-9
SWITCH - DIAGNOSIS AND TESTING,
POWER WINDOW....................8N-24
SWITCH - DIAGNOSIS AND TESTING,
SEAT BELT .........................8O-28
SWITCH - INSTALLATION..............8P-14
SWITCH - INSTALLATION, A/C HIGH
PRESSURE.........................24-20
SWITCH - INSTALLATION, A/C LOW
PRESSURE.........................24-21
SWITCH - INSTALLATION, BRAKE LAMP . . . 8L-6
SWITCH - INSTALLATION, DOOR AJAR . . . 8L-35
SWITCH - INSTALLATION, DOOR
CYLINDER LOCK......................8N-6
SWITCH - INSTALLATION, DRIVER
POWER SEAT.......................8N-18
SWITCH - INSTALLATION, DRIVER SEAT
HEATER............................8G-10
SWITCH - INSTALLATION, GLOVE BOX
LAMP..............................8L-36
SWITCH - INSTALLATION, HEADLAMP....8L-20
SWITCH - INSTALLATION, IGNITION......19-12
SWITCH - INSTALLATION, MULTI-
FUNCTION..........................8L-28
SWITCH - INSTALLATION, OVERDRIVE....21-191,
21-345
SWITCH - INSTALLATION, PARK/
NEUTRAL POSITION...........21-195,21-367
SWITCH - INSTALLATION, PASSENGER
AIRBAG ON/OFF.....................8O-25
SWITCH - INSTALLATION, PASSENGER
POWER SEAT.......................8N-21
SWITCH - INSTALLATION, PASSENGER
SEAT HEATER .......................8G-19
SWITCH - INSTALLATION, POWER
MIRROR...........................8N-14
SWITCH - INSTALLATION, POWER
WINDOW...........................8N-26
SWITCH - INSTALLATION, WASHER
FLUID LEVEL.........................8R-8
SWITCH - OPERATION................8P-12
SWITCH - OPERATION, A/C HIGH
PRESSURE.........................24-20
SWITCH - OPERATION, A/C LOW
PRESSURE.........................24-21
SWITCH - OPERATION, BLOWER MOTOR . . 24-24
SWITCH - OPERATION, BRAKE LAMP......8L-4
SWITCH - OPERATION, CLUTCH PEDAL
POSITION...........................6-17
SWITCH - OPERATION, DOOR CYLINDER
LOCK...............................8N-5
SWITCH - OPERATION, DRIVER POWER
SEAT ..............................8N-17
SWITCH - OPERATION, DRIVER SEAT
HEATER.............................8G-8
SWITCH - OPERATION, HEADLAMP......8L-18
SWITCH - OPERATION, HORN...........8H-5
SWITCH - OPERATION, IGNITION........19-11
SWITCH - OPERATION, LUMBAR
CONTROL..........................8N-19
SWITCH - OPERATION, MIRROR.........8G-3
SWITCH - OPERATION, MULTI-FUNCTION
. 8L-24
SWITCH - OPERATION, OVERDRIVE
....21-190,
21-344
SWITCH - OPERATION, PASSENGER
AIRBAG ON/OFF
.....................8O-24
SWITCH - OPERATION, PASSENGER
POWER SEAT
.......................8N-20
SWITCH - OPERATION, PASSENGER
SEAT HEATER
.......................8G-17
SWITCH - OPERATION, POWER LOCK
.....8N-8
SWITCH - OPERATION, POWER MIRROR
. . 8N-13
SWITCH - OPERATION, POWER WINDOW
. 8N-24
SWITCH - OPERATION, PTO
............14-47
SWITCH - OPERATION, SEAT BELT
.......8O-28
SWITCH - OPERATION, WASHER FLUID
LEVEL
..............................8R-7
SWITCH - REMOVAL
..................8P-13
SWITCH - REMOVAL, A/C HIGH
PRESSURE
.........................24-20SWITCH - REMOVAL, A/C LOW
PRESSURE.........................24-21
SWITCH - REMOVAL, BLOWER MOTOR . . . 24-25
SWITCH - REMOVAL, BRAKE LAMP.......8L-5
SWITCH - REMOVAL, DOOR AJAR.......8L-35
SWITCH - REMOVAL, DOOR CYLINDER
LOCK...............................8N-6
SWITCH - REMOVAL, DRIVER POWER
SEAT ..............................8N-18
SWITCH - REMOVAL, DRIVER SEAT
HEATER.............................8G-9
SWITCH - REMOVAL, GLOVE BOX LAMP . . 8L-35
SWITCH - REMOVAL, HEADLAMP........8L-19
SWITCH - REMOVAL, HORN.............8H-5
SWITCH - REMOVAL, IGNITION.........19-12
SWITCH - REMOVAL, LUMBAR
CONTROL..........................8N-19
SWITCH - REMOVAL, MULTI-FUNCTION . . . 8L-27
SWITCH - REMOVAL, OVERDRIVE......21-191,
21-344
SWITCH - REMOVAL, PARK/NEUTRAL
POSITION...................21-195,21-367
SWITCH - REMOVAL, PASSENGER
AIRBAG ON/OFF.....................8O-24
SWITCH - REMOVAL, PASSENGER
POWER SEAT.......................8N-21
SWITCH - REMOVAL, PASSENGER SEAT
HEATER............................8G-18
SWITCH - REMOVAL, POWER MIRROR . . . 8N-13
SWITCH - REMOVAL, POWER WINDOW . . 8N-25
SWITCH - REMOVAL, WASHER FLUID
LEVEL..............................8R-8
SWITCH AND KEY LOCK CYLINDER -
DIAGNOSIS AND TESTING, IGNITION......19-9
SWITCHES - DESCRIPTION, REMOTE.....8A-14
SWITCHES - DIAGNOSIS AND TESTING,
REMOTE...........................8A-15
SWITCHES - INSTALLATION, REMOTE....8A-16
SWITCHES - OPERATION, REMOTE......8A-15
SWITCHES - REMOVAL, REMOTE........8A-16
SYMBOLS - DESCRIPTION,
INTERNATIONAL....................Intro.-5
SYMBOLS - DESCRIPTION,
INTERNATIONAL.......................0-1
SYSTEM - CLEANING, BATTERY..........8F-5
SYSTEM - CLEANING, WIPER &
WASHER............................8R-6
SYSTEM - DESCRIPTION, AIR INJECTION . 25-26
SYSTEM - DESCRIPTION, BATTERY.......8F-1
SYSTEM - DESCRIPTION, CHIME
WARNING...........................8B-1
SYSTEM - DESCRIPTION, DIESEL FUEL
DELIVERY..........................14-55
SYSTEM - DESCRIPTION, DIESEL FUEL
INJECTION..........................14-91
SYSTEM - DESCRIPTION, EVAP.........25-32
SYSTEM - DESCRIPTION, FUEL
DELIVERY...........................14-2
SYSTEM - DESCRIPTION, HEATED
MIRROR............................8G-1
SYSTEM - DESCRIPTION, HEATED SEAT . . . 8G-5
SYSTEM - DESCRIPTION, INSTRUMENT
PANEL............................23-105
SYSTEM - DESCRIPTION, METRIC
......Intro.-9
SYSTEM - DESCRIPTION, POWER SEAT
. . 8N-16
SYSTEM - DESCRIPTION, REMOTE
KEYLESS ENTRY
......................8N-2
SYSTEM - DESCRIPTION, SPEED
CONTROL
...........................8P-1
SYSTEM - DESCRIPTION, TURN SIGNAL
& HAZARD WARNING
..................8L-2
SYSTEM - DIAGNOSIS AND TESTING,
AIR IN FUEL
........................14-60
SYSTEM - DIAGNOSIS AND TESTING,
AIRBAG
.............................8O-4
SYSTEM - DIAGNOSIS AND TESTING,
BASE BRAKE
..........................5-5
SYSTEM - DIAGNOSIS AND TESTING,
BATTERY
............................8F-2
SYSTEM - DIAGNOSIS AND TESTING,
CHARGING
..........................8F-25
SYSTEM - DIAGNOSIS AND TESTING,
CHIME WARNING
.....................8B-2
SYSTEM - DIAGNOSIS AND TESTING,
HEATED MIRROR
.....................8G-2
SYSTEM - DIAGNOSIS AND TESTING,
HEATED SEAT
........................8G-6
30 INDEXBR/BE
Description Group-Page Description Group-Page Description Group-Page