wheel GENESIS G80 2021 Premium Navigation Manual

242
Using Voice Recognition System
sTar Ting V oice recogniTion
1. Press the [i] button on the steering wheel remote control.
2. Say the desired voice command after the beep sound.
,noTe
䠐For proper recognition, please say the command after the voice instruction and beep
sound.
䠐When starting voice recognition, the voice command entry window with four
representative commands is displayed.
䠐If voice recognition is in [Beginner], then the system will provide the detailed voice
recognition guidance. If voice recognition is in [Standard], then the system will provide
the simple version of voice recognition guidance. If voice recognition is in [Expert], then
you will only hear a beep.
sKipping prompT messages
While a prompt is playing, press the [i] button on the steering wheel remote control quickly.
The prompt is immediately ended and a beep will sound.
After the beep, please say the voice command.
re-s Tar Ting V oice recogniTion
While the system waits for input, press the [i] button on the steering wheel remote control
quickly.
The beep tone will sound, indicating the system is listening for a new input.
Say a voice command.
ending Voice recogniTion
䠐While voice recognition is operating, press and hold the [i ] button on the steering wheel
remote control, or say "Exit".
䠐While using voice recognition, pressing other button except on the steering wheel remote
control or a different button on head unit will end voice recognition.
adjusTing V oice recogniTion V olume
While voice recognition is operating, turn [:/VOL] the wheel up/down on the front seat
control key or press [J/I] on the steering wheel remote control.

243
Using Voice Recognition System
basic opera Tion for Voice command ( seTTing fm)
1. Press the [i] button on the steering wheel remote control.
The system waits for your command and displays a list of available commands on the
screen.
2. If you hear a beep sound after voice guidance, say “Tune to FM”.

244
Using Voice Recognition System
abouT Voice command “help”
1. Press the [i] button on the steering wheel remote control.
2. If you hear a beep sound after voice guidance, say “Help”. The available commands are
displayed on the screen.
3. Select or say the displayed command on the screen.