odometer DODGE RAM 2003 Service Owner's Manual

SPECIAL TOOLS
OVERHEAD CONSOLE
COMPASS/MINI-TRIP
COMPUTER
DESCRIPTION
The Compass Mini-Trip Computer (CMTC) is a
module located in the overhead console. The CMTC is
equipped with a mini-trip feature. The CMTC con-
sists of a electronic control module with a vacuum
fluorescent display (VFD) and function switches. The
CMTC consists of a electronic module that displays
compass, trip computer, and temperature features.
Actuating the STEP push button will cause the
CMTC to change mode of operation when the ignition
is ON. Example:
²Average miles per gallon (ECO)
²Distance to empty (DTE)
²Trip odometer (ODO)²Elapsed time (ET)
²Off
Actuating the C/T push button will cause the
CMTC to change to Compass/Temperature display.
Fig. 4 Variance Settings
DEGAUSSING TOOL #6029
RADIO FREQUENCY DETECTOR #9001
8M - 6 MESSAGE SYSTEMSDR
OVERHEAD CONSOLE (Continued)

Refer toELECTRONIC VEHICLE INFORMA-
TION CENTER PROGRAMMINGin the Standard
Procedures section of this group for more information
on the customer programmable feature options.
If the vehicle is equipped with the optional univer-
sal transmitter transceiver, the EVIC will also dis-
play messages and an icon indicating when the
universal transmitter transceiver is being trained,
which of the three transmitter buttons is transmit-
ting, and when the transceiver is cleared.
Data input for all EVIC functions, including VFD
dimming level, is received through the J1850 PCI
data bus circuit. The EVIC module uses its internal
programming and all of its data inputs to calculate
and display the requested data. If the data displayed
is incorrect, perform the self-diagnostic tests as
described in this group. If these tests prove inconclu-
sive, the use of a DRB IIItscan tool and the proper
Diagnostic Procedures manual are recommended for
further testing of the EVIC module and the J1850
PCI data bus circuit.
The EVIC module cannot be repaired, and is avail-
able for service only as a unit. If any part is faulty or
damaged, the complete EVIC module must be
replaced.
OPERATION
The Electronic Vehicle Information Center is wired
to both constant 12v and ignition switched sources of
battery current so that some of its features remain
operational at any time, while others may only oper-
ate with the ignition switch in the On position. When
the ignition switch is turned to the On position, the
EVIC module display will return to the last function
being displayed before the ignition was turned to the
Off position.
The compass/temperature display is the normal
EVIC display. With the ignition switch in the On
position, momentarily depressing and releasing the
C/T (compass/temperature) push button switch will
cause the EVIC to return to the compass/tempera-
ture display mode from any other mode. While in the
compass/temperature display mode, momentarily
depressing and releasing the Step push button will
step through the available trip computer display
options.
The EVIC trip computer features several functions
that can be reset. The functions that can be reset
are: average fuel economy, trip odometer and elapsed
time. With the ignition switch in the On position and
with one of the functions of the trip computer that
can be reset currently displayed, depressing the
Reset push button twice within three seconds will
perform a global reset, and all of the trip computer
information that can be reset will be reset to zero.
With the ignition switch in the On position and thefunction that is to be reset currently displayed,
momentarily depressing and releasing the Reset
push button once will perform a local reset, and only
the value of the displayed function will be reset to
zero. A global or local reset will only occur if the
function currently displayed is a function that can be
reset. The distance to service function can also be
reset using the local reset method, but it will reset
back to the Service Interval distance that is set in
the EVIC programmable features mode. Refer to
ELECTRONIC VEHICLE INFORMATION CEN-
TER PROGRAMMINGin the Standard Procedures
section of this group for more information on setting
the Service Interval.
For more information on the features, control func-
tions and setting procedures for the EVIC module,
see the owner's manual in the vehicle glove box.
DIAGNOSIS AND TESTING - ELECTRONIC
VEHICLE INFORMATION CENTER
Electronic Vehicle Information Center (EVIC) data
is obtained from other electronic modules (CCN,
FCM, JTEC) on the J1850 Data Bus circuit. The
EVIC will display dashes (- -) for any of the screens
it did not receive the bus messages. The label corre-
sponding to the missing information will be lit. If no
EVIC data is displayed, check the J1850 Data Bus
circuit communications and the other modules. If the
brightness level is improper check the J1850 Data
Bus circuit.
Refer to Overhead Console Diagnosis and Testing
for instructions on performing a EVIC module Self-
Diagnostic Test. The DRB IIItis recommended for
checking the J1850 Data Bus circuit and other mod-
ules. Perform the EVIC self diagnosis before replac-
ing the EVIC module.
STANDARD PROCEDURE - ELECTRONIC
VEHICLE INFORMATION CENTER
PROGRAMMING
EVIC PROGRAMMING MODE
Some vehicles are equipped with a Electronic Vehi-
cle Information Center (EVIC) equipped overhead
console. The Electronic Vehicle Information Center
(EVIC) provides the vehicle operator with a user
interface, which allows the selection of several
optional customer programmable electronic features
to suit individual preferences. The EVIC must be
placed into its programming mode in order to view or
change the programmable features. To enter the
EVIC programming mode and to view or change the
selected programmable features options, proceed as
follows:
(1) Turn the ignition switch to the On position.
8M - 8 MESSAGE SYSTEMSDR
ELECTRONIC VEHICLE INFO CENTER (Continued)

(2) Momentarily depress and release the Menu
push button to step through the programmable fea-
tures list. Each programmable feature and its cur-
rently selected option will appear on the EVIC
display in the sequence shown in the Programmable
Features list that follows.
(3) Momentarily depress and release the Step push
button to step through the available options for the
programmable feature being displayed.
(4) The option that last appears in the display
with a programmable feature before exiting the pro-
gramming mode, becomes the newly selected pro-
grammable feature option.
(5) The EVIC exits the programming mode and
returns to its normal operating mode when the C/T
push button is depressed or when the end of the pro-
grammable features menu list is reached, whichever
occurs first.
PROGRAMMABLE FEATURES
²LANGUAGE?- The options include English,
Francaise, Deutsch, Italiana, or Espanol. The default
is English. All EVIC display nomenclature, including
the trip computer functions, warning messages and
the programmable features appear in the selected
language.
²DISPLAY U.S. OR METRIC?- The options
include U.S. and M. The default is U.S. This feature
toggles the trip computer temperature, fuel economy
and odometer display readings between U.S. and
metric units of measure.
²SERVICE INTV. =- The options include from
3200 to 12000 kilometers in 800 kilometer incre-
ments (2000 to 6000 miles in 500 mile increments).
The default is 12000 kilometers (6000 miles). The
selected distance becomes the interval at which the
Perform Service warning message will be displayed
by the EVIC. If a new distance is selected, a second
programmable feature appears,RESET SERVICE
DISTANCE?- The options include No and Yes. The
default is Yes. When Yes is selected, the accumulated
distance since the last previous Perform Service
warning message will be reset to zero because the
service interval has been changed. When No is
selected, the distance until the next Perform Service
warning message is reduced by the accumulated dis-
tance since the last previous message.
²AUTO DOOR LOCKS?- The options include
Yes and No. The default is Yes. When Yes is selected,
all doors lock automatically when vehicle speed
reaches 25 kilometers-per-hour (15 miles-per-hour). If
YES is selected, a second programmable feature
appears,AUTO UNLOCK ON EXIT?- The options
again include Yes and No. The default is No. When
Yes is selected, following each Auto Door Lock event
all doors will automatically unlock when the driverdoor is opened, if the vehicle is stopped and the
transmission gear selector is in Park or Neutral. The
Auto Door Unlock event will only occur once follow-
ing each Auto Door Lock event.
²REMOTE UNLOCK- The options include
Driver Door 1st and All Doors. The default is Driver
Door 1st. When Diver Door 1st is selected, only the
driver door unlocks when the Unlock button of the
Remote Keyless Entry (RKE) transmitter is
depressed once. The Unlock button of the RKE trans-
mitter must be depressed twice to unlock all doors.
When All Doors is selected, all doors unlock when the
Unlock button of the RKE transmitter is depressed
once.
²SOUND HORN ON LOCK?- The options
include On and Off. The default is No. When Yes is
selected, a short horn chirp will provide an audible
confirmation when the RKE receiver recognizes a
valid Lock signal from an RKE transmitter. When No
is selected, no horn chirp will occur with the RKE
Lock event. This feature may be selected indepen-
dent of theFLASH LIGHTS WITH LOCKS?pro-
grammable feature.
²FLASH LIGHTS WITH LOCKS?- The options
include Yes and No. The default is Yes. When Yes is
selected, a single flash of the hazard warning lamps
will provide an optical confirmation when the RKE
receiver recognizes a valid Lock signal from an RKE
transmitter, and two flashes of the same lamps will
occur when the RKE receiver recognizes a valid
Unlock signal from an RKE transmitter. When No is
selected, no lamp flash will occur with the RKE Lock
or Unlock event. This feature may be selected inde-
pendent of theSOUND HORN ON LOCK?pro-
grammable feature.
²HEADLAMP DELAY =- The options include
Off, 30 Sec, 60 Sec, and 90 Sec. The default is 90 Sec.
When a time interval is selected, the headlamps will
remain on for that length of time when the head-
lamps are turned off after the ignition is turned off,
or if the Auto mode is selected on vehicles with the
Auto Headlamps option. When Off is selected, the
headlamp delay feature is disabled.
²TRAIN REMOTE- When this feature is
selected the driver can choose to train up to four
remote keyless entry transmitters. The options
include Yes and No. The default is No. When Yes is
selected and the MENU button is pressed the EVIC
will display ªPRESS REMOTE LOCK & UNLOCK
THEN PRESS UNLOCKº, followed by a chime to
indicate the training sequence can commence. You
have approximately 30 seconds to train up to four
transmitters, after each transmitter is trained a
chime will sound indicating that the training was
successful. If remote link to memory is ªYESº , the
first transmitter trained will be associated with
DRMESSAGE SYSTEMS 8M - 9
ELECTRONIC VEHICLE INFO CENTER (Continued)

NV4500 - SPECIFICATIONS, MANUAL
TRANSMISSION......................21-79
NV5600 - ASSEMBLY, MANUAL
TRANSMISSION.....................21-105
NV5600 - DESCRIPTION, MANUAL
TRANSMISSION......................21-87
NV5600 - DIAGNOSIS AND TESTING,
MANUAL TRANSMISSION..............21-89
NV5600 - DISASSEMBLY, MANUAL
TRANSMISSION......................21-90
NV5600 - INSPECTION, MANUAL
TRANSMISSION.....................21-104
NV5600 - INSTALLATION, MANUAL
TRANSMISSION.....................21-120
NV5600 - OPERATION, MANUAL
TRANSMISSION......................21-89
NV5600 - REMOVAL, MANUAL
TRANSMISSION......................21-89
NV5600 - SPECIAL TOOLS, MANUAL
TRANSMISSION.....................21-122
NV5600 - SPECIFICATIONS............21-122
ODOMETER - DESCRIPTION............8J-31
ODOMETER - OPERATION..............8J-31
OFF INDICATOR - DESCRIPTION,
OVERDRIVE.........................8J-33
OFF INDICATOR - OPERATION,
OVERDRIVE.........................8J-33
OIL - DESCRIPTION, REFRIGERANT......24-54
OIL - OPERATION, REFRIGERANT........24-54
OIL - STANDARD PROCEDURE, ENGINE . . 9-269,
9-396
OIL AND LUBRICANTS - DESCRIPTION,
ENGINE..............................0-2
OIL COOLER - INSTALLATION, AIR TO.....7-75
OIL COOLER - REMOVAL, AIR TO.........7-74
OIL COOLER - REMOVAL, WATER TO......7-74
OIL FILTER - INSTALLATION . 9-153,9-217,9-270,
9-342,9-397,9-70
OIL FILTER - REMOVAL.....9-152,9-216,9-270,
9-342,9-397,9-69
OIL LEAK - DIAGNOSIS AND TESTING,
ENGINE...................9-150,9-214,9-63
OIL LEAKS - DIAGNOSIS AND TESTING,
ENGINE.......................9-269,9-394
OIL LEVEL - STANDARD PROCEDURE,
ENGINE............................9-341
OIL LEVEL - STANDARD PROCEDURE,
REFRIGERANT.......................24-54
OIL PAN - CLEANING . . . 9-270,9-342,9-397,9-65
OIL PAN - DESCRIPTION................9-65
OIL PAN - INSPECTION . . 9-271,9-342,9-397,9-66
OIL PAN - INSTALLATION . . . 9-153,9-217,9-271,
9-342,9-398,9-66
OIL PAN - REMOVAL . . 9-153,9-217,9-270,9-342,
9-397,9-65
OIL PRESSURE - DIAGNOSIS AND
TESTING, CHECKING ENGINE . . 9-150,9-214,9-64
OIL PRESSURE - DIAGNOSIS AND
TESTING, ENGINE..........9-269,9-338,9-396
OIL PRESSURE GAUGE - DESCRIPTION . . . 8J-32
OIL PRESSURE GAUGE - OPERATION.....8J-32
OIL PRESSURE RELIEF VALVE -
CLEANING..........................9-343
OIL PRESSURE RELIEF VALVE -
INSPECTION........................9-343
OIL PRESSURE RELIEF VALVE -
INSTALLATION.......................9-343
OIL PRESSURE RELIEF VALVE -
REMOVAL..........................9-343
OIL PRESSURE SENSOR/SWITCH -
DESCRIPTION........................9-66
OIL PRESSURE SENSOR/SWITCH -
INSTALLATION...................9-343,9-67
OIL PRESSURE SENSOR/SWITCH -
OPERATION..........................9-66
OIL PRESSURE SENSOR/SWITCH -
REMOVAL......................9-343,9-67
OIL PUMP - ASSEMBLY......9-156,9-274,9-68
OIL PUMP - ASSEMBLY . . 21-215,21-393,21-566
OIL PUMP - CLEANING . 9-155,9-218,9-344,9-398
OIL PUMP - CLEANING
. . . 21-214,21-393,21-566
OIL PUMP - DESCRIPTION
......21-212,21-392,
21-562
OIL PUMP - DISASSEMBLY
. . . 9-155,9-272,9-67
OIL PUMP - DISASSEMBLY
.....21-212,21-393,
21-564
OIL PUMP - INSPECTION
....9-155,9-218,9-272,
9-344,9-399,9-67OIL PUMP - INSPECTION . 21-214,21-393,21-566
OIL PUMP - INSTALLATION . . 9-157,9-219,9-274,
9-344,9-400,9-68
OIL PUMP - OPERATION . . 21-212,21-392,21-562
OIL PUMP - REMOVAL......9-154,9-218,9-272,
9-343,9-398,9-67
OIL PUMP FRONT SEAL - INSTALLATION . 21-567
OIL PUMP FRONT SEAL - REMOVAL....21-567
OIL PUMP VOLUME CHECK - STANDARD
PROCEDURE.......................21-563
OIL SEAL - FRONT - DESCRIPTION,
CRANKSHAFT.......................9-254
OIL SEAL - FRONT - INSTALLATION,
CRANKSHAFT....9-134,9-203,9-255,9-324,9-45
OIL SEAL - FRONT - OPERATION,
CRANKSHAFT.......................9-254
OIL SEAL - FRONT - REMOVAL,
CRANKSHAFT....9-134,9-203,9-254,9-323,9-44
OIL SEAL - FRONT COVER INSTALLED -
INSTALLATION, FRONT................9-384
OIL SEAL - FRONT COVER INSTALLED -
REMOVAL, FRONT....................9-384
OIL SEAL - FRONT COVER REMOVED -
INSTALLATION, FRONT................9-384
OIL SEAL - FRONT COVER REMOVED -
REMOVAL, FRONT....................9-384
OIL SEAL - REAR - DESCRIPTION,
CRANKSHAFT.......................9-255
OIL SEAL - REAR - INSTALLATION,
CRANKSHAFT . . . 9-136,9-204,9-256,9-325,9-385,
9-46
OIL SEAL - REAR - OPERATION,
CRANKSHAFT.........................9-255
OIL SEAL - REAR - REMOVAL,
CRANKSHAFT . . . 9-135,9-204,9-255,9-325,9-385,
9-45
OIL SEAL RETAINER - INSTALLATION,
CRANKSHAFT REAR........9-205,9-326,9-386
OIL SEAL RETAINER - REMOVAL,
CRANKSHAFT REAR........9-204,9-326,9-386
OIL SERVICE - STANDARD PROCEDURE,
ENGINE..............9-151,9-215,9-341,9-70
ON-BOARD DIAGNOSTICS (OBD) -
DIAGNOSIS AND TESTING...............7-5
ONLY - ASSEMBLY, 5.9L................7-73
ONLY - DISASSEMBLY, 5.9L.............7-73
ON/OFF RELAY - DESCRIPTION, WIPER . . . 8R-25
ON/OFF RELAY - DIAGNOSIS AND
TESTING, WIPER.....................8R-26
ON/OFF RELAY - INSTALLATION, WIPER . . 8R-26
ON/OFF RELAY - OPERATION, WIPER....8R-25
ON/OFF RELAY - REMOVAL, WIPER......8R-26
ON/OFF SWITCH - DESCRIPTION,
PASSENGER AIRBAG.................8O-38
ON/OFF SWITCH - INSTALLATION,
PASSENGER AIRBAG.................8O-39
ON/OFF SWITCH - OPERATION,
PASSENGER AIRBAG.................8O-38
ON/OFF SWITCH - REMOVAL,
PASSENGER AIRBAG.................8O-39
OPEN-CIRCUIT VOLTAGE TEST -
STANDARD PROCEDURE...............8F-10
OPENING COVER - INSTALLATION,
STEERING COLUMN..................23-61
OPENING COVER - REMOVAL, STEERING
COLUMN...........................23-61
OPENING DIMENSIONS -
SPECIFICATIONS, BODY
...............23-99
OPENING SEAL - INSTALLATION, DOOR
. . . 23-92
OPENING SEAL - REMOVAL, DOOR
......23-92
OPENING SUPPORT BRACKET -
INSTALLATION, STEERING COLUMN
......23-62
OPENING SUPPORT BRACKET -
REMOVAL, STEERING COLUMN
.........23-61
OPERATING MODES, STANDARD
PROCEDURE - CONFIGURING A NEW
MODULE / SWITCH
....................8Q-3
ORDER / CABLE ROUTING, 5.7L V-8
ENGINE - FIRING
......................8I-4
ORDER, 3.7L V-6 - ENGINE FIRING
........8I-4
ORDER, 4.7L V-8 - ENGINE FIRING
........8I-4
ORDER, 5.9L V-8 - ENGINE FIRING
........8I-4
ORDER, 8.0L V-10 ENGINE - SPARK
PLUG CABLE
.........................8I-5
ORDER, DIESEL - FUEL INJECTOR
FIRING
.............................14-60
ORIFICE TUBE - DESCRIPTION, A/C
......24-48ORIFICE TUBE - DIAGNOSIS AND
TESTING, FIXED.....................24-48
ORIFICE TUBE - INSTALLATION, A/C......24-49
ORIFICE TUBE - OPERATION, A/C........24-48
ORIFICE TUBE - REMOVAL, A/C.........24-49
OUT INDICATOR - DESCRIPTION, LAMP . . . 8J-28
OUT INDICATOR - OPERATION, LAMP....8J-28
OUTBOARD - INSTALLATION, CENTER &
LEFT..............................8O-45
OUTBOARD - INSTALLATION, CENTER
ANCHOR & RIGHT...................8O-45
OUTBOARD - REMOVAL, CENTER & LEFT . 8O-43
OUTBOARD - REMOVAL, CENTER
ANCHOR & RIGHT...................8O-43
OUTBOARD SEAT BELT & RETRACTOR -
INSTALLATION, REAR.................8O-42
OUTBOARD SEAT BELT & RETRACTOR -
REMOVAL, REAR....................8O-41
OUTBOARD SEAT BELT BUCKLE -
INSTALLATION, FRONT................8O-34
OUTBOARD SEAT BELT BUCKLE -
REMOVAL, FRONT....................8O-33
OUTER BELT MOLDING - INSTALLATION,
FRONT DOOR.......................23-93
OUTER BELT MOLDING - INSTALLATION,
REAR DOOR........................23-94
OUTER BELT MOLDING - REMOVAL,
FRONT DOOR.......................23-93
OUTER BELT MOLDING - REMOVAL,
REAR DOOR........................23-94
OUTER TIE ROD END - DIAGNOSIS AND
TESTING.............................19-31
OUTER TIE ROD END - INSTALLATION....19-32
OUTER TIE ROD END - REMOVAL.......19-31
OUTLET - DESCRIPTION, CIGAR
LIGHTER.........................8W-97-2
OUTLET - DESCRIPTION, POWER......8W-97-7
OUTLET - DIAGNOSIS AND TESTING,
CIGAR LIGHTER...................8W-97-2
OUTLET - DIAGNOSIS AND TESTING,
POWER..........................8W-97-7
OUTLET - INSTALLATION, POWER.....8W-97-7
OUTLET - OPERATION, CIGAR LIGHTER . 8W-97-2
OUTLET - OPERATION, POWER.......8W-97-7
OUTLET - REMOVAL, POWER.........8W-97-7
OUTLETS - INSTALLATION, PANEL.......24-24
OUTLETS - REMOVAL, PANEL...........24-24
OUTPUT - DESCRIPTION, PCM...........8I-6
OUTPUT - OPERATION, PCM............14-32
OUTPUT - OPERATION, PCM.............8I-6
OUTPUT SHAFT FRONT BEARING -
INSTALLATION................21-217,21-395
OUTPUT SHAFT FRONT BEARING -
REMOVAL...................21-217,21-395
OUTPUT SHAFT REAR BEARING -
INSTALLATION................21-217,21-396
OUTPUT SHAFT REAR BEARING -
REMOVAL...................21-217,21-395
OUTPUT SHAFT SEAL - INSTALLATION,
FRONT..........21-618,21-653,21-683,21-717
OUTPUT SHAFT SEAL - REMOVAL,
FRONT..........21-617,21-653,21-683,21-717
OUTPUT SPEED SENSOR - DESCRIPTION . 21-567
OUTPUT SPEED SENSOR -
INSTALLATION......................21-567
OUTPUT SPEED SENSOR - OPERATION
. . 21-567
OUTPUT SPEED SENSOR - REMOVAL
. . . 21-567
OVERDRIVE CLUTCH - DESCRIPTION
. . . 21-218,
21-396
OVERDRIVE CLUTCH - OPERATION
.....21-218,
21-396
OVERDRIVE ELECTRICAL CONTROLS -
DIAGNOSIS AND TESTING
......21-219,21-397
OVERDRIVE OFF INDICATOR -
DESCRIPTION
.......................8J-33
OVERDRIVE OFF INDICATOR -
OPERATION
.........................8J-33
OVERDRIVE SWITCH - DESCRIPTION
. . . 21-218,
21-397,21-568
OVERDRIVE SWITCH - INSTALLATION
. . . 21-219,
21-397,21-569
OVERDRIVE SWITCH - OPERATION
.....21-218,
21-397,21-568
OVERDRIVE SWITCH - REMOVAL
......21-219,
21-397,21-568
OVERDRIVE UNIT - ASSEMBLY
. . . 21-228,21-406
OVERDRIVE UNIT - CLEANING
. . . 21-227,21-405
DRINDEX 23
Description Group-Page Description Group-Page Description Group-Page