speed HYUNDAI I10 2021 Service Manual

6-52
Whilst driving
Emergency braking
(Second warning)
2$&78
This warning message appears on
the LCD display with a warning
chime. Additionally, some vehicle
system intervention occurs by the
engine management system to help
decelerate the vehicle.
 7KHEUDNHFRQWUROLVPD[LPLVHGMXVW
before a collision, reducing impact
when it strikes a forward vehicle.
- It will operate if the vehicle speed is
JUHDWHU WKDQ  PSK  NPK DQG
OHVV WKDQ RU HTXDO WR  PSK 
km/h) on a forward vehicle.
(Depending on the condition of the
vehicle ahead and the environment
surrounding it, the possible maxi-
mum operating speed may be
reduced.)
- For pedestrians, the vehicle speed
is greater than or equal to 6 mph
NPKDQGOHVVWKDQPSK
km/h). (Depending on the condition
of pedestrians and the surrounding
environment the possible maximum
operating speed may be reduced.)
- If you select ‘Warning only’, FCA
system activates and produces
only warning alarms in accordance
with the collision risk levels. You
should control the brake directly
because FCA system do not control
the brake.
The others

6-53
06
WARNING
The braking control cannot com-
pletely stop the vehicle nor avoid
all collisions. The driver should
hold the responsibility to safely
drive and control the vehicle.
WARNING
FCA system logic operates within
certain parameters, such as the
distance from the vehicle or pedes-
trian ahead, the speed of the vehi-
cle ahead, and the driver’s vehicle
speed. Certain conditions such as
inclement weather and road condi-
tions may affect the operation of
FCA system.
WARNING
Never deliberately drive danger-
ously to activate the system.
FCA sensor (front view
camera)
2$&78
In order for FCA system to operate
properly, always make sure the sen-
sor or wind shield glass is clean and
free of dirt, snow, and debris.
Dirt, snow, or foreign substances may
adversely affect the sensing perfor-
mance of the sensor.
NOTICE

6-69
06
Speed limit assist operation
You can set the speed limit when you
do not want to drive over a specific
speed.
If you drive over the preset speed
limit, the warning system operates
(set speed limit will blink and chime
will sound) until the vehicle speed
returns within the speed limit.
i Information
Whilst speed limit control is in opera-
tion, the cruise control system cannot
be activated.
Speed limit control switch
2$,
&KDQJHV PRGH EHWZHHQ
cruise control system and
speed limit control system.
System off
Speed Limit ControlCruise Control
5(65HVXPHVRULQFUHDVHVVSHHG
limit control speed.
6(76HWV RU GHFUHDVHV VSHHG OLPLW
control speed.
&DQFHO&DQFHOVVHWVSHHGOLPLW
To set speed limit
2$,
3UHVVWKH button to turn the
system on. The speed limit (
or
) indicator on the instrument
cluster will illuminate.
2$,
3XVKWKHWRJJOHVZLWFKGRZQ6(7
and release it.
MANUAL SPEED LIMIT ASSIST
ãMSLA
ä
ãIF EQUIPPED
ä

6-70
Whilst driving
2$,
2$,
‡3XVKWKHWRJJOHVZLWFKXS5(6
or down (SET-), and release it at
the desired speed.


6-71
06
To turn off the speed limit con-
trol, do one of the following:
2$,

6-72
Whilst driving
2$&78
Intelligent Speed Limit Warning sys-
tem displays the speed limit informa-
tion and overtaking restriction of the
current road through the instrument
cluster and the navigation. ISLW
reads the traffic signs through the
front view camera, which is attached
on the upper part of the inner front
windscreen.
ISLW also utilizes the navigation and
vehicle information to display the
speed limit information.
WARNING

6-74
Whilst driving

:7/
„No reliable speed limit information
Additional road signs

6-76
Whilst driving
2$&78
Check SLW (Speed Limit Warning)
system
The warning message appears for a
few seconds, when ISLW does not
properly operate. Then, the master
warning light (
) will illuminate.
We recommend that you have the
system checked by a HYUNDAI
authorised repairer.
/LPLWDWLRQVRIWKHV\VWHP
ISLW may not operate properly or
may not provide correct information
in the following situations.
When the traffic sign condition is
poor

6-83
0606
Cruise Control operation
2$&5
„Type A
2$&5
&58,6(LQGLFDWRU
(2) Set speed
The Cruise Control system allows
\RXWRGULYHDWVSHHGVDERYHPSK
 NPK ZLWKRXW GHSUHVVLQJ WKH
accelerator pedal.
WARNING
Take the following precautions:

6-84
Whilst driving
i Information
‡ 'uring normal cruise control opera-
tion, when the SE7 switch is activat-
ed or reactivated after applying the
brakes, the cruise control will acti-
vate after approximately 3 seconds.
7his delay is normal.
‡ Before activating the cruise control
function, the system will check to
verify that the brake switch is oper-
ating normally. 'epress the brake
pedal at least once after turning 21
the ignition or starting the vehicle.
Cruise control switch
2$,
CRUISE/7XUQV FUXLVH FRQ-
trol system on or
off.
5(65HVXPHVRULQFUHDVHVFUXLVH
control speed.
6(76HWVRUGHFUHDVHVFUXLVHFRQ-
trol speed.
&$1&(/&DQFHOV FUXLVH FRQWURO
operation.
To set Cruise Control speed
2$,
3XVK WKH &58,6( button
on the steering wheel to turn the
system on. The CRUISE/

indicator on the LCD display will
illuminate.
2. Accelerate to the desired speed,
ZKLFK PXVW EH PRUH WKDQ  PSK
NPK
i Information
For manual transmission vehicles, you
should depress the brake pedal at least
once to set the cruise control after
starting the engine.