adding oil FORD MUSTANG 2003 Workshop Manual

FORD MUSTANG 2003 Workshop Manual MUSTANG 2003 FORD FORD https://www.carmanualsonline.info/img/11/56942/w960_56942-0.png FORD MUSTANG 2003 Workshop Manual

Page 1842 of 4378

FORD MUSTANG 2003  Workshop Manual The 3.8L cooling system components include the: 
�zblock heater 
�z engine coolant temperature (ECT) sensor 
�z fan blade, fan motor and fan shroud assembly 
�z radiator 
�z radiator cap 
�z radiator

Page 1854 of 4378

FORD MUSTANG 2003  Workshop Manual GENERAL PROCEDURES 
Cooling System Draining, Filling and Bleeding 
Draining 
 WARNING: Never remove the pressure relief cap while the engine is operating or when the 
cooling system is hot. Failure to

Page 1856 of 4378

FORD MUSTANG 2003  Workshop Manual  CAUTION: Vehicle cooling systems are filled with Motorcraft Premium Gold Engine 
Coolant VC -7-A (in Oregon VC -7-B) or equivalent meeting Ford specification WSS- M97B51-A1 
(yellow color). Always fi

Page 1857 of 4378

FORD MUSTANG 2003  Workshop Manual "COOLANT FILL LEVEL" marks and replace the pressure cap. 
7. Select the maximum cool temperature setting. 
8. Run the engine until it reaches operating temperature. 
9.  CAUTION: If the engine coolant

Page 1858 of 4378

FORD MUSTANG 2003  Workshop Manual 3. Remove the pressure cap from the cooling system reservoir and the fill plug from the engine 
crossover tube. 
4.  CAUTION: Do not fill the cooling system through the reservoir only. Coolant will no

Page 1898 of 4378

FORD MUSTANG 2003  Workshop Manual DESCRIPTION AND OPERATION 
Supercharger Cooling 
 CAUTION: Some vehicle cooling systems are filled with Motorcraft Premium Engine 
Coolant VC -4-A (in Oregon VC- 5, in Canada CXC- 10) or equivalent me

Page 1907 of 4378

FORD MUSTANG 2003  Workshop Manual GENERAL PROCEDURES 
Supercharger Cooling System Draining, Filling and 
Bleeding 
Draining 
 WARNING: Never remove the pressure relief cap while the engine is operating or when the 
cooling system is h

Page 3121 of 4378

FORD MUSTANG 2003  Workshop Manual Connect an R-
134a A/C service center to the low-  and high-pressure service gauge port valves. 
3. Recover the refrigerant from the system following the operating instructions provided by the  equipm

Page 3124 of 4378

FORD MUSTANG 2003  Workshop Manual 6. Correctly oil match the system. For additional information, refer to 
Refrigerant Oil Adding  in this 
section. 
7. Evacuate and charge the system. For additional information, refer to  Air Conditi

Page 3125 of 4378

FORD MUSTANG 2003  Workshop Manual GENERAL PROCEDURES 
Refrigerant Oil Adding 
 CAUTION: During normal A/C operation, oil is circulated through the system with the 
refrigerant, and a small amount is retained in each component. If cert
Page:   1-10 11-20 next >