engine oil FORD MUSTANG 2013 5.G Shelby GT500 Supplement Manual

Introduction
3
Welcome 3
Shelby® GT500® Unique Features
5
Safety Belts
10
Driving your Shelby® GT500®
11
Breaking-in your vehicle 11
Transmission operation 11
Clutch protection 12
Virtual gauges 15
Track Apps 15
AdvanceTrac® 16
Brakes 20
Launch control 20
Electronically selectable dampers 21
Engine over-rev 22
Ground clearance 23
Driving through water 24
Washing your vehicle 24
Wheels and Tires
25
Wheels 25
Wheel lug nut torque 25
Tire information 26
Roadside Emergencies
29
Wrecker towing 29
Maintenance
34
Engine oil 35
Air filter(s) 40
Table of Contents
1
2013 05+ Mustang(197)
Supplement, 1st Printing
USA(fus)

•5.8L DOHC 32V Supercharged and intercooled V8 engine
•Water-to-oil engine oil cooler (standard)
•Race-track inspired, thermostatically controlled air-to-oil axle,
transmission, and engine cooler included on the SVT Track Pack
(optional)
•Cast aluminum structural oil pan and piston oil squirters
•Low-restriction, cold air intake system
•SVT tuned 2.75 inch exhaust system with Quad 3.5 inch tips
•Electronically programmable launch control
•TREMEC TR6060 high–torque capacity 6-speed manual transmission
•Short-throw shifter with SVT shift knob
•260 millimeter twin disc clutch
•One piece carbon fiber driveshaft with front and rear CV joints
•AdvanceTrac® Stability Enhancement System with sport mode
specifically calibrated and race track tuned by SVT. Refer to the
Stability Controlchapter in yourOwner’s Manualfor more
information.
•Limited slip rear differential with 3.31 rear axle ratio
•TORSEN® limited slip differential included on the SVT Performance
Package (optional)
Shelby® GT500® Unique Features
5
2013 05+ Mustang(197)
Supplement, 1st Printing
USA(fus)

•Front brakes: Brembo™ six-piston aluminum calipers with 15 inch x
1.3 inch (380 millimeter x 32 millimeter) vented disc, high air flow
shields and high-performance friction material pads
•Rear brakes: 13.8 inch x 0.75 inch (350 millimeter x 19 millimeter)
vented disc and high-performance friction material pads
•Electronic over-rev with 7000 rpm maximum
•SVT tuned front and rear suspension and optional electronically
selectable dampers by Bilstein™ included on the SVT Performance
Package
•19 inch x 9.5 inch front, 20 inch x 9.5 inch rear forged aluminum
wheels with bolt-in valve stems (standard and optional styles)
•P265/40-19 front, P285/35-20 rear directional Goodyear Eagle F1
Supercar G2 R compound tires
•SVT engineered front fascia, grilles, cold air inlet, rear fascia, fog
lamps, hood with functional air extractor and aerodynamically tuned
front splitter with removable air dam and rear decklid spoiler
•SVT high-speed instrument cluster with track applications dashboard,
over-rev and programmable performance shift indicator
•One-touch instrument panel buttons for launch control (LC),
electronically selectable dampers (ESD) (if equipped) and electric
power assisted steering (EPAS)
•SVT designed seats with over the top stripes and increased lateral
support
•Optional race inspired RECARO® front seats with increased lateral
support on back and cushion, unique Shelby GT500 trim cover,
integrated head restraint, and driver four-way manual adjuster. See the
Seatssection in yourOwner’s Manualfor more information
•Leather and Alcantara® wrapped sport steering wheel, leather shift
boot, parking brake control boot and handle
•I/P appliques, door panels and lighted scuff plates
Shelby® GT500® Unique Features
6
2013 05+ Mustang(197)
Supplement, 1st Printing
USA(fus)

Engine Information
Item Description
ConfigurationLongitudinally mounted, 90-degree
V8, cast aluminum cylinder block
and cylinder heads
Bore x Stroke3.681 x 4.165 inch
(93.5 x 105.8 mm)
Displacement5810 cc (355 cid)
Compression ratio9.0:1
Horsepower on 93 octane fuel662 horsepower @ 6500 rpm
Torque on 93 octane fuel631 lb-ft torque @ 4000 rpm
Redline6250 rpm continuous
7000 rpm temporary over-rev
Specific output112 hp per liter
ValvetrainDual overhead chain-driven cams,
roller finger followers with
hydraulic lash adjustment,
ovate-wire valve springs, four
valves per cylinder
IgnitionHigh energy coil on plug ignition
with Motorcraft® Iridium-Platinum
spark plugs
Fuel system55 lb/hr injectors with twin
high-flow pumps
Mass air sensor105 mm (4.13 in.) circle
Throttle bodyTwin 60 mm (2.36 in.) diameter
bore-simultaneously open
PistonsShallow-dished forged aluminum
CrankshaftForged steel balanced with
tungsten inserts
Connecting rodsForged steel I-beam
SuperchargerEaton TVS 2300
Exhaust manifoldsCast high-silicon, molybdenum iron
Exhaust systemDual stainless steel
Shelby® GT500® Unique Features
8
2013 05+ Mustang(197)
Supplement, 1st Printing
USA(fus)

Engine Drivebelt Routing
5.8L DOHC Supercharged V8 Engine
SUSPENSION
Item Description
Front suspensionMacPherson strut with L-arm front
suspension
Rear suspension8.8 inch solid rear axle with 3–link and
Panhard bar and coil springs
Dampers (standard)TOKICO twin-tube struts and shocks
Dampers (optional)Electronically Selectable Dampers
(ESD) featuring Bilstein DampTronic®
select monotube shocks and inverted
monotube struts
Coupe stabilizer bars (front)33.2 x 5.0 mm tubular standard
(34.6 x 5.5 mm tubular optional)
Coupe stabilizer bars (rear)23.0 mm solid standard
(25.0 mm solid optional)
Coupe spring rates (standard)35.0 N/mm front and 33.5 N/mm Rear
Coupe spring rates (optional)45.0 N/mm front and 35.0 N/mm rear
Convertible stabilizer bars
(front)33.2 x 5.0 mm tubular standard and
optional
Convertible stabilizer bars
(rear)23 mm solid standard and optional
Convertible spring rates
(standard)32.5 N/mm front and 30.5 N/mm rear
Convertible spring rates
(optional)34.0 N/mm front and 31.5 N/mm rear
Shelby® GT500® Unique Features
9
2013 05+ Mustang(197)
Supplement, 1st Printing
USA(fus)

5.8L DOHC SUPERCHARGED V8 ENGINE
A. Battery
B. Supercharger
C. Engine oil dipstick
D. Brake fluid reservoir
E. Air filter assembly
F. Cold air induction system
G. Electric intercooler pump
H. Intercooler coolant reservoir
I. Engine coolant reservoir
J. Engine oil filler cap
K. Powertrain control module
L. Windshield washer reservoir
M. Power distribution box
ABCD
E
F
GHI
J
K
L
M
Maintenance
34
2013 05+ Mustang(197)
Supplement, 1st Printing
USA(fus)

ENGINE OIL RECOMMENDATION
Use Motorcraft® SAE 5W-50 full synthetic or an equivalent SAE 5W-50
full synthetic oil meeting Ford specification WSS-M2C931-B.
Do not use supplemental engine oil additives, cleaners or other engine
treatments. They are unnecessary and could lead to engine damage that
is not covered by Ford warranty.
Change your engine oil and filter according to the appropriate schedule
listed in thescheduled maintenance information.
CHECKING THE ENGINE OIL
Refer to thescheduled maintenance informationfor the appropriate
intervals for checking the engine oil.
1. Make sure the vehicle is on level ground.
2. Turn the engine off and wait 15 minutes for the oil to drain into the
oil pan.
3. Set the parking brake and make sure the gearshift is securely latched
in first gear.
4. Open the hood. Protect yourself from engine heat.
Maintenance
35
2013 05+ Mustang(197)
Supplement, 1st Printing
USA(fus)

5. Locate and carefully remove the
engine oil level dipstick.
6. Wipe the dipstick clean. Insert the
dipstick fully, then remove it again.
•If the oil level is between the
lower and upper holes, the oil level
is acceptable. DO NOT ADD OIL.
•If the oil level is below the lower
hole, add enough oil to raise the
level within the lower and upper
holes.
•
The maximum oil level is between
the upper hash mark and the
upper hole. Oil levels above this
range may cause engine damage.
Some oil must be removed from
the engine by an authorized dealer.
7. Put the dipstick back in and make sure it is fully seated.
ENGINE AND INTERCOOLER COOLANT
The concentration and level of engine coolant should be checked at the
mileage intervals listed in thescheduled maintenance information.
Note:Make sure that the level is between the MIN and MAX marks on
the engine and intercooler coolant reservoirs.
Note:For best results, coolant concentration should be tested with a
refractometer such as Rotunda tool 300-ROB75240E available from your
dealer. Ford does not recommend the use of hydrometers or coolant test
strips for measuring coolant concentrations.
Note:Coolant expands when it is hot. The level may extend beyond the
MAX mark. If the level is at the MIN mark, add coolant immediately.
Be sure to read and understandPrecautionsin yourOwner’s Manual.
If the coolant has not been checked at the recommended interval, the
engine or intercooler coolant reservoir may become low or empty. If the
reservoir is low or empty, add coolant to the reservoir. Refer toAdding
coolantin this chapter.
Maintenance
36
2013 05+ Mustang(197)
Supplement, 1st Printing
USA(fus)

MOTORCRAFT PART NUMBERS
Component 5.8L Supercharged V8 engine
Air filter element FA-1896
Fuel filter FG-1083
Battery BXT-96R-590
Oil filter FL-820S
Spark plugs CGSF-12YP
0.033 - 0.037 inches
(0.85 - 0.95 mm)
Capacities and Specifications
41
2013 05+ Mustang(197)
Supplement, 1st Printing
USA(fus)

TECHNICAL SPECIFICATIONS
Item CapacityFord part name or
equivalentFord part number /
Ford Specification
Brake fluidBetween MIN and
MAX lines on
reservoirMotorcraft® High
Performance DOT 3
Motor Vehicle Brake
FluidPM-1-C /
WSS-M6C62-A or
WSS-M6C65-A1
Engine oil without
cooler (with filter
change)
8.5 quarts (8.0L)Motorcraft® 5W-50 Full
Synthetic Motor OilX0-5W50-QGT /
WSS-M2C931-B
Engine oil with cooler
(with filter change)
Engine coolant
1
21.1 quarts
(20.0L)Motorcraft® Orange
Antifreeze/Coolant
PredilutedVC-3DIL-B (US)
CVC-3DIL-B (Canada) /
WSS-M97B44-D2
Intercooler coolant
1
5.4 quarts (5.1L)
Rear axle lubricant
without cooler
2
4 pints (1.9L)Motorcraft® SAE
75W-85 Premium
Synthetic Hypoid Gear
LubricantXY-75W85-QL /
WSS-M2C942–A
Rear axle lubricant with
cooler
2
6 pints (2.8L)
Rear axle fluid friction
modifier without cooler4 oz. (118 ml)
Additive Friction
ModifierXL-3
EST-M2C118-A
Rear axle fluid friction
modifier with cooler6 oz. (177 ml)
Fuel tank16.0 gallons
(60.5L)——
Capacities and Specifications
42
2013 05+ Mustang(197)
Supplement, 1st Printing
USA(fus)