change time FIAT CROMA 2009 2.G Blue And Me Instant Navigation Manual

23
BLUE&ME
™
in conjunction with Instant Nav
CONTROLS ON THE STEERING
WHEEL
The controls on the steering wheel (see
fig.1) are designed to use the hands free
function, activate the voice recognition,
the multimedia player functions or to se-
lect an option from the system Menu.
Other controls have different functions
depending on the system status at any giv-
en moment.
The function selected in response to
pressing a button in some cases depends
on how long the button is pressed (long
or short press).
DISPLAY AND CONTROLS ON
THE STEERING WHEEL.
Note
The instructions for using the system via
the manual controls are shown by the
symbol
?.INSTANT NAV CONTROLS
The
N/O/¯/˙butttons that activate
the Media Player mode are on the front of
the Instant Nav:
NOSelection of previous/next fold-
er/artist/genre/album depending on
the selection mode activated
¯˙Play previous/ next trackVOICE COMMANDS
It is possible to use voice commands
without the need to change your normal
driving position to be recognized by the
system. The microphone is in the correct
position for this purpose.
The words that are recognized by the
system are identified as “voice com-
mands”.
The hands free system recognizes and
responds to a predefined list of voice com-
mands. The list of available voice com-
mands depends on where you are in the
hands free system menu. The list of voice
commands available at any time can always
be accessed by pressing
‘and saying
“Help” or by saying “Help” after a system
message. The system also recognizes per-
sonalized voice command versions, such
as, for example, the names in your phone
list.
U U
S S
I I
N N
G G

T T
H H
E E

S S
Y Y
S S
T T
E E
M M
603_97_160 CROMA_BLUE INSTANT NAV_GB_1ed 5-05-2009 15:51 Pagina 23

24
BLUE&ME
™
in conjunction with Instant Nav
To use the voice commands with this
hands free system there is no need for any
learning stage for the system with your
voice.
To give the system a voice command,
press
‘and wait for the acoustic signal
that indicates that the voice recognition
system is activated; you can now give the
command in your normal voice, not too
quickly but without a break. When the
system recognizes the command, it will re-
spond or carry out an action.
The voice commands are organized in
three levels: 1
stlevel, 2ndlevel and 3rdlev-
el.
When a 1
stlevel valid* voice command is
given, the system is prepared to recognize
2
ndlevel voice commands; when a 2ndlev-
el voice command is given, the system is
activated to recognize 3
rdlevel voice com-
mands.
If the user gives a valid * 1
stlevel voice
command, the submenu for that command
remains activated until a voice command
that leads to another level is given or the
interaction is interrupted; the same rule is
valid for the lower levels (2 and 3).
For a list of all the available voice com-
mands, refer to the LIST OF AVAILABLE
VOICE COMMANDS chapter.
To listen to the last message given by the
system again, press
‘for more than 1
second or press
‘for a short while and
say “Repeat”.
The hands free system can provide in-
formation vocally.
A voice announcement is a voice mes-
sage proposed directly by the system. To
end a voice announcement, press ESCor
press
‘and say “Cancel”.
A voice interaction is an exchange of
communications/commands between the
hands free system and the user. To start
a voice interaction, press
‘and make a
command. To interrupt an interaction and
start a new interaction, press
‘at any
time during the interaction and give a
voice command.
To end an interaction, press ESC. You
will hear an acoustic signal that means that
the voice recognition has been deactivat-
ed.The help function can provide you, at any
time, with a list of commands available at
the level you are at. To use the help sys-
tem, say “Help”, listen to the list of com-
mands available and decide which com-
mand you want to give the system.
Adjust the volume to the level that is
best for you with the car moving. To
adjust the pre-set system volume, refer
to the description in the “EXTERNAL
AUDIO VOL function” paragraph in the
Instant Nav instruction manual. To tem-
porarily adjust the volume of the phone
call in profress, press +or –or adjust the
position of the Instant Nav control. The
volume will return to the original level at
the end of the call.
You can also press +of –to adjust the
volume of a voice announcement whilst
it is being given by the system.
Remember that to interrupt a voice an-
nouncement, you can press
‘at any time
during a voice interaction and give a new
voice command.
* Valid means that the voice command is part of the system vocabulary and therefore recognizable at a given level.
603_97_160 CROMA_BLUE INSTANT NAV_GB_1ed 5-05-2009 15:51 Pagina 24

25
BLUE&ME
™
in conjunction with Instant Nav
Notes
– The instructions for using the system
via the voice commands are shown by the
symbol
}.
– After having pressed
‘, if you do not
give a voice command within a few sec-
onds the system will ask you to give a
voice command. If you do not answer, the
voice recognition will be deactivated. This
also happens if you do not respond to a
question from the system. In such cases
you will hear an acoustic signal that means
that the voice recognition has been deac-
tivated.
– When the system does not manage to
recognize your voice command, it will give
you another chance to make a voice com-
mand. If you are not sure that the voice
command is correct, say “Help”. Use of voice recognition
The voice recognition system can some-
times make a mistake in recognizing a
voice command. To make sure that your
voice commands are always recognized,
stick to the following guide lines:
– After having pressed
‘, make the
voice command after the system has pro-
vided the acoustic signal that indicates that
the voice recognition is activated.
– After the system has asked a question,
wait for a second before giving the answer
to be sure that the voice recognition is ac-
tivated.
– If you want to make a command with-
out waiting for the system to finish its
message or question, you can press the
‘again briefly to interrupt the system
and give your command.
– Speak at a normal voice volume.
– Say the words clearly, not too quick-
ly but without a break.
– If possible, try and keep the noise in
the passenger compartment to a mini-
mum.– Before giving voice commands, ask
your companions not to talk. Since the
system recognizes words irrespective of
who is speaking, if several people are
speaking at the same time, the system
make recognize different words or addi-
tional words to those you have spoken.
– For optimum operation it is advisable
to close the sun roof if your car has one.
Notes
For countries where a mother tongue
version is not available, voice recognition
of commands and especially contacts in
the phone list may prove difficult. We ad-
vise adopting pronounciation that con-
forms to the language in the system.
To change the voice recognition lan-
guage, refer to a Fiat Dealership consult
the dedicated area in www.fiat.com.
603_97_160 CROMA_BLUE INSTANT NAV_GB_1ed 5-05-2009 15:51 Pagina 25

27
BLUE&ME
™
in conjunction with Instant Nav
AUDIO
The system audio function (hands free,
multimedia player, voice announcements,
acoustic signals) is played via the audio sys-
tem installed on your car. For this reason
any Instant Nav audio source activated is
interrupted for the time required.
The audio volume can always be adjust-
ed using the Instant Nav controls. SYSTEM FUNCTIONS MENU
The system Main Menu shows the op-
tions in a list which is shown on the con-
trol panel multifunction display. The sys-
tem settings can be changed or the func-
tions activated using the available options.
Note
The settings menu can only be navigated
using the controls on the steering wheel
when the car is stationary.The Main Menu includes the following
options:
– LAST CALLS. - a list of recent calls,
made or received, can be viewed through
this submenu. This list is downloaded from
your mobile phone memory, udated when
the hands free is used or it is obtained
from both operations.
– DIRECTORY - this submenu allows
you to see the telephone numbers in your
phone list and to select one to make a call.
If your phone list contains a lot of names,
they will be grouped in alphabetic sub-
menus. The number of people within a
submenu depends on the number of
names in your phone directory.
– SMS TEXT message reader (Function
only available with compatible mobile
phones). This submenu allows you to read
the last SMS text message received, call
the sender of the SMS text message or
delete the last SMS text message received.
Up to 20 SMS text messages can be stored
in a dedicated list and listened to later on,
the sender called or they can be deleted.
It is also possible to choose the way of re-
ceiving notification of SMS text messages
received.
603_97_160 CROMA_BLUE INSTANT NAV_GB_1ed 5-05-2009 15:51 Pagina 27

43
BLUE&ME
™
in conjunction with Instant Nav
Pause
To pause the track you are listening to:
Press ESCor the
&button at the front
of the Instant Nav.
Resume
To resume listening to a track that you
have paued: Press ESCor the
&button
at the front of the Instant Nav.
Next track
?To move on to the next track, using
manual interaction:
Whilst listening to a track press
N
(controls on the steering wheel) or ˙(Instant Nav controls).Previous track
?To return to the previous track
through manual interaction:
Whilst listening to a track press
O(controls on the steering wheel) or ¯(Instant Nav controls).
Note
If the command Previous track is given
after 3 seconds into the track, the track
will have to be listened to again. If, on the
other hand, the command is given within
the first 3 seconds of the start of the track,
the previous track will be played.Changing audio source
To change the audio source activated
(Radio, CD, Multimedia player), press OK
or the dedicated buttons RADIO, MEDIA
on the front of the Instant Nav.
Note
For further information on the voice
commands that can be used with the play-
er, see the LIST OF AVAILABLE VOICE
COMMANDS chapter.
603_97_160 CROMA_BLUE INSTANT NAV_GB_1ed 5-05-2009 15:52 Pagina 43

44
BLUE&ME
™
in conjunction with Instant Nav
MULTIMEDIA PLAYER
SETTINGS (Instant Nav only)
To enter the Multimedia Player settings
menu on the Instant Nav you can:
– Select the Audio function on the
Instant Nav Menu, confirm by pressing the
OK knot to enter the Media Player, press
the OK knob again to confirm the selec-
tion and turn to select the desired item.
or
– Select the Media Player source on
Instant Nav pressing the OKor MEDIA
buttons, press the MUSICbutton and
then press the OK button/knob to confirm
the selection and turn it to select the de-
sired item.Automatic play
The Automatic play function allows you
to set the Instant Nav so that the playing
of digital audio on your USB device starts
as soon as the ignition key is turned to the
MAR position. Once this function is
turned on, the first time you use the play-
er, playing will start automatically, do it be-
fore inserting the device in the USB port
on the car and create or update the mul-
timedia library.Note
If you change the setting of the Auto-
matic play after having connected a USB
device, the new setting will only be acti-
vated the first time you connect another
USB device (or the same USB device with
the updated musical tracks library).
603_97_160 CROMA_BLUE INSTANT NAV_GB_1ed 5-05-2009 15:52 Pagina 44

45
BLUE&ME
™
in conjunction with Instant Nav
Random play
The Random play function changes the
order in which the digital audio is played.
When the Random play function is acti-
vated the Instant Nav plays digital audio in
a random order.
Track repeat
When the Continuous play function is
turned on, a track is played repeatedly.
Note
If the Track repeat is on, the play previ-
ous track and next track functions will
move to the previous or next audio track
and start playing this track continuously.
For more information, see the de-
scription in the Instant Nav manual.SUGGESTIONS FOR THE USE
OF THE MULTIMEDIA PLAYER
Scrolling
– To improve scrolling within the
FOLDERS menu, organize the folders on
your USB device before connecting the
device to the system. To facilitate and im-
prove the selection in the FOLDERS
menu, organize your music tracks in fold-
ers that have names that mean something
to you.Organizing multimedia files
– To produce categories that mean
something on the system, the information
in the multimedia files must be updated.
To update the information for each file,
follow the instructions in your software
support documentation for managing mul-
timedia files.
– If your library contains items with in-
formation relating to the Artist, Album,
Title or Genre, the system will display
UNKNOWN in the ALBUM and GENRE
menus. To insert information on a ditital
audio file, follow the instructions in your
software support documentation for man-
aging multimedia files.
– To improve listening to your favourite
music, we suggest creating specific playlists
(see “Creating playlists” in this chapter).
603_97_160 CROMA_BLUE INSTANT NAV_GB_1ed 5-05-2009 15:52 Pagina 45

54
BLUE&ME
™
in conjunction with Instant Nav
Changing the GPRS connection
code
If the mobile phone service provider re-
quires the setting for the GPRS connec-
tion to be changed, you can do this in the
ADVANCED OPTIONS menu.
?To change the GPRS connection code,
using manual interaction:
Move to the GPRS CODE menu and
press OKor
ß.
GPRS should appear on the display
with a list of digits (1, 2, 3, 4, 5, 6, 7,
8, 9), PREDEF. and DISABLE. To se-
lect a new code for the GPRS con-
nection, press
QorZuntil the de-
sired option appears, then press OK
or
ß. To choose to keep the prede-
fined value, select Predef. To disable
the connection code, select DISABLE
After having reset the GPRS connec-
tion code, the system will display the
message CODE SET.
}To set the GPRS connection code, us-
ing voice commands:
Press
‘and say “Settings” and then
“Connection code”.
The system will reply with the current
GPRS connection code and the cur-
rent value. To change it, say a num-
ber from 1 to 9 or say “Predefined”.
To disable it, say “Disable”. To change
the code, say a number from 1 to 9 or
say “Predefined”. To disable the code,
say “Disable”. (In the previous sen-
tence, the current value is the value
set for the GPRS connection code at
the time it is used).
After having set the new connection
code, the system will reply with “The
connection code is at the new value”
(In the previous sentence the new val-
ue is the value set for the GPRS con-
nection). EXIT FROM MENU SETTINGS
It is possible to exit the settings menu at
the end operation as described below.
?To exit the Settings menu, using man-
ual interaction:
Select the option EXIT and then press
OKor
ß.
}Or, through voice commands:
Press
‘and say “Exit”.
603_97_160 CROMA_BLUE INSTANT NAV_GB_1ed 5-05-2009 15:52 Pagina 54

76
BLUE&ME
™
in conjunction with Instant Nav
Problem Probable Cause Possible Solution
Indication on the display:
NO LIST or the system says:
“No playlist found”
Indication on the display:
INCORRECT LIST
Indication on the display:
PLAYLIST EMPTY or the
system says:
“PLAYLIST EMPTY.”
Indication on the display:INCORRECT FILE
Indication on the
Instant Nav display:
MEDIAPLAYER if there
is no USB device connected
to the USB port in the car
Create a playlist on your computer using your application
software for the management of multimedia files and add
it to your USB device
– Make sure that the playlist is in .m3u or .wplformat.
– Create the playlist again following the instructions in the
CREATING A PLAYLIST FOR THE SYSTEM chapter un-
der SUGGESTIONS.
– If the problem persists, delete the playlist from your USB
device.
– Delete the playlist from your USB device or insert the
multimedia files in the playlist, using your software for
the management of multimedia files.
– You can reduce the number of songs in the playlist,
using your multimedia file management software.
If the digital audio is spoilt, delete it from your USB device
– Press the OK button or the dedicated FM, AM buttons at
the front of the Instant Navto change the audio source.
– As long as the ignition key is in the MAR position insert
and then remove the USB device from the USB port in
the car.
– To prevent displaying MEDIAPLAYER if there is no USB
device, we suggest you always extract the device with the
ignition key in the MARposition, or you stop playing
(with the voice command STOP) before removing the
USB device from the USB port in the car. You have tried to play a playlist, but
there are no playlists on the USB device
connected
The playlist is spoilt or not valid
– The playlist does not contain
multimedia files
– The .wplfile is too large for the system
memory
– The playlist does not contain
multimedia file references that are
found on your USB device
The digital audio is spoilt or not valid
The USB device has been removed
from the USB port in the car with the
ignition key in the STOP position
603_97_160 CROMA_BLUE INSTANT NAV_GB_1ed 5-05-2009 15:52 Pagina 76