light FIAT BARCHETTA 2003 1.G Workshop Manual

93
2)Remove the bulb holder B, ro-
tating it slightly to uncouple it.
3)Pull out bulb C, change it and
press fit the bulb holder back into po-
sition.IF AN EXTERIOR
LIGHT BURNS
OUT
FRONT SIDE LIGHTS fig. 11
To change the 12V-5W bulb:
1)Remove the protective cap by
pulling tab Adownwards.DIPPED HEADLIGHTS
To change the halogen bulbs (H1
type, 12V-55W):
1)Remove the protective cap by
pulling tab A-fig. 12 downwards.
2) Unhook retaining springlet A-
fig. 13and pull bulb Bout.
3) Fit the new bulb making the fins
of the metal part coincide with the
special grooves in the headlight dish
and rehook the retention springlet.
fig. 11
P5S00713m
fig. 12
P5S00716m
fig. 13
P5S00717m

94
FULL BEAM HEADLIGHTS
To change the halogen bulbs (H1
type, 12V-55W):
1) Remove the protective cap by
pulling tab A-fig. 14downwards.
2)Unhook retaining springlet A-
fig. 15, pull bulb Bout and replace it.
3) Fit the new bulb making the fins
of the metal part coincide with the
special grooves in the headlight dish
and rehook the retention springlet.FRONT FOGLIGHTS fig. 16
To replace the fog light lamps (type
H3, 12V-55W) it is necessary to op-
erate from below the car. It is hence
suggested to have the lamps replaced
by Fiat Dealership.FRONT DIRECTION
INDICATORS
To replace front turn indicator lamps
it is necessary to operate from below
the car. It is hence suggested to have
the lamps replaced by Fiat Dealer-
ship.
fig. 15
P5S00714m
fig. 14
P5S00715m
fig. 16
P5S00718m
fig. 17
P5S00697m
The incorrect setting of the
fog light headlights reduces
their effectiveness and it can be of
disturbance to the other car drivers.
In the case of necessity please con-
tact Fiat Dealership for an inspec-
tion and possible adjustment.
WARNING

95
DIRECTION REPEATERS fig. 18
To change the 12V-5W bulb:
1) Remove press-fit lens A, com-
plete with bulb holder and rubber pro-
tection.
2) Pull back the rubber protection
and remove the bulb holder from the
lens assembly.3) Remove bulb Bby pressing it in
slightly and turning it in an anti-clock-
wise direction.
4) Replace the bulb.
5)Fit the lens on the bulb holder un-
til you hear it click into place, then
reposition the rubber protection.
6) Then fit the whole assembly into
the housing in the bodywork, turning
it slightly to aid installation.REAR DIRECTION
INDICATORS fig. 19
To change the 12V-21W bulb:
1)Unscrew knob Aand remove the
cover.
2) Turn bulb-holder Bin an anti-
clockwise direction and remove it.
3)Remove bulb Cby pressing it in
slightly and turning it in an anti-clock-
wise direction.
fig. 18
P5S00698m
fig. 19
P5S00699m

96
TAIL- AND STOP LIGHTS
fig. 20
To change the 12V-5/21W bulb:
1) Unscrew knob Aand remove the
cover.
2) Turn bulb holder Bin an anti-
clockwise direction and remove it.
3) Remove bulb Cby pressing it in
slightly and turning it in an anti-clock-
wise direction.THIRD BRAKE LIGHT
Proceed as follows to replace a
12V-P21W bulb:
1) Open the tailgate.
2) Loosen the two screws A-fig. 21
fastening the internal cover.3) Turn the bulb holder B-fig. 22
anticlockwise by approximately 1/4
of a turn.
4) Pull out the bayonet fitted bulb C.
5) Refit by reversing the removal
sequence.
fig. 20
P5S00700m
fig. 22
P5S10030m
fig. 21
P5S10029m

97
REVERSING LIGHTS fig. 23
To change the 12V-21W bulb:
1)Undo screw Asecuring the lens
assembly.
2) Turn bulb holder Bin an anti-
clockwise direction and remove it.
3)Remove the bulb by pressing it in
slightly and turning it in an anti-clock-
wise direction.
4) When refitting the lens assembly,
first insert tab Cin its slot in the body
work and then fix it in place with
screw A.REAR FOGLIGHTS fig. 24
1)Undo screw Asecuring the lens
assembly.
2)Turn bulb holder Bin an anti-
clockwise direction and remove it.
3)Remove the bulb by pressing it in
slightly and turning it in an anti-clock-
wise direction.
4)When refitting the lens assembly,
first insert tab Cin its seat in the body
work and then fix it in place with
screw A.NUMBER PLATE LIGHTS fig. 25
To change the 12V-5W bulb
1) Undo screw Asecuring the lens
assembly.
2) Pull up lens weather-stripping B
and remove press-fit bulb C.
fig. 23
P5S00701m
fig. 24
P5S00702m
fig. 25
P5S00703m

98
IF AN INTERIOR
LIGHT BURNS
OUT
CEILING LIGHT UNIT
To change 12V-10W tubular bulb A:
pry off the ceiling light unit with a
screwdriver at the points indicated in
fig. 26.GLOVE COMPARTMENT
LIGHT fig. 27
To replace the tubular 12V-5W bulb:
remove the lens by pressing it on its
two short sides and pulling it down-
wards.
IF A FUSE
BLOWS
GENERAL fig. 28
If an electrical device is not working,
check whether the respective fuse is
blown. The conductor Cshould not
be broken. If it is, replace it with an-
other with the same amperage (same
colour).
A- Undamaged fuse
B- Fuse with broken filament.
fig. 26
P5S00689m
fig. 27
P5S00704m
fig. 28
P5S00742m

101
FUSE LIST
Exterior lights
13-fig. 30
6-fig. 30
7-fig. 30
7-fig. 30
6-fig. 30
4-fig. 30
8-fig. 30
1-fig. 30
2-fig. 30
fig. 31
5-fig. 33
3-fig. 30
13-fig. 30
14-fig. 30
13-fig. 30
13-fig. 30
6-fig. 30
7-fig. 30 15
10
10
10
10
10
10
10
10
20
40
10
15
10
15
15
10
10
Protected device Ampere Fuse number - Location
Direction indicators
Front right-hand side light
Front left-hand side light
Right-hand taillight
Left-hand taillight
Right-hand dipped beam headlight
Left-hand dipped beam headlight
Right-hand main beam headlight
Left-hand main beam headlight
Fog light
Fog light
Rear fog light
Reverse light
Hazard lights
Brake lights
Third brake light
Right-hand number plate light
Left-hand number plate light

102
15
10
40
10
10
20
15
10
50
10
10
10
30
10
15
10
10
10
Interior lights
Protected device Ampere Fuse number - Location
Ceiling light
Glove compartment light
Glove compartment light
Side/taillight warning light
Main beam headlight warning light
Fog light warning light
Direction indicator warning light
Hazard light warning light
Rear fog light warning light
Instrument panel light
Digital clock light
Cigar lighter light
Window winder light
Fog light/rear fog light switch light
Hazard light control light
Heater control light
Manual climate control system light
Electric mirror control light 12-fig. 30
14-fig. 30
5-fig. 33
6-fig. 30
2-fig. 30
fig. 31
13-fig. 30
14-fig. 30
6-fig. 33
6-fig. 30
6-fig. 30
6-fig. 30
fig. 31
6-fig. 30
13-fig. 30
7-fig. 30
7-fig. 30
6-fig. 30

104
15
15
15
10
15
30
15
20
20
40
20
20
15
15
7.5
7.5
15
7.5
60
7.5
7.5
15
60
7.5
–
Protected device Ampere Fuse - number - Location
Instrument panel power
Digital clock power
Cigar lighter power
Hazard light repeater power
Hazard light repeater power
Window winder control unit power
Door locking receiver power
Door locking control unit power
Manual climate control system control unit power
Supplementary headlight relay power
Radiator fan relay
Manual climate control system compressor relay
Climate control system compressor relay energy
Phase variator solenoid valve
Radiator fan relay energy
Fuel pump relay energy
Lambda sensor
Cylinder position sensor
Interconnection control unit
Injection control unit
Injection control unit
Window winder control unit
Electronic alarm control unit
Fiat CODE control unit
Spare13-fig. 30
12-fig. 30
12-fig. 30
14-fig. 30
13-fig. 30
fig. 31
12-fig. 30
fig. 31
9-fig. 30
5-fig. 33
9-fig. 30
9-fig. 30
fig. 34
fig. 34
fig. 34
fig. 34
fig. 34
fig 34
1-fig. 33
fig. 34
fig. 34
13-fig. 30
1-fig. 33
fig. 34
15-fig. 30

109
IF AN ACCIDENT
OCCOURS
– It is important to keep calm.
– If you are not directly involved in
the accident stop at least ten metres
away from the accident.
– If you are on a motorway, do not
obstructing the emergency lane with
your car.
– Turn off the engine and turn on the
hazard lights.
– At night, illuminate the scene of the
accident with your headlights.
– Act carefully, you must not risk be-
ing run over.
– Mark the accident by putting the
red triangle at the prescribed distance
from the car where it can be clearly
seen.
– Call for rescue making the infor-
mation you give as accurate as you
can. On the motorway, use one of the
special column-mounted emergency
phones.– In pile-ups on the motorway, par-
ticularly when the visibility is bad,
there is a high risk of other vehicles
running into those already immobile.
Get out of the vehicle immediately and
take refuge behind the guard rail.
– Remove the ignition keys of the ve-
hicles involved.
– If you can smell petrol or other
chemicals, do not smoke and make
sure all cigarettes are extinguished.
– Use a fire extinguisher, blanket,
sand or earth to put out fires no mat-
ter how small they are. Never use wa-
ter.IF ANYONE IS INJURED
– Never leave the injured person
alone. The obligation to provide as-
sistance exists even for those not di-
rectly involved in the accident.
– Do not congregate around the in-
jured person.
– Reassure the injured person that
help is on its way and will arrive soon.
Stay close by to calm him/her down
should they panic.
– Unfasten or cut seat belts holding
injured parties.
– Do not give an injured person any-
thing to drink.
– Never move an injured person ex-
cept in the following cases.
– Pull the injured person from the
car only if it risks catching fire, is sink-
ing in water, is likely to fall from a
height or similar. Do not pull his/her
arms or legs, do not bend the head
and, as far as possible, keep the body
flat.