sensor HYUNDAI IONIQ 6 2023 Owner's Guide
[x] Cancel search | Manufacturer: HYUNDAI, Model Year: 2023, Model line: IONIQ 6, Model: HYUNDAI IONIQ 6 2023Pages: 582, PDF Size: 10.77 MB
Page 245 of 582
5
5-67
Lighting
Exterior Lights
Lighting control
To operate the lights, turn the knob at the
end of the control lever to one of the
following positions:
B5015601
1. OFF
2. AUTO headlight
3. Parking light
4. Headlight
Daytime Running Light (DRL)
The Daytime Running Lights (DRL) can
make it easier for others to see the front
of your vehicle during the day, especially
after dawn and before sunset.
The DRL system will turn the dedicated
light OFF when :
• The headlights are ON.
• The parking brake is applied.
• The vehicle is turned off.
B5015602
AUTO headlight
The parking light and headlight will be
turned ON or OFF automatically
depending on the amount of daylight as
measured by the ambient light sensor (1)
at the upper end of the windshield glass.
Even with the AUTO headlight feature in
operation, it is recommended to manually
turn ON the headlights when driving at
night or in a fog, driving in the rain, or
when you enter dark areas, such as
tunnels and parking facilities.
NOTICE [ ' R Q R W F R Y H U R U V S L O O D Q \ W K L Q J R Q W K H V H Q V R U \f O R F D W H G D W W K H X S S H U H Q G R I
W K H Z L Q G V K L H O G J O D V V
[ ' R Q R W F O H D Q W K H V H Q V R U X V L Q J D Z L Q G R Z F O H D Q H U W K H F O H D Q V H U P D \ O H D Y H D O L J K W
I L O P Z K L F K F R X O G L Q W H U I H U H Z L W K V H Q V R U
R S H U D W L R Q
[ , I \ R X U Y H K L F O H Z L Q G R Z L V W L Q W H G R U R W K H U W \ S H V R I P H W D O O L F F R D W L Q J D U H R Q W K H
I U R Q W Z L Q G V K L H O G W K H $ 8 7 2 K H D G O L J K W
V \ V W H P P D \ Q R W Z R U N S U R S H U O \
AUTO
1
Hyundai_CE_en_US.book Page 67
Page 250 of 582
Convenience Features
5-72
if equipped
Vanity Mirror Lamp
B5018501
Push the switch to turn the lamp on or off.
• :The lamp will turn on if this button is
pressed.
• : The lamp will turn off if this button is
pressed.
NOTICE $ O Z D \ V K D Y H W K H V Z L W F K L Q W K H R I I S R V L W L R Q
Z K H Q W K H Y D Q L W \ P L U U R U O D P S L V Q R W L Q X V H
, I W K H V X Q Y L V R U L V F O R V H G Z L W K R X W W K H O L J K W
R I I L W P D \ G L V F K D U J H W K H E D W W H U \ R U
G D P D J H W K H V X Q Y L V R U
Glove Box Lamp
B5018601
Opening the glove box comes on the
lamp. When the glove box is not closed
completely, the lamp may keep coming
on.
Mood Lamp
Dashboard mood lamp
B5018701Door mood lamp
B5018702
• To set the brightness and color of the
mood lamp, select Setup > Vehicle >
Lights > Ambient Light in the
infotainment system.
• When driving at night or under low light driving conditions, the sensors detect
the light level around the vehicle and
automatically adjust the brightness of
the mood light. To set the automatic
brightness adjustment turn on/off,
select Setup > Vehicle > Lights >
Ambient Light > Dimmed in Dark .
• When you select Setup > Vehicle >
Lights > Ambient Light > Link to Drive
Mode in the infotainment system, the
driver's and front passenger’s mood
lamps are set in color in conjunction
Hyundai_CE_en_US.book Page 72
Page 252 of 582
Convenience Features
5-74
if equipped
High Beam Assist (HBA)
B5016701
High Beam Assist automatically controls
the headlights between high beam and
low beam depending on the detected
ambient light, such as an oncoming
vehicle or leading vehicle.
Detecting sensor
B5016702(1) front view camera
The front view camera is used as a
detecting sensor to detect ambient light
and brightness while driving.
Refer to the illustration above for the
detailed location of the detecting sensor.
NOTICE [ $ O Z D \ V N H H S W K H I U R Q W Y L H Z F D P H U D L Q J R R G F R Q G L W L R Q W R P D L Q W D L Q R S W L P D O
S H U I R U P D Q F H R I + L J K % H D P $ V V L V W
[ ) R U P R U H L Q I R U P D W L R Q R Q W K H S U H F D X W L R Q V R I W K H I U R Q W Y L H Z F D P H U D U H I H U W R W K H U ) R U Z D U G
& R O O L V L R Q $ Y R L G D Q F H $ V V L V W ) & $ \fV
V H F W L R Q L Q F K D S W H U
High Beam Assist Settings
Setting features
ONE1051248L
With the Start/Stop button in the ON
position, select Setup > Vehicle > High
Beam Assist from the Settings menu to
turn on High Beam Assist and deselect to
turn off the function.
WARNING For your safety, change the Settings after
parking the vehicle at a safe location.
High Beam Assist Operation
Display and control
• After selecting 'High Beam Assist' in
the Settings menu, High Beam Assist
will operate by following the procedure
below.
- Place the headlight switch in the AUTO position and push the
headlight lever towards the
instrument cluster. The High Beam
Assist ( ) indicator light will
illuminate on the instrument cluster
1
Hyundai_CE_en_US.book Page 74
Page 255 of 582
5
5-77
Wipers and Washers
B5019601
A. Wiper speed control
• MIST - Single wipe
• OFF - Off
• INT - Intermittent wipeAUTO* - Auto control wipe
• LO - Low wiper speed
• HI - High wiper speed
B. Intermittent wipe time
adjustment/Auto control wipe time
adjustment*
C. Wash with brief wipes
*: if equipped
Front Windshield Wipers
Operates as follows when the Start/Stop
button is in the ON position.
MIST:
For a single wiping cycle, push the lever
upward (or downward) and release. The
wipers will operate continuously if the
lever is held in this position.
OFF:
Wiper is not in operation.
INT:
Wiper operates intermittently at the same
wiping intervals. To vary the speed
setting, turn the speed control knob (B).
AUTO:
The rain sensor located on the upper end
of the windshield glass senses the amount of rainfall and controls the wiping
cycle for the proper interval. The more it
rains, the faster the wiper operates. When
the rain stops, the wiper stops. To vary the
speed setting, turn the speed control
knob.
LO:
The wiper runs at a lower speed.
HI:
The wiper runs at a higher speed.
Information If there is heavy accumulation of snow or ice
on the windshield, defrost the windshield for
about 10 minutes, or until the snow and/or ice
is removed before using the windshield wipers
to ensure proper operation.
If you do not remove the snow and/or ice
before using the wiper and washer, it may
damage the wiper and washer system.
AUTO (Automatic) control
B5019603
The rain sensor located on the upper end
of the windshield glass senses the
amount of rainfall and controls the wiping
cycle for the proper interval.
The wiper operation time will be
automatically controlled depends on
rainfall.
When the rain stops, the wiper stops.
To vary the sensitivity setting, turn the
sensitivity control knob.
MIST
OFFOFF
INT/AUTO*INT/AUTO*
LO
HI
Hyundai_CE_en_US.book Page 77
Page 256 of 582
Convenience Features
5-78
If the wiper switch is set in AUTO mode
when the Start/Stop button is in the ON
position, the wiper will operate once to
perform a self-check of the system. Set
the wiper to the OFF position when the
wiper is not in use.
WARNING To avoid personal injury from the
windshield wipers, when the vehicle is
running and the windshield wiper switch
is placed in the AUTO mode:
• Do not touch the upper end of the windshield glass facing the rain sensor.
• Do not wipe the upper end of the windshield glass with a damp or wet
cloth.
• Do not put pressure on the windshield glass.
NOTICE [ : K H Q Z D V K L Q J W K H Y H K L F O H V H W W K H Z L S H U V Z L W F K L Q W K H 2 ) ) S R V L W L R Q W R V W R S
W K H D X W R Z L S H U R S H U D W L R Q 7 K H Z L S H U
P D \ R S H U D W H D Q G E H G D P D J H G L I W K H
V Z L W F K L V V H W L Q W K H $ 8 7 2 P R G H Z K L O H
Z D V K L Q J W K H Y H K L F O H
[ ' R Q R W U H P R Y H W K H V H Q V R U F R Y H U O R F D W H G R Q W K H X S S H U H Q G R I W K H
S D V V H Q J H U V L G H Z L Q G V K L H O G J O D V V
' D P D J H W R V \ V W H P F R P S R Q H Q W V F R X O G
R F F X U D Q G P D \ Q R W E H F R Y H U H G E \ \ R X U
Y H K L F O H Z D U U D Q W \
[ % H F D X V H R I X V L Q J D S K R W R V H Q V R U W H P S R U D U \ P D O I X Q F W L R Q F R X O G R F F X U
D F F R U G L Q J W R V X G G H Q D P E L H Q W O L J K W
F K D Q J H P D G H E \ V W R Q H D Q G G X V W Z K L O H
G U L Y L Q J
Front Windshield Washers
B5019701
In the OFF position, pull the lever gently
toward you to spray washer fluid on the
windshield and to run the wipers 1-3
cycles. The spray and wiper operation will
continue until you release the lever. If the
washer does not work, you may need to
add washer fluid to the washer fluid
reservoir.
Recirculating air when washer fluid
is used
When washer fluid is used, in order to
reduce any objectionable scent of the
washer fluid from entering the cabin,
recirculation mode and air conditioning
are automatically activated depending on
the outside temperature. If you select
fresh mode while the function is
operating, the function will resume after a
certain amount of time. It may not work in
some conditions such as cold weather or
vehicle off.
For more information, refer to the
“Climate Control Additional Features”
section in this chapter.
WARNING When the outside temperature is below
freezing, ALWAYS warm the windshield
using the defroster to help prevent the
washer fluid from freezing on the
windshield and obscuring your vision
which could result in an accident and
serious injury or death.
Hyundai_CE_en_US.book Page 78
Page 289 of 582
6
6. Driving Your Vehicle
Before Driving .................................................................................................................. 6-3Before Entering the Vehicle ........................................................................................ 6-3Before Starting ............................................................................................................. 6-3
Start/Stop Button ............................................................................................................ 6-4 Start/Stop Button Positions ........................................................................................ 6-5Starting the Vehicle .....................................................................................................6-6
Turning Off the Vehicle................................................................................................ 6-7
Remote Start ................................................................................................................ 6-7
SHIFT BY WIRE.................................................................................................................6-8 Shift By Wire Operation ...............................................................................................6-8
Cluster Display Messages Information......................................................................6-12
Good Driving Practices .............................................................................................. 6-13
Regenerative Braking System (Paddle Shifter) ........................................................... 6-14 Using Regenerative Braking System ........................................................................ 6-14
Regenerative Braking System Limitations ............................................................... 6-15
One Pedal Driving ...................................................................................................... 6-15
Using i-PEDAL ............................................................................................................ 6-16
Smart Regeneration System .......................................................................................... 6-17 Smart Regeneration System On/Off..........................................................................6-17
Smart Regeneration System Operating Condition .................................................. 6-18
Smart Regeneration Level Settings .......................................................................... 6-18
Pausing Smart Regeneration System ....................................................................... 6-19
Front Sensors ............................................................................................................. 6-19
System Check Message............................................................................................. 6-19
Smart Regeneration System Precautions ................................................................ 6-19
Braking System .............................................................................................................. 6-22 Power-Assist Brakes .................................................................................................. 6-22
Disc Brakes Wear Indicator ....................................................................................... 6-23
Electronic Parking Brake (EPB) ................................................................................. 6-24
Auto Hold.................................................................................................................... 6-27
Brake Disc Cleaning ...................................................................................................6-29
Anti-Lock Brake System (ABS) ..................................................................................6-30
Electronic Stability Control (ESC) ............................................................................. 6-31
Vehicle Stability Management (VSM) ....................................................................... 6-33
Hill-Start Assist Control (HAC) ..................................................................................6-34
Brake Assistant System (BAS) ...................................................................................6-34
Hyundai_CE_en_US.book Page 1
Page 307 of 582
6
6-19
To change the default level of the smart
regeneration system, pull the right paddle
shifter ( ) once while the system is on.
Smart regeneration intensity setting
Regenerative braking intensity of the
smart regeneration system can be
adjusted to match the driver’s
preference. Adjust the braking intensity
makes the decelerating faster or slower.
B6001903
To adjust the regenerative braking level of
the smart regeneration system, go to
Setup > EV > Smart Regeneration
System from the infotainment system.
Pausing Smart Regeneration
System
The smart regeneration system is
temporarily turned off in the following
conditions. While the system is turned off,
the driver must keep eyes on the road and
depress the brake pedal to decelerate.
• The gear is shifted to N (Neutral), R
(Reverse) or P (Park)
• Smart Cruise Control is ON
• ESC (Electronic Stability Control) is operating
• ABS is operating
Front Sensors
B6003001(1) Front radar
(2) Front corner radar
Front sensors recognize the distance
from the vehicle ahead to control the
regenerative braking intensity. If the
sensor is covered with snow, rain, or other
foreign substances, the performance of
the sensors may deteriorate, and the
smart regeneration system may turn off.
Always keep the sensors clean.
System Check Message
B6003101
When the front radar is covered or
blocked, the smart regeneration system
may be temporarily disabled. The 'Check
Smart Regeneration System' warning
message may appear, and the
regenerative braking level is displayed on
the instrument cluster.
The system operates normally when such
foreign material is removed, and the
system is turned on by pulling and
2
2
1
$ I F D L 4 N B S U
3 F H F O F S B U J P O 4 Z T U F N
Hyundai_CE_en_US.book Page 19
Page 308 of 582
Driving Your Vehicle
6-20
holding the right paddle shifter ( ) for
over one second.
If the smart regeneration system does not
operate normally after the sensor has
been uncovered or unblocked, have the
vehicle inspected by an authorized
HYUNDAI dealer.
Smart Regeneration System
Precautions
• Always monitor the distance to vehicles ahead on the road. The smart
regeneration system is not a substitute
for safe driving practices, but a
supplemental function only.
• Always maintain a safe distance from the vehicles ahead and adjust your
vehicle speed to the road conditions.
The smart regeneration system may not
recognize unexpected and sudden
situations or complex driving
situations.
General precautions
• Always maintain a safe distance from the vehicles ahead and adjust your
vehicle speed depending on the road
conditions.
• Always prepare for unexpected situations and depress the brake pedal
to decelerate when necessary. The
smart regeneration system cannot
react to pedestrians, vehicles making a
sudden stop and vehicles coming from
the opposite lane.
• If the vehicle ahead frequently changes the lane, keep your eyes forward to be
prepared for hazardous situations. In
this case, the smart regeneration
system may respond late and may
inappropriately respond to vehicle
movements from the side lanes.
• The driver must depress the brake pedal when stopping the vehicle.
• Depress the brake pedal to decelerate in the following conditions when: - The front part of the vehicle is lifted
up because of the cargo loaded on
the rear part of the vehicle.
- You are operating the steering wheel.
- You are not driving in the center of the lane.
- You are driving on a narrow or curved road.
• The smart regeneration system may be temporarily turn off when exposed to
strong electromagnetic waves.
• If the vehicle starts coasting near the speed camera and engages the brake
with the smart regeneration system,
the vehicle may not be able to keep the
speed limit. Always comply with the
road and traffic law.
Sensor precautions
• Never disassemble the radar or radar assembly, and never apply any impact
on it.
• If there is impact on or near the radar, the sensors may be damaged or not be
properly aligned near the radar, even
though a warning message does not
appear on the instrument cluster, the
Smart Regeneration System may not
operate properly. Have the vehicle
inspected by an authorized HYUNDAI
dealer.
• If the radars have been replaced or repaired, have the vehicle inspected by
an authorized HYUNDAI dealer.
• Use only genuine parts to repair the bumper where the radar is located.
• Do not install a license plate frame or other objects such as bumper sticker,
film, bumper guard, or bumper wrap
near the radar.
• The Smart Regeneration System may not work properly if the bumper has
been replaced, or the surroundings of
the radar has been damaged or
painted.
Hyundai_CE_en_US.book Page 20
Page 309 of 582
6
6-21
• Do not spray the sensors or the surrounding area directly with high
pressure water.
Detecting vehicle
• The front sensors may not detect the vehicle ahead or may suddenly detect
the vehicle ahead, such as when the
smart regeneration system responds
slowly, when driving on a hill ends, or
when driving through a curve. The
regenerative braking intensity may
increase and decelerate your vehicle.
• Some vehicles in your lane may not be detected by the sensors:
B6003201
- Narrow vehicles such as motorcycles or bicycles
- Vehicles offset to one side
- Slow-moving vehicles or sudden decelerating vehicles
- Vehicles with small rear profile such as trailers with no loads
• When a vehicle in front of you merges out of the lane, the front sensors may
not detect the new stopped vehicle that
is now in front of your vehicle. Driving on curves
• The front sensors may not detect the
vehicle ahead if you are coasting on a
curve. The regenerative braking
intensity may automatically decrease
and accelerate the vehicle.
B6003202
• On curves, if a vehicle is detected in an adjacent lane, the regenerative braking
intensity may increase and decelerate
your vehicle.
B6003203
• If the front sensors suddenly detect the vehicle ahead, the regenerative braking
intensity may increase and decelerate
your vehicle.
Hyundai_CE_en_US.book Page 21
Page 310 of 582
Driving Your Vehicle
6-22
Driving on hills
B6003204
When coasting uphill or downhill, the
front sensors may not detect the vehicle
ahead or suddenly detect the vehicle
ahead at the end of the incline or at the
point where the incline changes. The
regenerative braking intensity is adjusted
automatically changing your vehicle
speed. Brake as needed to reduce your
driving speed.
Changing lanes
B6003205
• When a vehicle moves into your lane from an adjacent lane, it cannot be
detected by the sensors until it is in the
sensor's detection range.
• The smart regeneration system may not immediately detect the vehicle when
your vehicle changes lanes abruptly.
Braking System
Power-Assist Brakes
Your vehicle has power-assisted brakes
that adjust automatically through normal
usage.
In the event of a vehicle power failure, the
power assist for the brakes will not work.
You can still stop your vehicle, but it will
require greater force and increased pedal
travel than normal. The stopping
distance, however, will be longer than
with power brakes.
Information • When the brake pedal is depressed under certain driving conditions or weather
conditions, you may temporarily hear a
noise. This is normal and does not indicate
a problem with your brakes.
• While driving on a road with deicing chemicals, brake noise or abnormal tire
wear may occur due to deicing chemicals.
In a safe traffic condition, additionally
apply the brakes to remove deicing
chemicals on the brake discs and pads.
WARNING Take the following precautions:
• Do not drive with your foot resting on the brake pedal. This will create
abnormal high brake temperatures,
excessive brake lining and pad wear,
and increased stopping distances. So
increase the regeneration braking level
with the left paddle shifter to decrease
the speed.
• When descending down a long or steep hill, use the paddle shifter to increase
the regeneration braking level in order
to decrease your speed without using
the brake pedal excessively. Applying
the brakes continuously will cause the
Hyundai_CE_en_US.book Page 22