gas type GEELY FC 2008 User Guide

Rear chair (fixing type)
Overhaul
Hint: When assembling, please work by the sequence
opposite with disassembling sequence, but when it has
items that need to pay special attention, it will add special
specification.
1. Disassemble rear row chair cushion assembly.
Pull rear row chair cushion assembly upwards, then disas-
semble it.
Note: when disassembling, it is necessary to hold the
bracket at two sides of fixing clasp, then pull it upwards
to prevent it from distorting.
2. Disassemble rear row chair backrest assembly
[68010076]
Disassemble three bolts and rear row chair backrest assembly.
3. Disassemble rear chair head pillow assembly
[68010077]
4. Disassemble exterior cover of rear row chair
backrest.
(a) Disassemble head pillow bracket.
(b) Disassemble the clamp, then disconnect exterior cover of
rear row chair backrest with gasket.
5. Disassemble exterior cover of rear row chair cushion.
Disassemble the clamp, then disconnect exterior cover of cush-
ion with gasket.
6. Assemble exterior cover of rear row chair cushion.
Use new clamp to assemble exterior cover of rear row chair
cushion in gasket.
Hint: Do not damage or dirty exterior cover of cushion.
When assembling clamp, it is necessary to prevent exterior
cover of cushion from crinkling.
7. Assemble exterior cover of rear row chair backrest.
Use new clamp to assemble exterior cover of rear row chair
backrest in gasket.
Hint: Do not damage or dirty exterior cover of cushion.
When assembling clamp, it is necessary to prevent exterior
cover of cushion from crinkling.
8. Assemble rear row chair backrest assembly
[68010076]
Torque: 8.0 N·m
Chair--Rear chair (fixing type)
Locking loop pliers
Locking loop pliers
A:100mm
 354 

Exterior/inner trim board--Front bumper
Change
Hint:
zWhen assembling, please work by the sequence which is opposite with disassembling
sequence; if necessary, it will have assembling instruction.
zPlease refer to subassembly figure of front bumper on page 379.
1. Disassemble radiator cover assembly [68000094]
(a) Disassemble the bolt and radiator cover assembly.
2. Disassemble inner gasket of left front wheel [68000225]
(a) Use disassembling tool for fixing clamp to disassemble two fixing clamps.
(b) Disassemble the screw and a part of inner gasket of left front wheel.
Hint: Disassemble the fixing clamp of screw and inner gasket of left front wheel in the scope of
front bumper which could be disassembled.
3. Disassemble inner gasket of right front wheel [68000228]
4. Disassemble front bumper [68000005]
(a) Disassemble four screws and two fixing clamps.
(b) Disassemble fixing clasp and front bumper.
(c) Equipping with fog light: disassemble two joints of fog light.
(d) Equipping with radar probe head: disassemble two radar probe heads (luxury type).
5. Disassemble reversing radar probe head assembly.
(a) Disassemble two fixing pedestals of radar probe head and two radar probe heads.
6. Disassemble left front fog light assembly [67000098]
(a) Disassemble fixing clasp and left front fog light assembly.
7. Disassemble right front fog light assembly [67000099]
 380