Power FIAT DUCATO 244 2005 3.G Workshop Manual

226TECHNICAL SPECIFICATIONS
PERFORMANCE
Top speedsallowable after running in kph
Versions/engines 11-2.0 11-2.0 JTD 11-2.3 JTD 11-2.8 JTD 15-2.0 15-2.0 JTD
144 (*) 136 (*) 149 (*) 152 (*) 144 (*) 136 (*)
135 (**) 128 (**) 145 (**) 148 (**) 135 (**) 128 (**)
* All Van versions-According to the specific version
** All Truck versions
Versions/engines 15 15 15MAXIMAXI MAXI MAXI
2.3 JTD 2.8 JTD 2.8 JTD 2.0 2.3 JTD 2.8 JTD 2.8 JTD
POWER POWER
149 (*) 152 (*) 159 136 (*) 147 (*) 152 (*) 159
145 (**) 148 (**) 152 (❐)128 (**) 143 (**) 148 (**) 152 (❐)
* All Van versions-According to the specific version
** All Truck versions
(❐) If Camping Car tyres are fitted

228TECHNICAL SPECIFICATIONS
Weights (kg)
Version 15 (*)
Kerb weight
(including fuel,
spare wheel, tools
and accessories):
Payload including driver (1):
Maximum admitted
loads (2)
– front axle:
– rear axle:
– total:
Towable weight:
– trailer with brakes
– trailer without brakes
Maximum load on ball coupling
(trailer with brakes)
Maximum load on roof
(1) If special equipment is fitted (tow hitch, etc.), the unladen vehicle weight increases, thus reducing the specified payload.
(2) Loads not to be exceeded. The driver is responsible for arranging the loads so that they comply with these limits.
* The figures given refer to panelled and glazed vans with long, medium and short wheelbase, both high and low sided.2.0
1695 ÷ 1865
1435 ÷ 1510
1750
1850
3245 ÷ 3300
2000
750
80
1002.0 JTD
1755 ÷ 1840
1435 ÷ 1505
1750
1850
3300
1600
750
80
100
2.3 JTD
1725 ÷ 1995
1305 ÷ 1475
1750
1850
3300
2000
750
80
100
2.8 JTD
2.8 JTD POWER
1850 ÷ 2020
1280 ÷ 1450
1750
1850
3300
2000
750
80
100

229TECHNICAL SPECIFICATIONS
Weights (kg)
Version MAXI (*)
Kerb weight
(including fuel,
spare wheel, tools
and accessories):
Payload including driver (1):
Maximum admitted
loads (2)
– front axle:
– rear axle (3):
– total:
Towable weight:
– trailer with brakes
– trailer without brakes
Maximum load on ball coupling
(trailer with brakes)
Maximum load on roof
(1) If special equipment is fitted (tow hitch, etc.), the unladen vehicle weight increases, thus reducing the specified payload.
(2) Loads not to be exceeded. The driver is responsible for arranging the loads so that they comply with these limits.
(3) See “Cold tyre inflation pressure”.
* The figures given refer to panelled and glazed vans with long and medium wheelbase, both high and low sided.2.0
1765 ÷ 1915
1585 ÷ 1735
1850
2120
3500
2000
750
80
1002.3 JTD
1895 ÷ 2045
1455 ÷ 1605
1850
2120
3500
2000
750
80
100
2.8 JTD
2.8 JTD POWER
1935 ÷ 2070
1430 ÷ 1565
1850
2120
3500
2000
750
80
100

236TECHNICAL SPECIFICATIONS
Weights (kg)
Version 15
Kerb weight
(including fuel,
spare wheel, tools
and accessories):
Payload including driver (1):
Maximum admitted
loads (2)
– front axle:
– rear axle:
– total:
Towable weight:
– trailer with brakes
– trailer without brakes
Maximum load on ball coupling
(trailer with brakes)
(1) If special equipment is fitted (tow hitch, etc.), the unladen vehicle weight increases, thus reducing the specified payload.
(2) Loads not to be exceeded. The driver is responsible for arranging the loads so that they comply with these limits.2.0
1795
1505
1750
1850
3300
2000
750
802.0 JTD
1780 ÷ 1855
1375 ÷ 1445
1750
1850
3250 ÷ 3300
1600
750
802.3 JTD
1850 ÷ 1985
1315 ÷ 1415
1750
1850
3230 ÷ 3300
2000
750
80
2.8 JTD
2.8 JTD POWER
1875 ÷ 2010
1290 ÷ 1390
1750
1850
3260 ÷ 3300
2000
750
80

237TECHNICAL SPECIFICATIONS
Weights (kg)
Version MAXI
Kerb weight
(including fuel,
spare wheel, tools
and accessories):
Payload including driver (1):
Maximum admitted
loads (2)
– front axle:
– rear axle (3):
– total:
Towable weight:
– trailer with brakes
– trailer without brakes
Maximum load on ball coupling
(trailer with brakes)
(1) If special equipment is fitted (tow hitch, etc.), the unladen vehicle weight increases, thus reducing the specified payload.
(2) Loads not to be exceeded. The driver is responsible for arranging the loads so that they comply with these limits.
(3) See “Cold tyre inflation pressure”.2.0
1845
1655
1850
2120
3500
2000
750
802.3 JTD
1900 ÷ 2035
1465 ÷ 1600
1850
2120
3500
2000
750
80
2.8 JTD - 2.8 JTD POWER
1925 ÷ 2060
1440 ÷ 1575
1850
2120
3500
2000
750
80

238TECHNICAL SPECIFICATIONS
CREW CAB TRUCK WEIGHTS
Weights (kg)
Kerb weight (including fuel,
spare wheel, tools
and accessories):
Payload including driver (1):
Maximum admitted loads (2)
– front axle:
– rear axle:
– total:
Towable weight:
– trailer with brakes
– trailer without brakes
Maximum load on ball coupling
(trailer with brakes)
(1) If special equipment is fitted (tow hitch, etc.), the unladen vehicle weight increases, thus reducing the specified payload.
(2) Loads not to be exceeded. The driver is responsible for arranging the loads so that they comply with these limits.
(3) See “Cold tyre inflation pressure”.15
2.3 JTD
1990 ÷ 2055
970 ÷ 1310
1750
1850
3300
2000
750
8015
2.8 JTD
2015 ÷ 2080
945 ÷ 1285
1750
1850
3300
2000
750
80MAXI
2.0
1950
1250
1850
2120 (3)
3500
2000
750
80MAXI
2.3 JTD
2040 ÷ 2105
1120 ÷ 1460
1850
2120 (3)
3500
2000
750
80MAXI
2.8 JTD
2.8 JTD POWER
2065 ÷ 2130
1095 ÷ 1435
1850
2120 (3)
3500
2000
750
80

239TECHNICAL SPECIFICATIONS
CAPACITIES
Fuel tank:
including a reserve of:
Engine cooling system:
Engine sump:
Transaxle:
Hydraulic power steering:
Front and rear hydraulic brake circuit:
11-15 versions
MAXI versions
Hydraulic brake circuit
with ABS:
11-15 versions
MAXI versions
Windscreen and rear window
liquid reservoir:
(▲) For particularly cold temperatures use SELENIA PERFORMER MULTIPOWER SAE 5W-30.
Prescribed fuel
Recommended products
Premium unleaded petrol with
a RON not lower than 95
Mixture of distilled water and
PARAFLU 11(blue) at 50% or
PARAFLU UP(red) at 50%
SELENIA 20K (▲)
TUTELA CAR MATRYX
TUTELA GI/A
TUTELA TOP 4
TUTELA TOP 4
Mixture of water andTUTELA
PROFESSIONAL SC 35 2000 BZ
Litres
80
8 ÷ 10
9
5
2.4
1.3
0.59
0.62
0.62
0.66
4.2 kg
–
–
–
4.5
2.16
–
–
–
–
–
–

240TECHNICAL SPECIFICATIONS
Fuel tank:
including a reserve of:
Engine cooling
system:
Engine sump:
Engine sump and filter:
Transaxle:
Automatic gearbox
Hydraulic power steering:
Front and rear hydraulic
brake circuit:
11-15 versions
MAXI versions
Hydraulic brake circuit
with ABS:
11-15 versions
MAXI versions
Windscreen and rear window
liquid reservoir:2000 JTD 2300 JTD
Litres
80
8 ÷ 10
9
–
6.25
2.7
–
1.3
0.59
0.62
0.59
0.62
4.2Litres
80
8 ÷10
10
5.8
6.3
2.7
–
1.3
0.59
0.62
0.59
0.62
4.2 kg
–
–
–
5.6
2.43
–
–
–
–
–
–
–kg
–
–
5.2
5.7
2.43
–
–
–
–
–
–
–Litres
80
8 ÷10
10
5.0
5.7
2.7
8.2
1.3
0.59
0.62
0.59
0.62
4.2kg
–
–
4.5
5.1
2.43
–
–
–
–
–
–
–Prescribed fuel
Recommended products
Diesel fuel for motor vehicles
(EN590 specifications)
Mixture of distilled water and
PARAFLU 11(blue) at 50% or
PARAFLU UP(red) at 50%
SELENIA WR
TUTELA CAR MATRYX
TUTELA HP 20
TUTELA GI/A
TUTELA TOP 4
TUTELA TOP 4
Mixture of water and TUTELA
PROFESSIONAL SC 35 2800 JTD -
2800 JTD POWER

241TECHNICAL SPECIFICATIONS
FLUIDS AND LUBRICANTS
PRODUCTS WHICH MAY BE USED AND THEIR SPECIFICATIONS
Use
Lubricants
for petrol
engines (❐)
Lubricants
for diesel
engines
(❐) For particularly cold temperatures use SELENIA PERFORMER MULTIPOWER SAE 5W-30Applications
F0D0146m
Fluid and lubricant specifications
for correct vehicle operations
Synthetic-based oil, grade SAE 10W-40 that passes
ACEA A3, API SL specifications
Synthetic-based oil, grade SAE 5W-30 that passes
ACEA A1, ACEA A5, API SL and FIAT 9.55535
specifications.
Synthetic-based oil, grade SAE 5W-40 that passes ACEA B4,
API CF and FIAT 9.55535 specificationsRecommended
fluids and lubricants
SELENIA 20K
SELENIA
PERFORMER
MULTIPOWER
SELENIA WR

242TECHNICAL SPECIFICATIONS
Use
Lubricants and grease
for transmission
Products for brakes
Radiatorantifreeze
Diesel fuel
additive
Windscreen/
rear window/
headlight washer fluid
(*) IMPORTANTThese two fluids cannot be mixed with each other. Contact Fiat Dealership for topping up.
Recommended
fluids and lubricants
TUTELA CAR
MATRYX
TUTELA GI/A
TUTELA HP 20
TUTELA
W 90/M-DA
TUTELA TOP 4
PARAFLU 11 (*)
or
PARAFLU UP (*)
DIESEL MIX
TUTELA
PROFESSIONAL
SC 35 Fluid and lubricant specifications
for correct vehicle operation
Fully synthetic lubricant SAE 75W-85 meeting API GL-4,
FIAT 9.55550
Lubricant for transmissions with ATF DEXRON II D LEV
properties
ATF DEXRON III oil type
Lubricant, grade SAE 80W-90 that passes API GL5, MIL-L-
2105 D, IVECO 18-1804, FIAT 9.55550 and FIAT 9.55523
specifications
Synthetic fluid, FMVSS n° 116 DOT 4, ISO 4925,
SAE J-1704, CUNA NC 956 - 01
Protective with antifreeze action based on
inhibited monoethylen glycol, CUNA NC 956-16
Protective with antifreeze action (red colour) based on inhib-
ited monoethylen glycol, with O.A.T. formulation, that passes
CUNA NC 956-16, ASTM D 3306 specifications.
Diesel fuel additive providing diesel engine protection
Mixture of alcohol and surfactants CUNA NC 956 -IIApplications
Mechanical
transaxles developping
high temperatures
Power steering system
Automatic gearbox
EP oil for standard and
self-locking differentials
Hydraulic brake and
clutch controls
Cooling circuits.
Proportion: 50% down
to -35° C Not to be
mixed with products
having different
formulas.
To be mixed with
diesel fuel
(25 cc every 10 litres)
To be used pure
or diluted