brake FIAT PANDA 2009 169 / 2.G 4x4 Supplement Manual
[x] Cancel search | Manufacturer: FIAT, Model Year: 2009, Model line: PANDA, Model: FIAT PANDA 2009 169 / 2.GPages: 26, PDF Size: 0.64 MB
Page 3 of 26
2
FIAT PANDA 4 x 4
ESP SYSTEM
(Electronic Stability
Program)
(for versions/markets, where provided)
Le système ESP comprend:
❒Le système EBD (Electronic Braking
force Distribution) qui permet de ré-
partir le freinage entre les roues avant
et arrière.
❒ABS (Antiblocking System), système an-
tiblocage des roues en freinage;
❒ASR (Active Spin Regulation), qui per-
met de contrôler le patinage des roues
motrices en intervenant sur les freins
et sur le couple moteur;
❒MSR (Motor Schleppmomenten
Regelung - Regulation of engine braking
torque), which intervenes in the event
of a sudden change of gear whilst down-
shifting (preventing the wheels from
locking during deceleration when the
accelerator is released), restoring
torque to the engine, thereby avoiding
excessive drag of the driving wheels
which can lead to a loss of vehicle sta-
bility and control, particularly in poor
grip conditions;
❒HBA (Hydraulic Brake Assist), système
qui rend plus efficace un éventuel
freinage d’urgence ;
❒HH (Hill Holder) which, if the brake
pedal is pressed, on a gradient (uphill or
downhill), keeps the vehicle braked for
the time required to set off while the
foot moves from the brake pedal to the
accelerator pedal.
For more details on the operation of the
above functions, refer to the Owner
Handbook under the ESP System section.
Compared with the version with two dri-
ve wheels, the ESP system includes the
ELD function (Electronic Locking Differ-
ential) which improves drive.ABS SYSTEM
This version is provided as standard with
the ABS system and includes:
❒EBD (Electronic Braking Force Distrib-
ution), that distributes the braking ef-
fect between front and rear wheels;
❒MSR (Motor Schleppmomenten
Regelung - Regulation of engine braking
torque), which intervenes in the event
of a sudden change of gear whilst down-
shifting (preventing the wheels from
locking during deceleration when the
accelerator is released), restoring
torque to the engine, thereby avoiding
excessive drag of the driving wheels
which can lead to a loss of vehicle sta-
bility and control, particularly in poor
grip conditions.
603_97_560 PANDA 4X4 Euro 5 GB 11-12-2009 9:31 Pagina 2
Page 4 of 26
3
FIAT PANDA 4 x 4
ELD - ELECTRONIC
LOCKING
DIFFERENTIAL
(for versions/markets, where provided)
The ELD (Electronic Locking Differential)
is a further aid when driving or starting the
car in poor grip conditions (snow, ice,
mud, etc.) since it enables to distribute
power adequately to the same axle when
one or more wheels are slipping.
The ELD actually brakes the wheels that
are loosing grip (or that are slipping more
than others) and it transmits power to
wheels having best grip.
This function can be turned on manually
by pressing the ELD button in the dash-
board and works below a level of 50 km/h.
When this speed is exceeded, it is auto-
matically deactivated (the LED in the ELD
button remains on) and it is reactivated as
soon as the speed goes below the level
of 50 km/h.ELD operation
At start-up the ELD system is off.
To turn the ELD system on, press button
fig. 1; the relevant button led will turn on.
The activation of the ELD system involves
the following functions being switched on:
– Permanent four wheel drive, so that the
vehicle is more responsive;
– Inhibition of the ASR function, in order
to fully exploit the engine torque;
– Differential lock effect on the front and
rear axles, via the braking system, to im-
prove drive on uneven surfaces.
If there is a problem with the ELD system,
the (ESP) warning light will come on con-
stantly.4 x 4 Drive - Signals
The warning light in fig. 2-3provides two
different types of signals:
❒signalling with flashing light: this indi-
cates that the differential lock function
(ELD) is activated, for versions with ESP
only and with the ELD button pressed;
fig. 1F0G0605mfig. 2F0Z0743m
fig. 3F0Z0742m
603_97_560 PANDA 4X4 Euro 5 GB 11-12-2009 9:31 Pagina 3
Page 5 of 26
4
FIAT PANDA 4 x 4
❒signalling with light on constantly: this
indicates that there is a problem with
the 4 x 4 drive; go to a Fiat Dealership
as soon as possible (where provided,
the display will show a dedicated mes-
sage). In addition, on versions with ESP,
if the ELD is on, the LED in the button
will go out.HEADLIGHT WASHER
(for versions/markets, where provided)
The headlight washing system consists of
two nozzles for washing the external
headlight lens. This function can be acti-
vated using the windscreen washer stalk
only if dipped beams or main beams are
on. Operating the stalk to wash the wind-
screen will automatically start the head-
light washer.
This version features a windscreen wash-
er fluid reservoir with improved capaci-
ty, i.e.: 4.5 litres.
IF A TYRE
IS PUNCTURED
General instructions
The vehicle may come (for versions/mar-
kets where provided) with either a space-
saver wheel or Fix & Go quick tyre repair
kit.
Wheel changing and correct use of the jack
and space-saver spare wheel call for some
precautions as listed in the Owner Hand-
book this Supplement is attached to. In the
Owner Handbook you will also find how
to use the Fix & Go kit (quick tyre repair
kit).
To change a wheel proceed as follows:
❒stop the car in a position that is not
dangerous for oncoming traffic where
you can change the wheel safely. The
ground should be flat and adequately
firm;
❒turn the engine off and pull up the hand-
brake;
❒engage first gear or reverse;
603_97_560 PANDA 4X4 Euro 5 GB 11-12-2009 9:31 Pagina 4
Page 9 of 26
8
FIAT PANDA 4 x 4
❒loosen the three fastening screws A-
fig. 16and remove the headlight cov-
er;
❒remove the cover by removing the
catches B;
❒remove the lens fig. 17by loosening
the three fastening screws A;
❒turn connector A-fig. 18counter-
clockwise and remove it;
❒remove the bulb B-fig. 18and fit the
new bulb.
To change the direction indicator bulb,
proceed as follows:
❒loosen the two fastening screws A-
fig. 19and remove the cover B;
❒loosen the fastening screws A-fig. 20
and remove the lens B;
❒remove the cap A-fig. 21from the lens
Band remove the bulb holder C;
❒remove bulb Dby pushing it slightly and
turning it counter-clockwise, then fit
the new bulb.
To change side direction indicators, third
brake light and number plate light bulbs re-
fer to paragraph “When needing to change
a bulb” in section “In an emergency” in the
attached Owner Handbook.
fig. 16F0G0620mfig. 18F0G0622m
fig. 17F0G0621mfig. 19F0G0623m
fig. 20F0G0624m
fig. 21F0G0631m
603_97_560 PANDA 4X4 Euro 5 GB 11-12-2009 9:31 Pagina 8
Page 10 of 26
9
FIAT PANDA 4 x 4
REAR LIGHT UNITS
The bulbs are arranged inside the light unit
as follows fig. 22:
A12V-W5W, double filament bulb for
brake lights/taillights.
B12V-P21W bulb for direction indica-
tors.
C12V-P21W bulb for rear fog light (left
headlight) or reversing light (right head-
light).To change a bulb proceed as follows:
❒loosen the three screws A-fig. 23then
pull gently the headlight outwards un-
til releasing it from the three catches;
fig. 23F0G0625mfig. 24F0G0626m
❒loosen the four screws A-fig. 24and
disconnect the two connectors;
❒remove the required bulb holder turn-
ing it counter-clockwise;
❒remove the required bulb (A, Bor C-
fig. 22), pushing it slightly and turning
it counter-clockwise (bayonet cou-
pling), then fit the new bulb.
fig. 22F0G0627m
603_97_560 PANDA 4X4 Euro 5 GB 11-12-2009 9:31 Pagina 9
Page 11 of 26
10
FIAT PANDA 4 x 4
WASHING THE CAR
After using the car off-road (wheels, body,
underengine and underbody protections
very dirty), remember to wash it and to
clean accurately radiators (engine and air-
conditioner), radiator fan and wheels (rims
and wheelhouses), underengine and un-
derbody protections to preserve their
regular operation and to guarantee prop-
er ventilation of brake discs, perfect wheel
geometry and regular operation of the
propeller shaft.
TOWING THE CAR
The car can only be towed in one of the
following ways (always and exclusively
with the engine off, gearbox in neutral and
handbrake disengaged):
– with the 4 wheels on the roadbed;
– with front wheels raised or resting on
the wrecking car floor and rear wheels
resting on a suitable truck;
– with rear wheels raised or resting on the
wrecking car floor and front wheels rest-
ing on a suitable truck;
– on wrecking car, with front and rear
wheels resting on the wrecking car floor.
TOWING TRAILERS
IMPORTANT If the car is used at its max.
towing capacity on sloping road, change
engine oil every 10,000 km.
As concerns tow hook installation in-
structions and warnings refer to the at-
tached Owner Handbook.
603_97_560 PANDA 4X4 Euro 5 GB 11-12-2009 9:31 Pagina 10
Page 13 of 26
12
FIAT PANDA 4 x 4
20 40 60 80 100 120 140 160 180
●●●●● ●●●●
●●●●● ●●●●
●●●●● ●●●●
●●●●● ●●●●
●●●●● ●●●●
●● ● ●
●●●●● ●●●●
●●●●● ●●●●
●
●● ● ●
●● ● ●
●● ● ●
SERVICE SCHEDULE
Thousands of km
Check tyre conditions/wear and adjust pressure
if required
Check light system operation (headlights, direction indicators,
hazard lights, passenger compartment lights, boot lights,
warning lights, etc.)
Check windscreen wiper/washer operation,
adjust nozzles
Check windscreen/rear window blade
position/wear
Check front disk brake pad conditions and wear
Check rear disk brake pad conditions and wear
Sight inspect the conditions of: body external parts,
underbody protection, pipes and hoses
(exhaust - fuel - brakes), rubber parts
(boots, sleeves, bushes, etc.)
Check cleanness of locks, bonnet and boot and lever cleanness
and lubrication
Check tension and adjust accessory drive belts
(excluding engines with automatic belt tighteners)
Sight inspect accessory drive belt conditions
Check and adjust tappet clearance (petrol versions)
Check handbrake lever stroke
603_97_560 PANDA 4X4 Euro 5 GB 11-12-2009 9:31 Pagina 12
Page 14 of 26
13
FIAT PANDA 4 x 4
20 40 60 80 100 120 140 160 180
●● ●
●● ●●●●●●●
●●
●
●●●●
●●●●
●●
●● ●●●●●●●
●● ●
●● ●●●●●●●
●●●●
●● ●
Thousands of km
Change air cleaner cartridge
(every 30,000 km/for 1.3 Multijet engine)
Top up fluids
(engine coolant, brakes, windscreen, battery, etc.)
Check timing belt
(excluding 1.3 Multijet engines)
Replace timing belt (*)
(excluding 1.3 Multijet engine)
Change spark plugs (petrol versions)
Check engine control system operation
(through diagnosis socket)
Check mechanical transmission oil level
Change engine oil and oil filter
(every 30,000 km/for 1.3 Multijet engine)
Change brake fluid (or every 2 years)
Change pollen filter (or every year)
Check exhaust emissions/smoke (1.3 Multijet engine)
Replace fuel filter cartridge (Green-filter)
(1.3 Multijet engine)
(*) Irrespective of mileage, the timing drive belt must be replace every 4 years for heavy duty applications, cold climates, town use, long periods idling) or at
least every 5 years.
603_97_560 PANDA 4X4 Euro 5 GB 11-12-2009 9:31 Pagina 13
Page 22 of 26
21
FIAT PANDA 4 x 4
1.2
30
4.5
–
–
4.6
2.5
2.8
–
–
2.7
0.6
0.55
4.51.3 Multijet
–
–
30
4.5
6.5
–
–
2.8
3.0
2.7
0.6
0.55
4.5
CAPACITIES
Fuel tank: litres
including a reserve of: litres
Fuel tank: litresincluding a reserve of: litres
Engine cooling system: litres
Engine sump: litres
Engine sump and filter: litres
Engine sump: litres
Engine sump and filter: litres
Gearbox/differential: litres
Rear differential: litres
Hydraulic brake circuit: kg
Windscreen/rear window and
headlight washer fluid reservoir litres
(*) For use in particularly harsh weather conditions SELENIA PERFORMER MULTIPOWERengine oil is recommended
(**) SAE 75W-85synthetic oil that passes API GL4 PLUS, MIL - L - 2105 D Lev specifications
(***) Synthetic oil SAE 75W-85. that passes API GL5, MIL - L - 2105 D Lev specificationsSpecified fuels
and recommended products
Unleaded premium petrol with no
less than 95 R.O.N
(EN 228 Specification)
Diesel fuel for motor vehicles
(EN 590 Specification)
Mixture of 50% water and 50%
PARAFLU
UP
SELENIA 20K(*)
SELENIA WR
TUTELA CAR TECHNYX (**)
TUTELA CROSS 75W85(***)
TUTELA TOP 4
Mixture of water and
TUTELA PROFESSIONAL SC 35
603_97_560 PANDA 4X4 Euro 5 GB 11-12-2009 9:31 Pagina 21
Page 23 of 26
22
FIAT PANDA 4 x 4
Fiat Panda 4 x 4Fiat Panda 4 x 4
ClimbingFiat Panda 4 x 4
CROSS
WEIGHTS
Weights (kg)
Kerb weight
(including fuel, space-saver
spare wheel, tools and accessories):
Payload (*)
including the driver:
Maximum admitted loads (**)
– front axle:
– rear axle:
– total:
Towable loads
– trailer with brakes:
– trailer without brakes:
Maximum load on roof (***):
Maximum load on tow hitch
(trailer with brakes):
(*) If special equipment is fitted (sunroof, tow hitch, etc.) the unladen car weight increases, thus reducing the payload as specified
in the max. admitted loads.
(**) Loads not to be exceeded. The driver is responsible for arranging the loads in the boot and/or on the roof so that they com-
ply with these limits.
(***) Lineaccessori Fiat roof rack, max. capacity: 50 kg.petrol Multijet
965 1060
445 445
750 825
735 735
1410 1505
800 900
400 400
50 50
60 60petrol Multijet
980 1075
445 445
750 825
735 735
1425 1520
800 900
400 400
50 50
60 60Multijet
1090
445
830
735
1535
900
400
50
60
603_97_560 PANDA 4X4 Euro 5 GB 11-12-2009 9:31 Pagina 22