traction control FORD SUPER DUTY 2014 3.G Quick Reference Guide

1
3
4
2
5
76
8
1 STeering WHeeL cOnTrOLS*
use the controls to adjust frequently accessed features.
p ress Set + or Set -, rsm and oFF to set and adjust
the cruise control speed*.
use the left-hand controls to scroll through and make
selections from within your information display. use
the right-hand controls to adjust audio volume and
media selection, and to activate voice controls*.
2
POWer -AdJuSTABLe Ped ALS*
l ocated on the left side of the steering column, press
the
arrow to move the accelerator and brake pedals
farther away from you; press the arrow to move the
pedals closer.
Note: Adjust the pedals only when the vehicle
is in P (Park).
3 infOrMATiOn diSPLAY*
Monitor vehicle systems, receive alerts, and program
and configure certain vehicle features. Use your
steering wheel controls to scroll, make selections and
adjustments that will appear in the message center
within the instrument cluster.
The LCD productivity screen displays features
such as Gauge Mode with diesel-specific engine oil
temperature and exhaust filter information along with
transmission temperature and compass data.
A and B trip odometers also include trip time, fuel
used and average fuel economy.
Instant fuel economy also provides fuel history in
select increments and saves your last five resets.
Truck apps* include details about trailers and
off-road features.
The Settings menu delivers Driver Assist features such
as rear park aid, rear camera, and more. Refer to your
Owner’s Manual for more information.
4 SeLecTSHifT A uTOMATic®
TrAnSMiSSiOn*
Change gears without a clutch. Put the gearshift into
M (Manual) and press + to upshift and – to downshift.
To lock gears, put the gearshift lever into D (Overdrive)
and press – to lock out the gears. Only the available
gears will be displayed. Press + to unlock the gears.
5 TOW/HA uL MOde
Activate tow/haul to eliminate
excessive transmission shifting
when traveling on a grade.
When equipped with exhaust
braking (diesel only), this
feature also helps slow the
vehicle and assist the driver
while descending a grade.
6 HiLL deScenT cOnTrOL
while traveling at low speeds (between 2 mph
[3 km/h] and 12 mph [20 km/h]), activate to help
maintain vehicle speed while descending steep grades
in a variety of road conditions. t
o enable, press the
hill descent button. a light in the cluster will illuminate
and a tone will sound.
t o increase descent speed, press the accelerator pedal
until the desired speed is reached.
t o decrease speed, press the brake pedal until the
desired speed is reached.
Note: Hill descent control requires a cooling down
interval after sustained use. The amount of time that
the feature can remain active before cooling varies with
conditions. The system will provide a warning in the
message center and sound a chime when the system is
about to disengage for cooling. At this time, manually
apply the brakes as needed to maintain descent speed.
7 eLecTrOnic SHifT-On-THe -fLY
4X4 SYSTeM*
Rotate the knob and shift from 2WD to 4x4 High or Low:
2H (2Wd ) provides power to the rear wheels only. t his
is appropriate for street and highway driving, providing
optimal smoothness and fuel economy at high speeds.
4H (4Wd HigH) provides extra traction, such as
when driving in snow or on icy roads, or for off-road
situations. t his mode is not intended for use on
dry pavement.
4L (4Wd LOW) uses extra gearing to provide
maximum power to all four wheels at reduced speeds.
It is intended only for off-road applications, such as
while driving in deep sand or on steep grades, or while
pulling heavy objects.
Note: Do not use 4H or 4L on dry, hard-surfaced roads.
Doing so can produce extra noise and increase tire wear.
For more complete details, refer to the Four-Wheel Drive
chapter of your Owner’s Manual.
8 TrAiLer BrAke cOnTrOLLer*
t he fully integrated trailer brake controller (tBC)
synchronizes vehicle and trailer brakes for seamless
braking (even with the heaviest loads) to provide
added driving control and confidence. use the G aIn
adjustment buttons to increase or decrease the
braking feature’s power output to the trailer.
r efer to the Towing section of your Owner’s Manual
for more details.
9 LArge cOnTrOLS fOr eASY HAndLing
even when you are wearing gloves, the audio, climate
and other system controls are easy to adjust.
10 MediA HuB
11 uPfiTTer SWiT
cHeS*
t he four switches can be customized to control
additional functions, with 8, 12 or 20 amps of
electrical battery power.
91
11
*if e QuiPPed45
10
INSTRUMENT
INSTRUMENT
PANEL

*if equipped*if eQuiPPed18
AdVAnceTrA c®
WiTH rOLL
STABiLiTY
cOnTrOL™ (rSc
®)*
The system helps you keep
control of your vehicle when
on a slippery surface. The
electronic stability control
portion of the system helps
your vehicle avoid skids and
lateral slides. Roll stability
control helps your vehicle
avoid a vehicle rollover. The
traction control system helps
your vehicle avoid drive wheel
spin and a loss of traction. Press the control to turn portions of the system off.
Refer to your Stability Control chapter in your Owner’s Manual for more details.
eLecTrOnic LOcking differenTiAL (eLd )*
With the ELD engaged, the rear axle temporarily locks, allowing both rear
wheels to turn at the same speed. The function helps to provide additional
traction on slippery or off-road surfaces.
T O A cTiVATe
• In 4x4 vehicles with an electronic shift 4WD system, pull the 4WD control
knob toward you.
• In 2WD vehicles and vehicles equipped with a manual shift 4WD system, turn
the ELD control knob from OFF to ON.
• The indicator light
appears in the information display when ELD is active.
Note: ELD should not be used on dry surfaces.
reAr VieW
cAMerA SYSTeM*
Located under the Ford oval badge
on the tailgate, this camera provides
a video image of the area behind
the vehicle. During operation, lines
appear in the display which represent
your vehicle’s path and proximity
to objects behind the vehicle. The
display will automatically appear in
the navigation system screen* or in
the auto dimming rearview mirror
whenever the vehicle is in R (Reverse)
and uses colors (green, yellow and
red) to alert you of your proximity
to objects.
Note: Visibility aids do not replace
the need to watch where the vehicle is moving. Refer to your Owner’s Manual for
safety information, more details and limitations.
One-T OucH uP Or dOWn (frOnT WindOWS)*
This feature automatically opens or closes the window. Press or lift the switch
fully and release it. The window will open or close. Press or lift the switch again
to stop the window.
Note: The window may be disabled for up to five minutes if it is cycled up and
down repeatedly. This helps prevent damage to the motor. Normal operation
will resume once the motor cools.
funcTion
reVerSe SenSing S YSTeM*
The sensing system, only active when the transmission is in
R (Reverse), warns the driver of obstacles within a certain range of
the rear bumper area. It sounds a warning tone if there is an object
behind the vehicle. The tone will sound continuously when the
object is less than 12 inches (30 centimeters) away. The system is
not effective when the vehicle is traveling above 3 mph (5 km/h)
and may not detect certain angular or moving objects.
Note: Visibility aids do not replace the need to watch where
the vehicle is moving. Refer to your Owner’s Manual for safety
information, more details and limitations.
19*if e QuiPPed