Time FIAT 500 2018 Owner handbook (in English)

89
In the upper part: information on the
track being played and the following
graphic buttons:
❒ “Repeat”: to repeat the track being
played;
❒ “Shuffle”: to play the tracks in
random order.
In the middle: information on the
track being played.
On the left: display of the following
buttons:
❒ Selected device or audio source;
❒ “Select source”: select the required
audio source.
On the right: display of the following
buttons:
❒ “Info”: additional information on the
track being played;
❒ “Tracks”: list of available tracks.
❒ “Map”: navigation map view
(Uconnect™7” HD Nav LIVE
versions only).At the bottom: information on the
track being played and the following
graphic buttons:
Active device or audio source;
❒
÷/ ˜: select previous/next
track;
❒
II: pause track being played;
❒ “Audio”: access to the “Audio
Settings” screen.
Track selection (Browse)
The “Tracks” function allows you to
open a window with the list of tracks
being played.
The choices available depend on the
device connected.
For example, on a USB device, you
can also use the SCROLL TUNE
button/knob to browse the list of
artists, genres and albums available on
the device, depending on the
information available on the tracks.
NOTE This button may be disabled for
some Apple®devices.
Turn the SCROLL TUNE button/knob
to select the desired category and then
press it to confirm the selection.NOTE The "Tracks" button does not
allow any operation on the AUX device
(where provided).
NOTE The indexing time of a USB
device can vary according to the
media inserted (in some cases it can
take a few minutes).
Bluetooth® SOURCE
This mode is activated by pairing a
Bluetooth® device containing music
tracks with the system.
PAIRING A Bluetooth®
AUDIO DEVICE
To pair a Bluetooth®audio device,
proceed as follows:
❒ activate the Bluetooth®function
on the device;
❒ press the “Media” button on the
display;
❒ press the “Select Source” button;
❒ select the Bluetooth® Media
source;
❒ press the “Add Device” graphic
button;

93
SIRI EYES FREE
(available with iPhone 4S and higher
and compatible iOS only)
After having paired the Siri enabled
device to Uconnect™ hold the
}button
on the steering wheel pressed and then
release it.
After the double beep, you can start
interacting with Siri, to listen to music,
make calls, read text messages and
more.
Uconnect™ LIVE
SERVICES
Press the Uconnect™ button to
access the Uconnect™ LIVEapps.
The services available depend on the
car configuration and the market.
To use the Uconnect™ LIVE
services, you need to download the
Uconnect™ LIVEapp from Google
Play or Apple Store and register using
the app or on www.DriveUconnect.eu.
First access to the vehicle
Once you have launched the
Uconnect™ LIVEapp and entered
your details, you have to pair the
Bluetooth® with your smartphone and
the radio, as described in the “Pairing
a mobile phone” chapter, to access
the Uconnect™ LIVEservices in your
vehicle.When pairing is complete, the
connected services can be accessed
by pressing the Uconnect™ LIVE
icon on the radio.
Before you can use the connected
services, you must first do the
Bluetooth®pairing, then complete
the activation procedure by following
the instructions that appear in the
Uconnect™ LIVEapp.
Setting of Uconnect™ LIVE
services that can be managed
through the radio
In the Uconnect™ LIVEradio menu
the “Settings” section can be accessed
by pressing the icon . In this
section the user can check the system
options and change them according to
their preferences.
System updates
If an update for the Uconnect™ LIVE
system is available while the
Uconnect™ LIVEservices are being
used, you will be informed with a
message on the radio screen.
Connected services that can be
accessed on the vehicle
The eco:Drive™ and my:Car
applications were developed to
improve the customer’s driving
experience, therefore they are available
in all markets, where the Uconnect™
LIVEservices can be accessed.
If the navigation system is installed in
the radio, accessing the Uconnect™
LIVE services enables use of the
“Live” services.
eco:Drive™
The eco:Drive™ application allows you
to display your driving behaviour in real
time, in order to help you reach a more
efficient driving style as far as
consumption and emissions are
concerned.
In addition, the data can be saved on a
USB flash drive, and the data analysis
can be made on your personal
computer thanks to the eco:Drive™
desktop application, available on
www.DriveUconnect.eu.
Driving style is evaluated by means of
four indices which monitor the
following parameters: acceleration,
deceleration, gearchange, speed.

KNOWING YOUR CAR
94
eco:Drive™ display
Press the eco:Drive™ button to
interact with the function.
A screen will appear on the radio
showing 4 indices:
Acceleration, Deceleration, Speed and
Gear. These indices are grey until the
system has enough data to evaluate
the driving style.
Once sufficient data are available, the
indices will have 5 colours depending
on the evaluation: dark green (very
good), light green, yellow, orange and
red (very bad).
In the event of extended inactivity, the
display will show the average of the
indices until that moment (the “Average
index”), then the indices will be
coloured again in real time as soon as
the vehicle is restarted.
Recording and transferring
trip data
The trip data can be stored in the
system memory and transferred using
a suitably configured USB memory
stick or by Uconnect™ LIVEapp. This allows you to display the history of
the collected data, showing the
complete analysis of the trip data and
of your driving style.
Further information is available at
www.DriveUconnect.eu.
my:Car
my:Car allows you to keep the “health”
of your vehicle always under control.
my:Car can detect malfunction in real
time and inform the user about the
expiry of the servicing interval. Press
the “my:Car” button to interact with the
application.
The display will show a screen with the
“care:Index” section, which provides all
the detailed information about the
status of the vehicle. Press the
“Active warnings” button (if present) to
show the details of the vehicle faults
which caused a warning light to switch
on.Apple CarPlay and
Android Auto
(for versions/markets, where provided)
The Apple CarPlay and Android Auto
applications allow you to use your
smartphone in the car safely and
intuitively. To enable them, just
connect a compatible smartphone to
the USB port and the contents of the
phone will be automatically shown on
the Uconnect™ system display.
To check the compatibility of your
smartphone, refer to the indications on
the websites:
https://www.android.com/intl/it_it/auto/
and http://www.apple.com/it/ios/carplay/.
If the smartphone is connected
correctly to the car via the USB port,
the Apple CarPlay or Android Auto
icon will be displayed in place of the
button in the main menu.
Android Auto – app configuration
Before use, download the Android
Auto application to your smartphone
from Google Play Store.
The application is compatible with
Android 5.0 (Lollipop) and later
versions.

95
To use Android Auto, the smartphone
must be connected to the car with a
USB cable.
On the first connection, you will have to
perform the setup procedure that
appears on the smartphone. You can
only perform this procedure with the
vehicle stationary.
Apple CarPlay – app configuration
Apple CarPlay is compatible with the
iPhone 5 or more recent models, with
the iOS 7.1 operating system or later
versions.
Before using Apple CarPlay, enable Siri
from Settings General Siri on the
smartphone.
To use Apple CarPlay, the smartphone
must be connected to the car with a
USB cable.
NOTE Enabling Apple CarPlay/Android
Auto or some functions could require
interaction on the smartphone. If
necessary, complete the step on your
device (smartphone).Interaction
After the setup procedure, the
application will run automatically on the
Uconnect™system when your
smartphone is connected to the USB
port in the car.
You can interact with Apple CarPlay
and Android Auto using the steering
wheel controls (long press of the
}button), using the SCROLL TUNE
button/knob to select and confirm or
using the Uconnect™system
touchscreen.
Navigation
With the Apple CarPlay and Android
Auto applications, the user can choose
to use the navigation system on their
smartphone.
If the system "Nav" mode is already on,
a warning pop-up will appear on the
Uconnect™system display when a
device is connected to the car with a
navigation session in progress.
The pop-up allows the user to choose
between using the system navigation
and using navigation controlled by the
smartphone.
The user can choose to change their
selection at any time by accessing the
navigation system that they want to
use and setting a new destination.Setting "AutoShow smartphone
display on connection"
Through the Uconnect™system
settings, the user can decide to view
the smartphone screen on the
Uconnect™system display as soon
as the smartphone is connected via the
USB port. When this function is set,
each time a connection is made via
USB, the Apple CarPlay or Android
Auto apps will run automatically on the
radio screen.
The "AutoShow smartphone display
on connection" item can be found in
the "Display" submenu. The function is
enabled by default.
NOTES
❒ Bluetooth®is disabled while Apple
CarPlay is being used
❒ Bluetooth®remains on while
Android Auto is being used
❒ The data connection will depend on
the tariff plan of the smarphone
This information may be subject to
changes that depend on the
smartphone's operating system.

97
Select this button to open the
“Settings” menu;
Select this graphic button to
open the “Help” menu.
The “Help” menu contains
information on Uconnect™
system, for example the map
version, the serial number of
the device and the legal
notices.
Select this graphic button to
go back to the navigation
view.
Select this button to activate
voice instructions.
Select off to no longer hear
voice instructions. You will still
receive information such as
traffic information and
warning sounds. Tip: you can
deactivate the warning
sounds by selecting
“Settings”, then “Sounds and
warnings”.Select this button to increase
the screen brightness and
display the map in brighter
colours.
When driving at night or in
unlit tunnels, watching the
screen is more comfortable
and less distracting for the
driver if the map uses darker
colours.
Tip: the device will
automatically switch between
day and night view depending
on the time of day. To
deactivate this function, select
“Appearance” in the
“Settings” menu and deselect
the option “Switch to night
colours” when it is dark.
Updating maps using Mopar®
Map Care
To ensure optimal performance, the
navigation system must be updated
periodically. For this reason, the Mopar®
Map Care service offers a new map
update every three months.
The updates can be downloaded from
the maps.mopar.eu website and
installed directly on the navigator
in your car. All updates are free of
charge for 3 years from the start of the
warranty on the vehicle.
The navigation system can also be
updated at the Fiat Dealership (the
dealer may charge for updating the
navigation system).
VOICE COMMANDS
NoteFor languages not supported by
the system, voice commands are not
available.
To use the voice commands, press the
}button on the steering wheel and
say out loud the command you want
to activate.
Global
The following voice commands can be
given after pressing the button on the
steering wheel
}:
❒ Help
❒ Cancel
❒ Repeat
❒ Voice Prompts
Phone
The following voice commands can be
given after pressing the button on the
steering wheel
}:
❒ Call
❒ Dial
❒ Redial
❒ Call back

99
MOPAR®CONNECT
(where provided)
These services let you keep your
vehicle under control at all times and
receive assistance in the event of
accident, theft or breakdown.
To have these services, install the
Mopar
®Connect Device on your
vehicle from the country (list available
on the www.driveuconnect.eu website)
and request activation by following the
instructions received at the email
address given when you picked up the
vehicle.
To use the connected services, you
must download the Uconnect™ LIVE
App or access the
www.driveuconnect.eu portal.
You can find all the details about the
services in the Mopar
®Connect
section of the www.driveuconnect.eu
portal.
PRIVACY MODE
Privacy mode lets you disable the
“Find car”, “Notify Area” and “Notify
Speed” services, which allow
registered customers to locate their
cars, for a fixed time.
IMPORTANT NOTE Vehicle position
tracing remains active for the
assistance services, where provided,
in the event of accident or vehicle
theft, but is not visible to the customer.
PRIVACY MODE
activation procedure
Proceed as follows:
❒ note down the current total mileage
(in km);
❒ make sure that the instrument
panel is off;
❒ Send the following text message to
+393424112613: “PRIVACY

”
(e.g.: PRIVACY
ZFA3340000P123456 12532).You can find the chassis number in the
registration document;
❒ before starting the engine, wait to
receive the text message
confirming that Privacy mode has
been activated and indicating when
it expires.
When you have received the
confirmation, you can start your trip in
the knowledge that the vehicle will not
be traced until the indicated expiry
time.
If it expires while you are still travelling,
Privacy mode will be extended until
you turn off the engine (instrument
panel off).
If you receive a text message
indicating that your request was not
successful, you must be aware that
the vehicle will continue to be visible to
the registered customer.
If you have any doubts or problems
during activation, consult the FAQ on
the www.driveuconnect.eu portal,
contact the Fiat Dealership or contact
Customer Care.

SAFETY
102
Press button C fig. 67 to release the
belt.
Guide the belt while it is rewinding to
prevent it from twisting.
The retractor may lock when the
vehicle is parked on a steep slope: this
is perfectly normal.
Furthermore, the reel mechanism locks
the belt if it is pulled sharply or in the
event of sudden braking, collisions and
high-speed bends.
The rear seat is fitted with inertia seat
belts with three anchor points and a
retractor.
NOTE Wear the rear seat belts as
shown in fig. 68.
67DVDF0S041c
IMPORTANT When putting the seats
back to their normal position, make
sure the seat belts are positioned so
they are ready to use.
SBR SYSTEM
(for versions/markets, where provided)
The SBR system warns the
passengers of the front and rear (for
versions/markets, where provided)
seats if their seat belt is not fastened.
The system signals unfastened seat
belts with visual warnings (warning
lights on in the instrument panel and
icons on the display) and an acoustic
signal (see the following paragraphs).
NOTE Contact a Fiat Dealership to
deactivate this acoustic warning
permanently. The acoustic warning can
be reactivated at any time through the
display Setup Menu.
68DVDF0S0056c
Seat belts warning
light operation
The system warns the driver and the
front passenger if their seat belt is not
fastened, as follows:
❒ flashing
intermittent acoustic warning for
about 100 seconds.
❒ once the cycle has finished, the
warning light remains on constantly
until the seat belts are fastened.
PRE-TENSIONERS
The car is equipped with front seat belt
pretensioners, which in the event of a
major frontal impact guarantee the
perfect adherence of the seat belts to
the occupant’s bodies before the
retention action begins.

IN AN EMERGENCY
130
❒ Fit the handle to operate the jack
and raise the car until the wheel is a
few centimetres above the ground.
When turning the jack handle, make
sure that it can turn freely without
scraping your hand against the
ground. The moving components of
the jack (screws and joints) can also
cause injuries: avoid touching them.
If you come into contact with
lubricating grease, clean yourself
thoroughly.
❒ Loosen the bolts completely and
remove the wheel to be replaced.
❒ Make sure the contact surfaces
between space-saver wheel and
resting surfaces are clean so that
the fastening bolts will not come
loose.
❒ Fit the space-saver wheel aligning
the pin with one of the holes on the
wheel.
❒ Tighten the 4 fixing bolts, turn the
jack handle to lower the car and
remove the jack.
❒ Fasten the bolts completely,
passing alternately from one bolt to
the opposite one.REFITTING THE WHEEL
32) 40)
Versions with steel wheels
❒ Make sure the contact surfaces
between standard wheel and hub
are clean so that the fastening bolts
will not come loose.
❒ Fit the standard wheel inserting the
4 bolts into the holes, then tighten
them.
❒ Lower the car and remove the jack.
❒ Use the wrench provided to fully
tighten the bolts, passing alternately
from one bolt to the opposite one;
❒ Insert the pressure-fit cup making
the suitable slot coincide with the
inflation valve;
❒ Place the inner part of the hub cap
on the wheel rim;
❒ Engage the hub cap by applying an
axial force in several points as
shown in fig. 104 to allow the
correct coupling between hub cap
and wheel.
Versions with alloy wheels
❒ Place the wheel onto the hub and
tighten the bolts using the wrench
provided.
❒ Lower the car and remove the jack.
❒ Using the spanner provided, fully
tighten the bolts.
❒ Reinsert the press-fitted hub cap,
making sure that the reference hole
on the wheel is aligned with the
reference pin on the cap.
IMPORTANT: if it is not fitted correctly,
the hub cap may detach when the car
is running.
104DVDF0S461c

135
TYPES OF BULBS
BulbsTypePower
Main beam headlights H7 55W
Dipped beam headlights H7 55W
Xenon gas discharge dipped beam headlights D1S 35W
Side lights / daytime running lights W21W / LL 5W / 21W
Front direction indicators PY24W / WY21W 21W
Front direction indicators (with xenon gas discharge bulbs) PY24W 24W
Side direction indicators W5W 5W
Rear direction indicators PY21W 21W
Tail lights/brake lights P21 / 5W 10W
Reversing light, rear fog light W16W 21W
Ceiling light C5W 5W
Luggage compartment ceiling light W5W 5W
Number plate C5W 5W
Fog light H3 55W
Additional stop (3rd braking) W5W 5W

IN AN EMERGENCY
136
FRONT LIGHT CLUSTERS
The front light clusters contain side
lights, dipped headlights, main beam
headlights and direction indicator bulbs.
Access to the direction indicator
bulbs (POP versions)
Operating from the engine
compartment, remove the rubber cap
A fig. 111.
Access to the main beam headlight
bulbs (POP versions)
Remove the rubber cap B fig. 111.
111DVDF0S0114c
Access to the direction indicator
bulbs (excluding POP versions)
Operating from the engine
compartment, remove the rubber cap
A fig. 112.
Access to the main beam headlight
bulbs (excluding POP versions)
Operating from the engine
compartment, remove the rubber cap
B fig. 112.
112DVDF0S0196c
Access to the daytime running light
(DRL) and main beam headlight
bulbs
Completely steer the wheels and open
guard door C fig. 113 (on the wheel
arch at the level of the lights) then
remove the rubber cap D.
113DVDF0S0115c