engine FIAT 500 2018 Owner handbook (in English)

TECHNICAL DATA
166
CHASSIS MARKING
The plate can be found on the right side
of the boot floor and it bears the
following identification data fig. 150:
❒ vehicle model;
❒ the chassis progressive number.
150DVDF0S0135c
ENGINE MARKING
It is stamped on the cylinder block and
includes the type and the engine serial
number.

167
ENGINE
GENERAL0.9TwinAir 65 HP0.9TwinAir 85 HP0.9TwinAir 105 HP
Engine code 312A4000 312A2000 199B6000
Cycle Otto Otto Otto
Number and position of cylinders 2 straight 2 straight 2 straight
Piston diameter and stroke (mm) 83.5 x 88 80.5 x 86.0 80.5 x 86.0
Total capacity (cm3
) 964 875 875
Compression ratio 11.1 : 1 10 ± 02 : 1 10 ± 02 : 1
Maximum power (EEC) (kW) 48 62.5 77 (*) 72 (**)
Maximum power (EEC) (HP) 65 85 105 (*) 98 (**)
corresponding engine speed (rpm) 6250 5500 5500 (*) 5500 (**)
Maximum torque (EEC) (Nm) 88 145 145 (*) 120 (**)
Maximum torque (EEC) (kgm) 8.9 14.8 14.8 (*) 12.2 (**)
corresponding engine speed (rpm) 3500 1900 2000 (*) 1750 (**)
Spark plugs NGK LKR7DI-12 NGK LKR9EI-8 NGK ILKR9G8
Fuel
95 RON unleaded petrol
(EN228 specifications)95 RON unleaded petrol
(EN228 specifications)
(*) SPORT mode
(**) NORMAL mode

TECHNICAL DATA
168
GENERAL0.9TwinAir 60 HP (*)0.9TwinAir 80 HP (*)
Engine code 312A6000 312A5000
Cycle Otto Otto
Number of cylinders and position 2 straight 2 straight
Piston diameter and stroke (mm) 83.5 x 88 83.5 x 88
Total capacity (cm3
) 964 875
Compression ratio 11.1 : 1 10 ± 02 : 1
Maximum power (EEC) (kW) 44 59
Maximum power (EEC) (HP) 60 80
corresponding engine speed (rpm) 6250 5500
Maximum torque (EEC) (Nm) 88 145
Maximum torque (EEC) (kgm) 8.9 14.8
corresponding engine speed (rpm) 3500 1900
Spark plugs NGK T20182U NGK LKR9CI-8 oppure NGK PLKR9C8
Fuel
95 RON unleaded petrol
(EN228 specifications)95 RON unleaded petrol
(EN228 specifications)
(*) For versions/markets, where provided

169
GENERAL1.2 8V 69 HP LPG1.2 8V 69 HP1.2 8V 69 HP
EVO2 S&S 1.4 16V 100 HP (*)
Engine code 169A4000 169A4000 169A400 169A3000
Cycle Otto Otto Otto Otto
Number and position of cylinders 4 straight 4 straight 4 straight 4 straight
Piston diameter and stroke (mm) 70.8 x 78.86 70.8 x 78.86 70.8 x 78.86 72 x 84
Total capacity (cm3
) 1242 1242 1242 1368
Compression ratio 11.1 : 1 11.1 : 1 11.1 : 1 10.8 : 1
Maximum power (EEC) (kW) 51 51 51 73,5
Maximum power (EEC) (HP) 69 69 69 100
corresponding engine speed (rpm) 5500 5500 5500 6000
Maximum torque (EEC) (Nm) 102 102 102 131
Maximum torque (EEC) (kgm) 10.4 10.4 10.4 13.4
corresponding engine speed (rpm) 3000 3000 3000 4250
Spark plugs NGK ZKR7AI-8 NGK ZKR7A-10 NGK DCPR7EN-10 NGK DCPR7EN-10
Champion RA8MC x 4
Fuel LPG
95 RON
unleaded petrol
(EN228
specifications)95 RON
unleaded petrol
(EN228
specifications)95 RON
unleaded petrol
(EN228
specifications)
(*) For versions/markets, where provided

TECHNICAL DATA
170
GENERAL1.3 16V
Multijet 95 HP
EURO 51.3 16V
Multijet 95 HP
EURO 61.3 16V
Multijet 78 HP
EURO 6
Engine code 199B1000 312B1000 312B5000
Cycle Diesel Diesel Diesel
Number and position of cylinders 4 straight 4 straight 4 straight
Piston diameter and stroke (mm) 69.6 x 82 69.6 x 82 69.6 x 82
Total capacity (cm3
) 1248 1248 1248
Compression ratio 16.8 : 1 16.8 : 1 16.8 : 1
Maximum power (EEC) (kW) 70 70 57.3
Maximum power (EEC) (HP) 95 95 78
corresponding engine speed (rpm) 4000 4000 3750
Maximum torque (EEC) (Nm) 200 200 200
Maximum torque (EEC) (kgm) 20.4 20.4 20.4
Corresponding engine speed (rpm) 1500 1500 1500
Fuel
Diesel for motor
vehicles
(EN590 specifications)Diesel for motor
vehicles
(EN590 specifications)Diesel for
motor vehicles
(EN590 specifications)
(*) For versions/markets, where provided

TECHNICAL DATA
180
CAPACITIES21) 38) 11) 22) 3)
Fuel tank (litres): 35 35 35 35
Including a reserve of (litres): 5 5 5 5
Engine cooling system 4.85/
(litres): 5.2 5.3 5.2 4.4
Engine sump (litres): 2.8  2.8  2.5  2.75 
Engine sump and filter (litres): 3.2  3.2  2.8  2.90 
Gearbox/differential casing (litres): 1.65 1.65 1.65 1.65
Dualogic gearbox hydraulic
activation system (litres/kg): – 0.7/0.59 0.7/0.59 0.7/0.59

Hydraulic brake circuit (kg): 0.55 0.55 0.55 0.55
Hydraulic clutch controls
(RH drive versions): – – 0.100 0.100
Windscreen and rear window
washer fluid reservoir (litres): 2.5 2.5 2.5 2.5
* For versions/markets, where provided
** When the vehicle is used in particularly harsh weather conditions, we recommend using a 60% mixture of PARAFLUUPand 40% of
demineralised water.
LPG versions
Petrol versions
0.9
TwinAir
60 HP
*65 HP
0.9
TwinAir
80 HP
*85 HP
105 HP
1.2 8V
69 HP1.4 16V
100 HP*Prescribed fuels and
original lubricants
Unleaded petrol with R.O.N.
no lower than 95 (EN 228 specifications)
Mixture of distilled water and
PARAFLU
UPat 50% (**)
SELENIA K P.E.

SELENIA DIGITEK P.E. SELENIA MULTIPOWER GAS 5W-40 
TUTELA GEAR FORCE
TUTELA CS SPEED
Special oil with
“ATF DEXRON III” type additive
TUTELA TOP 4 or TUTELA TOP 4/S
Mixture of water and
PETRONAS DURANCE SC35

181
Fuel tank (litres): 35 35
Including a reserve of (litres): 5 5
Engine cooling system
(litres): 6.3 6.3
Engine sump (litres): 2.8 3.7
Engine sump and filter (litres): 3.0 3.9
Gearbox
casing/differential: 1.55 (kg) 1.55 (kg)
Hydraulic brake circuit (kg): 0.55 0.55
Hydraulic clutch controls
(RH drive versions): – –
Hydraulic clutch controls
(RH drive versions): 2.5 2.5
When the vehicle is used in particularly harsh weather conditions, we recommend using a 60% mixture of PARAFLUUPand 40% of
demineralised water.
Diesel versions1.3 16V Multijet
95 HP EURO 51.3 16V 78 HP / 95 HP
EURO 6Prescribed fuels and
original lubricants
Diesel for motor vehicles (EN590
specifications)
Mixture of distilled water and
PARAFLU
UPat 50% 
SELENIA WR P.E.
TUTELA TRANSMISSION GEARFORCE
TUTELA TOP 4 or TUTELA TOP 4/S
Mixture of water and
PETRONAS DURANCE SC35
Maximum refuelling capacity (including reserve): 30.5 litres of LPG
The figure already takes into account the 80% tank filling limit and the residual fluid required for priming; this figure
represents the maximum permitted capacity. There may be slight variations to this figure as a result of:
differences between the network pump supply pressures, pumps having different supply/locking features,
tank not completely run out of fuel.
LPG versions

TECHNICAL DATA
182
Replacement
frequency
FLUIDS AND LUBRICANTS 39) 22) 3)
Your vehicle is equipped with an engine oil that has been thoroughly developed and tested in order to meet the requirements
of the Scheduled Servicing Plan. Constant use of the prescribed lubricants guarantees the fuel consumption and emission
specifications. Lubricant quality is crucial for engine operation and duration.
If lubricants conforming to the specific request are not available, products that meet the indicated specifications can be used
to top up; in this case optimal performance of the engine is not guaranteed.
PRODUCT SPECIFICATIONS
Lubricants for petrol
engines
(versioni 1.2 8v e 1.4 16V)
Lubricants for
petrol engines
(TwinAir versions only)
Lubricants for
Euro 5 diesel engines
Lubricants for
Euro 6 diesel engines
Lubricant for
petrol/LPG engines
Protective agent for
radiators
9.55535-S2
specifications
9.55535-GS1
9.55535-S1
9.55535-DSI or
MS.90047
9.55535-T2
9.55523 or MS.90032SELENIA K P.E.
Contractual Technical
Reference No. F603.C07
SELENIA DIGITEK P.E.
Contractual Technical
Reference No. F020.B12
SELENIA WR P.E.
Contractual Technical
Reference No. F510.D07
SELENIA WR FORWARD
Contractual Technical
Reference No. F842.F13
SELENIA MULTIPOWER
GAS 5W-40
Contractual Technical
Reference No. F922.E09
PARAFLU
UPContractual Technical
Reference No. F101.M01According to Scheduled
Servicing Plan
According to Scheduled
Servicing Plan
According to Scheduled
Servicing Plan
According to Scheduled
Servicing Plan
According to Scheduled
Servicing Plan
Cooling circuits proportions
of use:
50% demineralised water
50% PARAFLU
UP
UseFeaturesSpecificationsGenuine fluids and
lubricants
SAE 5W-40
ACEA C3 / API SN.
SAE 0W-30
ACEA C2 / API SN.
SAE 5W-30 ACEA C2.
SAE 0W-30 ACEA C2.
SAE 5W-40
ACEA C3 / API SN.
Protective agent with antifreeze
action with organic formulation.
CUNA NC 956-16,
ASTM D 3306.
IMPORTANT Do not top up or mix with other fluids which have different specifications from those described.When the vehicle is used in particularly harsh weather conditions, we recommend using a 60% mixture of PARAFLUUPand 40% of demineralised water.

183
Brake fluid
Diesel additive
Windscreen/rear
window washer
fluid
Applications
TUTELA TRANSMISSION
GEARFORCE
Contractual Technical
Reference No. F002.F10
TUTELA CS SPEED
Contractual Technical
Reference No. F005.F98
TUTELA ALL STAR
Contractual Technical
Reference No. F702.G07
TUTELA STAR 700
Contractual Technical
Reference No. F701.C07
TUTELA STAR 325
Contractual Technical
Reference No. F301.D03
TUTELA TOP 4
Contractual Technical
Reference N° F001.A93
or
TUTELA TOP 4/S
Contractual Technical
Reference N° F005.F15
TUTELA DIESEL ART Contractual
Technical Reference No. F601.L06
PETRONAS DURANCE SC 35
Contractual Technical
ReferenceNo. F001.D16Mechanical gearbox
and differential
Hydraulic actuation
system lubricant
Dualogic gearbox
Wheel side HP joints
Differential side HP joints
(excluding 1.4 16V
100 HP versions)
Differential side HP joints
(1.4 16V 100
HP versions)
Hydraulic brakes and
hydraulic clutch controls
To be mixed with diesel
25 cc per 10 litres
To be used diluted or
undiluted in windscreen
washer/wiper systems
UseFeaturesSpecificationsGenuine fluids and
lubricants
Oils and greases
for drivelineSAE 75W API GL4
grade synthetic lubricant
Specific fluid for electro-hydraulic
actuators
“ATF DEXRON III” type oil
Molybdenum disulphide grease,
for use at high temperatures.
N.L.G.I. consistency 1-2
Grease for constant velocity joints
with low friction coefficient.
N.L.G.I. consistency 0-1
Polyurea synthetic-based grease
suitable for high temperatures.
NL.G.I. consistency 2
Synthetic fluid for brake and clutch
systems. Exceeds specifications
F.M.V.S.S. no. 116 DOT 4,
ISO 4925 SAE J1704
Antifreeze additive for diesel,
with protective action for diesel engines
Mixture of alcohol, water and
surfactants CUNA NC 956-II9.55550-MZ6
9.55550-SA1
9.55580-GRAS II
9.55580-GRAS II
9.55580-GRAS II
9.55597
or
MS.90039
–
9.55522
or
MS.90043

PERSONAL SAFETY
187
IMPORTANT INFORMATION AND
RECOMMENDATIONS
3) ADJUSTMENTS
Any and all adjustments to seats, head restraints, steering wheel or
rear view mirrors must be performed exclusively with the
vehicle stationary and the engine off.
4) SEATS
•If a side bag is fitted, it is dangerous to use
seat covers not available from Lineaccessori MOPAR
®.
•Once you have released the adjustment lever, always check that
the seat is locked on the guides by trying to move it back and
forth. If the seat is not locked into place, it may unexpectedly slide
and cause the driver to lose control of the car.
5) HEAD RESTRAINTS
• All adjustments must be carried out only with the car stationary
and engine off. The head restraints should be adjusted to support
the back of your head and not your neck. Only in this position do
they exert their protective action.
• To make the best use of the protective action of the head
restraints, adjust the backrest so that you are sitting upright and
keep your head as close as possible to the head restraint.
6) REAR VIEW MIRRORS
As door mirrors are curved, they may slightly alter the perception
of distance. When driving, these mirrors must always be in the
open position.
We recommend you carefully read the following environmental information.
In an emergency we recommend that you call the toll-free phone number found in the Warranty Booklet.
Go to the www.fiat500.com website to locate the Fiat Dealership closest to you.
(CONTINUES)
1) THE KEYS
Press button B fig. 9 only with the key away from your body,
especially your eyes and from objects which could get damaged
(e.g. your clothes).
Do not leave the key unattended to avoid the button being
accidentally pressed while it is being handled, e.g. by a child.
2) STARTING DEVICE
• Never remove the key while the car is moving.
The steering wheel will automatically lock as soon as it is turned.
This holds true for cars being towed as well.
• It is absolutely forbidden to carry out any after-market operation
involving steering system or steering column modifications
(e.g. installation of anti-theft device) that could adversely affect
performance and safety, invalidate the warranty and also result in
non-compliance of the vehicle with type-approval requirements.
•If the ignition device has been tampered with
(e.g. an attempted theft), have it checked over by a Fiat
Dealership before driving again.
•Always remove the key when you leave your car to prevent
someone from accidentally operating the controls.
Remember to engage the handbrake.
If the car is parked on a slope uphill, engage the first gear; if the
car is facing downhill, engage the reverse gear. Never leave
children unattended in the vehicle.