pcv hose FORD MUSTANG 2003 User Guide

12. Disconnect the exhaust gas recirculation (EGR) tube from the EGR valve.
13. Disconnect the positive crankcase ventilation (PCV) hose from the base of the throttle body.
14. Disconnect the PCV valve hose.
15. Remove the engine wiring harness. Klj . 5 ba
242003 Mustang Workshop Manual
17. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_4464/S3B~us~en~ ...

86. Position the throttle body and install the bolts, tighten in the sequence shown.
87. Connect the vacuum line to the fuel pressure sensor.
88. Connect the PCV hose.
89. Connect the PCV hose to the base of the throttle body. Klj . 31 ba
362003 Mustang Workshop Manual
17. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_4464/S3B~us~en~ ...

61. Connect the vacuum line to the fuel pressure sensor.
62. Install the positive crankcase ventilation (PCV) valve and hose as an assembly.
63. Connect the PCV hose to the base of the throttle body.
64. Connect the EGR tube to the EGR valve. Klj . 21 ba
252003 Mustang Workshop Manual
17. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_4464/S3B~us~en~ ...

13. Disconnect the vacuum hoses at the back of the supercharger and remove the vacuum
harness.
14. Remove the vacuum accessory bracket mounting nut.
15. Remove the mounting bolts and the vacuum accessory bracket. 16. Remove the positive crankcase ventilation (PCV) valve. Klj . 5 ba
232003 Mustang Workshop Manual
17. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_4464/S3B~us~en~ ...

17. Disconnect and remove the PCV hose.
18. Disconnect the barometric pressure (BARO) sensor electrical connector.
19. Disconnect the EGR tube from the exhaust manifold.
20.
NOTE: Discard the EGR valve gasket.
Remove the EGR valve and tube as an assembly. Klj . 6 ba
232003 Mustang Workshop Manual
17. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_4464/S3B~us~en~ ...

DISASSEMBLY AND ASSEMBLY OF SUBASSEMBLIES
Intake Manifold Assembly
Disassembly and Assembly
1. Disconnect and remove the PCV hoses.
2. Remove the coolant supply and return manifold.
3. Remove the coolant supply and return tubes and seals. 4. Remove the bolts, the supercharger and the charge air cooler (CAC) assembly. SECTION 303-
01C: Engine — Cobra 4.6L (4V) 2003 Mustang Workshop Manual Klj . 1 ba
32003 Mustang Workshop Manual
17. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_4464/S3B~us~en~ ...

86. Tighten the EGR tube to the exhaust manifold.
87. Connect the barometric pressure (BARO) sensor electrical connector.
88. Install and connect the positive crankcase ventilation (PCV) hose.
89. Install the PCV valve.
90. Install the vacuum accessory bracket and the mounting bolts. Klj . 30 ba
352003 Mustang Workshop Manual
17. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_4464/S3B~us~en~ ...

Installation
1. Install the upper intake manifold gasket.
2. Install the intake manifold and bolts in the sequence shown.
3. Install the PCV valve- to-intake manifold tube.
4. Connect the vacuum hoses and the electrical connector to the EGR vacuum regulator solenoid. Klj . 4 ba
72003 Mustang Workshop Manual
17. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_4464/S3B~us~en~ ...

11. Remove the bolt and position the oil level indicator tube aside.
12. Disconnect the positive crankcase ventilation (PCV) valve hose and the electrical connector.
13. Disconnect the wiring harness anchor from the valve cover.
14. Remove the LH valve cover. Klj . 3 ba
82003 Mustang Workshop Manual
17. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_4464/S3B~us~en~ ...

3. Tighten the LH valve cover bolts in the sequence shown.
4. Connect the wiring harness anchor to the valve cover stud bolt.
5. Connect the positive crankcase ventilation (PCV) valve hose and electrical connector. Klj . 5 ba
82003 Mustang Workshop Manual
17. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_4464/S3B~us~en~ ...