manual radio set FIAT 500 2018 Owner handbook (in English)

KNOWING YOUR CAR
72
Switching the
system on/off
The system is switched on/off by
pressing the g(ON/OFF) button/knob.
Turn the button/knob clockwise to
increase the radio volume or
anticlockwise to decrease it.
Radio mode
After the desired radio station is
selected, the following information is
shown on the display:
At the top: the list of radio stations
stored (presets) is displayed; the station
currently playing is highlighted.
In the middle: display of the name of
the current radio station and the
buttons for selecting the previous or
next radio station.
At the bottom: display of the following
buttons:
❒ “Browse”: list of the radio stations
available;
❒ “AM/FM”, “AM/DAB”, “FM/DAB”:
selection of the desired frequency
band (button reconfigurable
according to the band selected:
AM, FM or DAB);❒ “Tune”: manual radio station tuning
(not available for DAB radio);
❒ “Info”: additional information on the
source being listened to;
❒ “Audio”: access to the “Audio
setting” screen.
Audio menu
The following adjustments can be
carried out using the “Audio” menu:
❒ “Equalizer” (for versions/markets,
where provided);
❒ “Balance” (left/right audio balance
adjustment);
❒ “Volume / Speed” (speed-
dependent automatic volume
control);
❒ “Loudness” (for versions/markets,
where provided);
❒ “Auto-On Radio”;
❒ “Radio Off Delay”.
To exit the “Audio” menu, press the
/ Done graphic button.
Media mode
Audio source selection
Press the "Source" button to select the
desired audio source among those
available: AUX (where provided), USB
or Bluetooth®.
NOTE Applications used on portable
devices may be not compatible with
the Uconnect™ system.
Track selection (Browse)
With Media mode active, briefly press
the
”/ »graphic buttons to play
the previous/next track or keep the
”/ »buttons pressed to fast
rewind/forward the track.
NOTE The keyboard is not available for
languages not supported by the
system which feature special
characters (e.g. Greek). In these cases
this function will be limited.

KNOWING YOUR CAR
88
Switching the
system on/off
The system is switched on/off by
pressing the gbutton/knob.
Turn the button/knob clockwise to
increase the radio volume or
anticlockwise to decrease it. The
electronic volume adjustment control
rotates continuously (360°) in both
directions, without stop positions.
Radio mode
After the desired radio station is
selected, the following information is
shown on the display:
At the top: the list of radio stations
stored (presets) is displayed; the
station currently playing is highlighted.
In the middle: display of the name of
the current radio station and the
buttons for selecting the previous or
next radio station.
On the left: display of the “AM”, “FM”,
“DAB” buttons for selecting the desired
frequency band (reconfigurable button
depending on the selected band: AM,
FM or DAB);On the right : display of the following
buttons:
❒ “Info”: additional information on the
source being listened to;
❒ “Map”: navigation map view
(Uconnect™ 7” HD
Nav LIVEversions only).
At the bottom: display of the following
buttons:
❒ “Browse”: list of the radio stations
available;
❒
÷/ ˜: selection of the
previous/next radio station;
❒ “Tune”: manual radio station tuning;
❒ “Audio”: access to the
❒ “Audio Settings” screen.
Audio menu
To access the “Audio” menu press the
“Audio” button located at the bottom
of the display. The following adjustments can be
carried out using the “Audio” menu:
❒ “Balance & Fader” (left/right and
front/rear audio balance
adjustment);
❒ “Equalizer” (where provided);
❒ “Speed Adj Volume” (speed-
dependent automatic volume
control);
❒ “Loudness” (where provided);
❒ “AUX Volume Offset”
(where provided) (off in radio mode,
selectable only with the AUX
source active);
❒ “AutoPlay”;
❒ “Auto-On Radio”.
Media mode
Press the "Media" button to select the
desired audio source among those
available: USB, Bluetooth®, AUX
(where provided).
IMPORTANT Applications used on
portable devices may be not
compatible with the Uconnect™
system.
After Media mode is selected, the
following information is shown on the
display: