boot FIAT PANDA 2007 169 / 2.G 4x4 Supplement Manual
[x] Cancel search | Manufacturer: FIAT, Model Year: 2007, Model line: PANDA, Model: FIAT PANDA 2007 169 / 2.GPages: 26, PDF Size: 1.13 MB
Page 7 of 26
6
FIAT PANDA 4 x 4
After changing the wheel
❒put the jack partly open and the tools
used into the tool bag;
❒stow the bag with tools into its place
under the driver’s seat.
IMPORTANT Replaced wheel shall be
placed in the boot under the cover mat as
shown in fig. 10.
IMPORTANT Do not use inner tubes
with tubeless tyres. Check tyre and space-
saver spare wheel pressure regularly.IMPORTANT Changing original wheels
with others of different type (i.e.: with al-
loy rim instead of steel rims and vice ver-
sa) will involve to change the whole set
of wheel bolts with others of suitable
length. It is however recommended to
keep replaced bolts in the event of future
refitting of the original wheels.
fig. 10F0G0615m
603.83.460 PANDA 4X4 GB 26-06-2007 11:19 Pagina 6
Page 13 of 26
12
FIAT PANDA 4 x 4
20 40 60 80 100 120 140 160 180
●●●●● ●●●●
●●●●● ●●●●
●●●●● ●●●●
●●●●● ●●●●
●●●●● ●●●●
●● ● ●
●●●●● ●●●●
●●●●● ●●●●
●
●● ● ●
●● ● ●
●● ● ●
●●
SERVICE SCHEDULE
Thousands of km
Check tyre conditions/wear and adjust pressure
if required
Check light system operation (headlights, direction indicators,
hazard lights, passenger compartment lights, boot lights,
warning lights, etc.)
Check windscreen wiper/washer operation,
adjust nozzles
Check windscreen/rear window blade
position/wear
Check front disk brake pad conditions and wear
Check rear disk brake pad conditions and wear
Sight inspect the conditions of: body external parts,
underbody protection, pipes and hoses
(exhaust - fuel - brakes), rubber parts
(boots, sleeves, bushes, etc.)
Check cleanness of locks, bonnet and boot and lever cleanness
and lubrication
Check tension and adjust accessory drive belts
(excluding engines with automatic belt tighteners)
Sight inspect accessory drive belt conditions
Check and adjust tappet clearance (petrol versions)
Check handbrake lever stroke
Check antievaporation system (petrol versions)
603.83.460 PANDA 4X4 GB 26-06-2007 11:19 Pagina 12
Page 20 of 26
19
FIAT PANDA 4 x 4
BOOT VOLUME
Unladen boot volume (V.D.A. standards) in dm
3.
Boot closed and rear parcel shelf mounted
Boot at waist edge with rear seat back folded
Max. height to roof with rear seat back folded
Max. height to roof with rear seat back folded
(with sunroof)
(*) With seat set completely in backward position
(**) With seat set completely in forward position
petrol
145Multijet
150petrol
145Multijet
150Multijet
150
PERFORMANCE
Fiat Panda 4 x 4 Fiat Panda 4 x 4 ClimbingFiat Panda 4 x 4 CROSS
Top admitted
speed after running-in
in km/hRear single
and double seat
200
485
855
810Rear sliding
seat
170 (*) 230 (**)
410
780
735
603.83.460 PANDA 4X4 GB 26-06-2007 11:19 Pagina 19
Page 22 of 26
21
FIAT PANDA 4 x 4
Fiat Panda 4 x 4Fiat Panda 4 x 4
ClimbingFiat Panda 4 x 4
CROSS
WEIGHTS
Weights (kg)
Kerb weight
(including fuel, space-saver
spare wheel, tools and accessories):
Payload (*)
including the driver:
Maximum admitted loads (**)
– front axle:
– rear axle:
– total:
Towable loads
– trailer with brakes:
– trailer without brakes:
Maximum load on roof (***):
Maximum load on tow hitch
(trailer with brakes):
(*) If special equipment is fitted (sunroof, tow hitch, etc.) the unladen car weight increases, thus reducing the payload as specified
in the max. admitted loads.
(**)Loads not to be exceeded. The driver is responsible for arranging the loads in the boot and/or on the
roof so that they comply with these limits.
(***) Lineaccessori Fiat roof rack, max. capacity: 50 kg.petrol Multijet
965 1060
445 445
750 825
735 735
1410 1505
800 900
400 400
50 50
60 60petrol Multijet
980 1075
445 445
750 825
735 735
1425 1520
800 900
400 400
50 50
60 60Multijet
1090
445
830
735
1535
900
400
50
60
603.83.460 PANDA 4X4 GB 26-06-2007 11:19 Pagina 21