engine FORD SIERRA 1993 2.G Reference Workshop Manual

FORD SIERRA 1993 2.G Reference Workshop Manual SIERRA 1993 2.G FORD FORD https://www.carmanualsonline.info/img/11/5460/w960_5460-0.png FORD SIERRA 1993 2.G Reference Workshop Manual

Page 2 of 26

FORD SIERRA 1993 2.G Reference Workshop Manual REF•2
Vehicle identification number (VIN) plate details
1  Type approval number
2  Vehicle identification number (VIN)
3  Gross vehicle weight
4  Gross train weight
5  Permitted front axle loading6

Page 3 of 26

FORD SIERRA 1993 2.G Reference Workshop Manual Buying spare parts
Spare parts are available from many
sources, including maker’s appointed
garages, accessory shops, and motor factors.
To be sure of obtaining the correct parts, it
will sometimes

Page 4 of 26

FORD SIERRA 1993 2.G Reference Workshop Manual Whenever servicing, repair or overhaul work
is carried out on the car or its components, it
is necessary to observe the following
procedures and instructions. This will assist in
carrying out the oper

Page 6 of 26

FORD SIERRA 1993 2.G Reference Workshop Manual Special tools
The tools in this list are those which are not
used regularly, are expensive to buy, or which
need to be used in accordance with their
manufacturers’ instructions. Unless relatively
di

Page 7 of 26

FORD SIERRA 1993 2.G Reference Workshop Manual MOT test checksREF•7
REF
This is a guide to getting your vehicle through the MOT test.
Obviously it will not be possible to examine the vehicle to the same
standard as the professional MOT tester. H

Page 9 of 26

FORD SIERRA 1993 2.G Reference Workshop Manual MOTtest checksREF•9
REF
Exhaust system
MStart the engine. With your assistant 
holding a rag over the tailpipe, check the
entire system for leaks. Repair or renew
leaking sections.
Jack up the front

Page 10 of 26

FORD SIERRA 1993 2.G Reference Workshop Manual REF•10MOTtest checks
MExamine the handbrake mechanism,
checking for frayed or broken cables,
excessive corrosion, or wear or insecurity of
the linkage. Check that the mechanism works
on each relevan

Page 11 of 26

FORD SIERRA 1993 2.G Reference Workshop Manual The vehicle owner who does his or her own maintenance according
to the recommended service schedules should not have to use this
section of the manual very often. Modern component reliability is such

Page 12 of 26

FORD SIERRA 1993 2.G Reference Workshop Manual headings denoting various components or systems, such as Engine,
Cooling system, etc. The Chapter and/or Section which deals with the
problem is also shown in brackets. Whatever the fault, certain bas

Page 13 of 26

FORD SIERRA 1993 2.G Reference Workshop Manual MFuel filter choked (Chapter 1).
MFuel pump faulty, or delivery pressure low (Chapter 4).
MFuel tank vent blocked, or fuel pipes restricted (Chapter 4).
MFuel injection system fault (Chapter 4).
Engin
Page:   1-10 11-20 21-30 next >