wiring diagram FIAT BARCHETTA 2003 1.G Owners Manual
[x] Cancel search | Manufacturer: FIAT, Model Year: 2003, Model line: BARCHETTA, Model: FIAT BARCHETTA 2003 1.GPages: 170, PDF Size: 3.55 MB
Page 64 of 170
63
CELLULAR PHONE SETUP
(where fitted)
Your vehicle may be equipped with
an optional cellular phone system con-
sisting of:
– a dual function speaker (sound sys-
tem and cellular phone) located under
the dashboard on the right-hand side;– a dual function, electrically-oper-
ated aerial (sound system and cellular
phone) A-fig. 78located in the rear
right-hand part of the vehicle;
– wiring and ten-pin connector A-
fig. 79(to power and connect to the
dual function speaker) and connection
to dual function aerial Blocated in the
front part of the central tunnel. To ac-
cess the components, remove the
screws and flap C.The wiring diagram is:
Nelectronic earth
Rpositive (+30) protected by
15A fuse no. 10 (in fuse car-
rier)
GNlight positive (+), protected
by 10A fuse no. 2 (in fuse car-
rier)
ARkey positive (+), protected by
15A fuse no. 1 (in fuse carri-
er)
LNdual function speaker on
right-hand door (–)
BRdual function speaker on
right-hand door (+)
fig. 78
P5S10003m
fig. 79
P5S10038m
Page 151 of 170
150
ELECTRONIC ALARM
WIRING DIAGRAM AND
ADDITIONAL BRANCHES fig. 1
1- Right indicator/hazard lights
branch
fig. 1
P5S00726m
2- Passenger compartment sensor
3- Front right ground
4- Diagnostic socket5- Optional device protection fuse-
box
6- Radio-frequency receiver
7- “Electronic alarm on” led
8- Electronic alarm control unit
9- Bonnet switch
10- Boot switch
11- Ignition switch powering
12- Right door switch
13- Left door switch
14- Indicator light 15A fuse and
branch unit
15 - Left indicator/hazard lights
branch.