ECU Hyundai Equus 2016 Service Manual

3-147
Convenient features of your vehicle03
Sunvisor
Use the sunvisor to block direct sun-
light through the windshield or side
windows.
To use the sunvisor for the wind-
shield, pull it downward. To use the
sunvisor for the side window, pull it
downwards, unsnap it from the
bracket (1) and swing it to the side
(2).
To use the vanity mirror, pull down
the sunvisor and slide open the mir-
ror cover (3). Adjust the sunvisor
extension forward or backward (4).
The ticket holder (5) is provided for
holding a tollgate ticket.
- Vanity mirror lamp
Securely close the vanity mirror
cover and return the sunvisor to
its original position after using it.
If the vanity mirror is not securely
closed, the lamp will stay ON and
may result in battery discharge or
sunvisor damage.
Rear vanity mirror (if equipped)
To use the rear vanity mirror, press
the cover. Then, it will slowly open
and the mirror lamp will turn ON.
Securely close the mirror cover. If
the mirror cover is not closed, the
lamp will stay ON and may result
in battery discharge or mirror
damage.
NOTICE
NOTICE
OVI045201N
For your safety, do not obstruct
your view when using the sunvi-
sor.
CAUTION
OVI045141N

3-150
Convenient features of your vehicle
Clothes hanger
To use the hanger, pull down the
upper portion of hanger.
Do not hang heavy clothes, since
those may damage the hook.
Bag hanger (if equipped)
Pull the strap (1) to hang a bag on
the hook (2).
When you do not use the hook, fold
the hook.
Floor mat anchor(s)
(if equipped)
When laying a floor mat under the
driver's seat, make sure it attaches to
the floor mat anchor(s) of your vehi-
cle. This keeps the floor mat from
sliding forward.
NOTICE
OVI045140N
OVI045212N
OVI045427N
■Type A■Type B
The followings must be
observed when installing ANY
floor mat to the vehicle.
Ensure that the floor mats are
securely attached to the vehi-
cle's floor mat anchor(s) before
driving the vehicle.
Do not use ANY floor mat that cannot be firmly attached to
the vehicle's floor mat anchors.
Do not stack floor mats on top of one another (i.e. all-weather
rubber mat on top of a carpet-
ed floor mat). Only a single
floor mat should be installed
under each seat.
(Continued)
WARNING

3-151
Convenient features of your vehicle03
Luggage net (holder)
To keep items from tossing about in
the cargo area, you can use the lug-
gage net by hooking it on holders in
the cargo.
To prevent damage to the goods
or the vehicle, care should be
taken when carrying fragile or
bulky objects in the luggage com-
partment.
NOTICE
(Continued)
IMPORTANT - Your vehicle is
manufactured with driver's side
floor mat anchors that are
designed to securely hold the
floor mat in place. To avoid any
interference with pedal opera-
tion, it is highly recommended
that only the authorized EQUUS
floor mat be installed.
OVI045191N
Avoid eye injury. DO NOT over-
stretch the luggage net.
ALWAYS keep your face and
body away from any rebound or
spring of the luggage net. DO
NOT use the luggage net when
the strap is visibly worn out or
damaged.
CAUTION

A clicking sound may be heardwhile setting or releasing the
EPB. This is a normal condition,
and indicates that the EPB prop-
erly functions.
When leaving your key with a parking lot attendant or valet
assistant, inform him/her of the
EPB operation.
The EPB may malfunction if you drive with the EPB set.
Gradually depress the accelera- tor, when you want to automati-
cally release EPB by depressing
it.
EPB malfunction indicator
This warning light illuminates when
the Engine Start/Stop button is
turned ON and OFF in approximate-
ly 3 seconds, even though the sys-
tem normally operates.
If the EPB malfunction indicator
remains ON, flash, or does not illumi-
nate, when turning ON the Engine
Start/Stop button, this indicates the
malfunction of the EPB.
If this occurs, immediately have your
vehicle checked by an authorized
EQUUS dealer.
The EPB malfunction indicator may
illuminate, when the ESC malfunc-
tion indicator illuminates. In this
case, it does not indicate the EPB
malfunction.
NOTICE
5-21
Driving your vehicle05
To prevent unintentional vehi-cle movement when parking
or after leaving the vehicle, do
not substitute setting of the
parking brake with setting of
the shift lever. Set the parking
brake and secure to position
the shift lever in P(Park).
Never allow anyone, who is unfamiliar with the vehicle, to
touch the EPB switch. If the
EPB is unintentionally
released, serious injury may
occur.
All vehicles must always set the parking brake, while park-
ing, in order to avoid inadver-
tent vehicle movement, which
may injure occupants or
passers-by.
WARNING
OVI055111N

Hill-start assist control (HAC)
A vehicle has the tendency to slide
backwards on a steep slope, when the
driver begins to accelerate after a
stop. The HAC prevents the vehicle
from sliding backwards by automati-
cally operating the brake systems for
about 2 seconds. The brake systems
are automatically released, when the
accelerator pedal is depressed or after
about 2 seconds.
Information
• The HAC does not operate when theshift lever is in P(Park) or
N(Neutral).
• The HAC activates, even when the ESC is OFF. However, it does not
activate, when the ESC malfunc-
tions.
Good braking practices
Make sure the parking brake isreleased and that the parking
brake indicator goes OFF before
driving.
Driving through water may get the brakes wet. The brakes may also
get wet after washing the vehicle.
Wet brakes can be dangerous!
Your vehicle may not quickly stop,
when the brakes are wet. Wet
brakes may cause the vehicle to
slide to one side.
To dry the brake, lightly depress
the brake pedal until the braking
operation returns to normal, taking
care to keep the vehicle under con-
trol at all times. When the braking
operation does not return to nor-
mal, immediately and safely stop
the vehicle and call an authorized
EQUUS dealer for assistance.i
5-32
Driving your vehicle
The HAC is activated only for
about 2 seconds, so always
depress the accelerator pedal
to begin driving upwards after a
stop.
WARNING
Whenever parking or leaving the vehicle, always securely
set the parking brake and
locate the vehicle's shift lever
in P(Park). A vehicle, of which
the shift lever is not in P(Park)
with the parking brake set ON,
is at risk of inadvertently mov-
ing and injuring you or others.
All vehicles should always set the parking brake, when park-
ing, to avoid inadvertent
movement, which may injure
occupants or pedestrians.
WARNING

5-81
Driving your vehicle05
Overloading may damage yourvehicle. Repairs are not covered
by your warranty. Do not over-
load your vehicle.
Heavier suspension compo- nents for higher durability may
not change the weight capacity.
Ask your dealer to help you load
your vehicle the right way.
NOTICE
Overloading your vehicle mayoverheat the tires and cause
tire failure, possibly leading to
a crash.
Overloading your vehicle may increase a stopping distance,
possibly leading to a crash.
A crash, which is resulted from poor handling, vehicle
damage, tire failure, or a
longer stopping distance, may
result in a serious injury or
death.
WARNING
- Unsecured loads
Items you carry inside your
vehicle may hit and injure an
occupant in a sudden stop or
turn, or in a crash.
Put items in the trunk. Try toevenly spread the weight.
Never stack up items, like suitcases, inside the vehicle,
especially above the seat-
backs.
Do not leave an unsecured child restraint in your vehicle.
When you carry something inside the vehicle, secure it.
WARNING

If engine stalls while driving
1.Gradually reduce your drivingspeed while driving straight ahead.
Cautiously drive off the road to a
safe place.
2.Press the emergency hazard flash- er.
3.Try to re-start the engine again. When your vehicle does not re-
start, contact an authorized
EQUUS dealer for the qualified
assistance.When the engine does not
revolve, or slowly revolves
1.Make sure that the shift lever is inN(Neutral) or P (Park), and the
emergency brake is set.
2.Check that the battery connections are clean and tight.
3.Turn ON the interior light. When the light dims or goes out upon operat-
ing the starter, the battery is dis-
charged.
4.Check that the starter connections are securely tightened.
5.Do not push or pull the vehicle to start it. Follow instructions provided
in "Jump starting".
When the engine normally
revolves, but does not start
1.Check the fuel level.
2.With the Engine Start/Stop Buttonin the OFF position, check all con-
nectors of the ignition coils and the
spark plugs. Reconnect any dis-
connected or loose parts.
3.If the engine still does not start, contact an authorized EQUUS
dealer for the qualified assistance
6-3
What to do in an emergency06
I IF
F
T
T H
H E
E
E
E N
N G
GI
IN
N E
E
W
W I
IL
L L
L
N
N O
O T
T
S
S T
T A
A R
RT
T
When the engine does not start,
do not push or pull the car to
start it. This may result in a col-
lision or cause other damage.
CAUTION

8.Insert the jack handle into the jack,turn it in a clockwise direction, and
raise the vehicle until the tire just
lifts above the ground. This would
be approximately 30 mm (1.2 in).
Before removing the wheel lug
nuts, make sure that the vehicle is
stationary without a possibility of
any movement or skid.
9.Loosen the wheel nuts and then remove them with your fingers.
Slide the wheel off the studs and
lay it on a flat ground to prevent
rolling away. To install the wheel on
the hub, pick up the spare tire, fit
the studs into the holes, and screw
them. When it is difficult, slightly tip
the wheel, fitting the top wheel hole
with its top stud. Then, shake the
wheel back and forth until the
wheel slide off other studs. 10. To reinstall a wheel, fit its hole
onto the studs, screw the wheel
nuts, and tighten them. The nuts
should be screwed with a small-
diameter end in an inward direc-
tion. Lightly jiggle the tire to
check its secure installment. If
necessary, tighten the nuts with
your fingers again.
11. Lower the vehicle onto the ground by rotating the wheel nut
wrench in a counterclockwise
direction.
6-15
What to do in an emergency06
Wheels may have sharp edges.
Carefully handle them to avoid a
possible severe injury. Before
installing wheels into place,
dust off any substances from
the hub or wheel (i.e. mud, tar,
gravel, etc., which may stick
solid against the hub).
When a wheel is unsecurely or
loosely installed on the hub, the
wheel nuts may become loose,
causing loss of a wheel. Loss of
a wheel may result in loss of
vehicle control, causing a seri-
ous injury or death.
WARNING
OVI065101N

Put the wrench as shown in the
above illustration, and tighten the
wheel nuts. Make sure the sockets
are completely tightened over the
nuts. Do not step on the wrench han-
dle, neither use an extension pipe
over the wrench handle. Go around
the wheel nuts to securely tight.
Then, double-check the tightness of
each nut. After changing wheels by
yourself, immediately have an
authorized EQUUS dealer tighten
the wheel nuts with a proper torque.
Wheel nut tightening torque:
Steel wheel & aluminum alloy wheel:
65~79 lb·ft (9~11 kg·m)
When you have a tire gauge, remove
the valve cap and check the air pres-
sure. When it is under-inflated than
recommended, slowly drive to the
nearest service station and inflate
the tire to the correct pressure. When
it is over-inflated, deflate the tire to
the proper pressure. Always close
the valve cap after checking or
adjusting a tire pressure. When the
cap is not closed, air may leak out
from the tire. When you lose a valve
cap, immediately buy a new one and
close the valve.After changing a wheel, always put
the flat tire in place and place the
jack and other tools in the proper
storage locations.
6-16
What to do in an emergency
OVI065011N
When your vehicle uses metric
threads for the wheel studs and
nuts, the same nuts should be
used after removal - or, if
replaced, the nuts of the same
metric threads and the chamfer
configuration are used.
Tightening a non-metric thread
nut on a metric stud or vice
versa may lead to a loose wheel
securement to the hub, damag-
ing the stud and requiring
another stud/nut replacement.
Note that most lug nuts do not
have metric threads. Pay
extreme attention to the thread
type when installing the lug
nuts or wheels, which are not
yet authorized. When in doubt,
consult an authorized EQUUS
dealer.
CAUTION
- Wheel studs
When a stud is damaged, it may
lose its ability to retain a wheel.
This may lead to loss of the
wheel and a collision, resulting
in a serious injury.
WARNING

Towing service
If necessary, we recommend towing
your vehicle by an authorized
EQUUS dealer or a commercial tow-
truck service. Proper lifting and tow-
ing procedures are necessary to pre-
vent damage to your vehicle. The use
of wheel dollies or flatbed is recom-
mended.
It is acceptable to tow the vehicle
with the rear wheels off the ground,
while dragging the front wheels
(without a dolly).
When any of the loaded wheels or
suspension components is dam-
aged, or when the rear wheels have
the possibility of dragging on the
ground, use a towing dolly under the
rear wheels.
When the wheel dolly is not
equipped in a tow truck, must lift the
rear wheels, not the front wheel.
Information
When you tow the vehicle as shown in
the illustration (A), the cable should
be secured to the vehicle towing hook
as shown in the illustration (1).
When you use chains or cables to lash
down your vehicle, the lashing angle
must be 45°, as shown in the illustra-
tion (2).
Do not over-tighten the lashing strap
or cables. Otherwise, this may damage
your vehicle.
i
6-20
What to do in an emergency
T TO
O W
W I
IN
N G
G
OVI065012N
A
B
C dollyOVI065022L