oil HONDA CR-Z 2011 1.G User Guide

241
Maintenance
Maintenance Minder™
If the engine oil life is less than 15%, you will see the maintenance minder messages appear on the multi-information display every time you turn the ignition switch to ON
II. The messages notify you when to change the engine oil, or when to bring
your vehicle to a dealer for indicated maintenance services.
Displaying the Engine Oil Life

■
Turn the ignition switch to ON
1. II.
Press the
2.
button repeatedly until the engine oil life appears on the
multi-information display.
The system message indicator (
) comes on along with the maintenance minder
message.
Displaying the Engine Oil Life
Based on the engine operating conditions, the remaining engine oil life is calculated and displayed as a percentage.
Displayed Engine Oil
Life (%) Calculated Engine
Oil Life (%)
100 100 to 91 90 90 to 81
80 80 to 71
70 70 to 61
60 60 to 51
50 50 to 41
40 40 to 31
30 30 to 21
20 20 to 16
15 15 to 11
10 10 to 65 5 to 1
0 0
Maintenance Service Items
Remaining Engine Oil Life
(Information) Buttons
Main MenuTable of Contents

242
Maintenance
Maintenance Minder™
Maintenance Minder Messages on the Multi-Information Display
■
Maintenance MessageOil Life Display Explanation Information
SERVICE DUE SOON15% The remaining engine oil life is
15 to 6 percent. Once you switch the display by pressing the
button, this
message will go off. The engine oil is approaching the end of its service life, and the maintenance items should be inspected and serviced soon.
SERVICE DUE NOW5% The remaining engine oil life is
5 to 1 percent. Press the
button to switch
to another display. The engine oil has almost reached the end of its service life, and the maintenance items should be inspected and serviced as soon as possible.
SERVICE PAST DUENegative Distance
U.S. Canada The remaining engine oil life has passed its service life, and a negative distance appears after driving over 10 miles (US models) or 10 km (Canadian models). Press the
button to switch
to another display. The engine oil life has passed. The maintenance items must be inspected and serviced immediately.
Main MenuTable of Contents

243
Maintenance
Maintenance Minder™
Maintenance Service Items
■
System Message Indicator Maintenance Minder Message
Sub Items
Main Item
Maintenance Service Items
Independent of the maintenance minder
•
messages, replace the brake luid every 3 years. Inspect idle speed every 160,000 miles (256,000
•
km).Adjust the valves during services A, B, 1, 2, or 3
•
only if they are noisy.
*1: Change the engine oil according to the maintenance minder messages, or annually, whichever comes irst.
*2: If you drive in dusty conditions, replace the air cleaner element every 15,000 miles (24,000 km).
*3: If you drive primarily in urban areas that have high concentrations of soot in the air from industry and from diesel-powered vehicles, replace the dust and pollen ilter every 15,000 miles (24,000 km).
#: See information on maintenance and emissions warranty.
Code Maintenance Main Items
A Replace engine oil*
• 1
B Replace engine oil*
• 1
and oil filter
Inspect front and rear brakes
•
Check parking brake adjustment
•
Inspect tie rod ends, steering gear
•
box, and boots
Inspect suspension components
•
Inspect driveshaft boots
•
Inspect brake hoses and lines
•
(including ABS/VSA ®
)
Inspect all fluid levels and
•
condition of fluids
Inspect exhaust system
• #
Inspect fuel lines and connections
• #Code Maintenance Sub Items
1 Rotate tires •
2 Replace air cleaner element* • 2
Replace dust and pollen
•
filter* 3
Inspect drive belt
•
3 Replace transmission fluid •
4 Replace spark plugs •
Inspect valve clearance
•
5 Replace engine coolant •
Main MenuTable of Contents

244
Maintenance
Maintenance Minder™
Resetting the Display
■
Reset the engine oil life display if you have performed the maintenance service.
Turn the ignition switch to ON
1.
II.
Display the engine oil life by repeatedly pressing the
2.
button.
Press and hold the SEL/RESET button for 10 seconds or more.
3.
The oil life reset mode is displayed on the multi-information display.
Select “RESET” with the
4.
button, then press the SEL/RESET button.
The service code will disappear and the engine oil life display will return to
100 %.
To cancel the oil life reset mode, select “CANCEL”, then press the SEL/RESET button.
Resetting the Display
NOTICE Failure to reset the engine oil life after a maintenance service results in the system showing incorrect maintenance intervals, which can lead to serious mechanical problems. The dealer will reset the engine oil life display after completing the required maintenance service.If someone other than a dealer performs
maintenance service, reset the engine oil life disp lay
yourself.
Maintenance Item Codes
Engine Oil Life
SEL/RESET Button
(Information) Button
Main MenuTable of Contents

245
Maintenance
Maintenance Under the Hood
Maintenance Items Under the Hood
Brake Fluid (Black cap)
Washer Fluid (Blue cap)
Engine Coolant Reservoir
Engine Oil Fill Cap
Manual
Transmission model:Clutch Fluid(Light Gray cap)
Automatic Transmission (CVT) Fluid Dipstick
(Yellow loop)
Radiator Cap
Engine Oil Dipstick (Orange handle)
Main MenuTable of Contents

247
Maintenance
Maintenance Under the Hood Recommended Engine Oil
Recommended Engine Oil Oil is a major contributor to your engine’s performance and longevity. If you drive the vehicle with insufficient or deteriorated oil, the engine may fail or be damaged.This seal indicates the oil is energy conserving and that it meets the American Petroleum Institute’s latest requirements.
Genuine Honda Motor Oil
•
Premium-grade 0W-20 detergent oil with
•
an API Certification Seal on the container.
Use a commercial engine oil of suitable viscosity for the ambient temperature as shown below.
Synthetic Oil
■
You may also use synthetic motor oil if it is labeled with the API Certification Seal and is the specified viscosity.
Recommended Engine Oil
Engine Oil Additives Your vehicle does not require oil additives. In fact, they may adversely affect the engine or transmission performance and durability.
Ambient Temperature
-20 0 20 40 60 80 100�F
-30 -20 -10 0 10 20 30 40�C
Main MenuTable of Contents

248
Maintenance
Maintenance Under the Hood Oil Check
Oil Check We recommend that you check the engine oil level every time you refuel. Park the vehicle on level ground.Wait approximately 3 minutes after turning the engine off before you check the oil.1. Remove the dipstick (orange handle).Wipe the dipstick with a clean cloth or
2.
paper towel.Insert the dipstick back all the way into its
3.
hole.
4. Remove the dipstick again, and check the level. It should be between the upper and lower marks.
Oil Check
If it is near or below the lower mark, add oil.
Dipstick
Upper Mark Lower Mark
Main MenuTable of Contents

249
Maintenance
Maintenance Under the Hood Adding Engine Oil
Adding Engine Oil1. Unscrew and remove the engine oil fill cap. Slowly pour in the oil.
2.
Reinstall the engine oil fill cap, and tighten
3.
it securely.Wait for several minutes and recheck the
4.
engine oil dipstick.
Engine Oil Fill Cap
Adding Engine Oil
If any oil spills, wipe it up immediately. Spilled oil may damage the engine compartment components.
NOTICE Do not ill the engine oil above the upper limit
mark. Overilling the engine oil may result in engin e
damage.
Main MenuTable of Contents

250
Maintenance
Maintenance Under the Hood Changing the Engine Oil and Oil Filter
Changing the Engine Oil and Oil Filter You must change the engine oil and oil filter regularly in order to maintain the engine’s lubrication. The engine may be damaged if they are not changed regularly.Change the oil and filter in accordance with the maintenance message on the multi-information display.1. Run the engine until it reaches normal operating temperature, and then turn the engine off. Open the hood and remove the engine oil
2.
fill cap. Remove the bolts and clips on the
3.
undercarriage and remove the cover.
4. Remove the drain bolt and washer from the bottom of the engine, and drain the oil into a suitable container. Remove the oil filter and dispose of the
5.
remaining oil.
Changing the Engine Oil and Oil Filter
NOTICE You may damage the environment if you do not dispose of the oil in a suitable way. If you are changing the oil by yourself, appropriately dispose of the used oil. Put the oil in a sealed container and take it to a recycling center. Do not throw the oil away into a garbage can or onto the ground.
Under Cover
Bolt
Clip
Drain Bolt
Washer
Main MenuTable of Contents

251
Maintenance
Maintenance Under the Hood Changing the Engine Oil and Oil Filter
6. Check that the filter gasket is not stuck to the engine contact surface.
If it is stuck, you must detach it.
Wipe away dirt and dust adhering to the
7.
contact surface of the engine block, and install a new oil filter. Put a new washer on the drain bolt, then
8.
reinstall the drain bolt.
Tightening torque: 29 lbf∙ft (39 N∙m, 4.0 kgf∙m)
Pour the recommended engine oil into the
9.
engine.
Engine oil change capacity (including filter): 3.8 US qt (3.6 L)
Reinstall the engine oil fill cap back and
10.
start the engine. Run the engine for a few minutes, and
11.
then check that there is no leak from the drain bolt or oil filter. Stop the engine, wait for a few minutes,
12.
and then check the oil level on the engine oil dipstick.
If necessary, add more engine oil.
Oil Filter
Changing the Engine Oil and Oil Filter
You will need a special wrench to replace the oil ilter. You can buy this wrench from a dealer. When installing the new oil ilter, follow the instruction supplied with the oil ilter. Reinstall the engine oil ill cap. Start the engine. The low oil pressure indicator should go off within ive seconds. If it does not, turn off the engine, and check your work.
Main MenuTable of Contents