display Hyundai Ioniq Hybrid 2017 Multimedia Manual

Navigation Settings I 6-33
06
Navigation Settings
General
Change general settings.
NameDescription
UnitChange the unit of mile, km .


Show Previous
Destinations
after Navigation
Start-Up Select the
On, Off button to
change the previous
destination view set-
ting when starting
the navigation.
GPS Information Check the GPS
information.

Restore factory
settings Select the Restore
factory settings but-
ton to initialize.
Select the GPS Information to display the
detail GPS satellites information.
Name Description
ReceivingActive when current posi-
tion is being calculated.
SpeedDisplay current speed of
the vehicle.
LocationDisplay current position of
the vehicle.
ElevationDisplay current elevation
of the vehicle.
Time
Display time.
DateDisplay date.
Display
Change the display map settings.
Change the map colors and the route
guidance line colors.
Change the vehicle symbol.
)@"&
)&7
@(<64"@&6>"7/@1"35JOEE


 )@"&
)&7
@(<64"@&6>"7/@1"35JOEE


 

6-34 I Navigation
Guidance
Change the guidance setting.
NameDescription
Number of
Guidance
Prompts Set the frequency of
guidance.
FewerRoute guidance is given
less frequently.
More
Guidance will be pro-
vided frequently.
Curve Alert Change whether to turn
curve alert On and Off.
Speed LimitChange whether to show
speed limit by pressing On and Off.
Route
Change the route setting.
Select the On or Off button to change
the Alternative Routes setting.

•
Alternative on: Alternative routes will
be suggested (depending on the route
preference between “Faster time” and
“Shorter Distance”).
NOTICE
Alternative routes can be shown only while
the v
ehicle is not moving.

•
Alternative off: No alternative routes will
be suggested. Guidance will start right
after calculating with the route prefer-
ence (Faster time or Shorter distance).
Tr a f fi c
Change the traffic information setting.
Select the On or Off button to change
the settings.

•
Show Traffic Information On/Off: Select
whether to display traffic information or
not.

•
Traffic Event Pop-up Freeway On/Off:
Select whether to display Pop-up mes-
sage for traffic information on freeway.

•
Traffic Event Pop-up Surface Road On/
Off: Select whether to display Pop-up
message for traffic information on sur-
face road.
)@"&
)&7
@(<64"@&6>"7/@1"35JOEE


 )@"&
)&7
@(<64"@&6>"7/@1"35JOEE


 

Troubleshooting I 6-35
06
Troubleshooting
The current position as shown on the navigation may differ from
the actual position under the following conditions.
The following occurrences are not malfunctions:

•
When driving on Y-shaped roads
with narrow angles the current
position may be displayed in the
opposite direction

•
Within city streets, the current posi-
tion may be displayed on the oppo-
site side or on an off-road position

•
When changing the zoom level
from maximum to a different level,
the current position may become
displayed on a different road

•
If the vehicle is loaded onto a ferry
or a car transport vehicle, the cur-
rent position may become stalled
on the last position prior to loading

•
When driving on a spiral-shaped
road

•
When driving in mountain regions
with sharp turns or sudden brakes

•
When entering a road after passing
an underground parking structure,
building parking structure, or roads
with many rotations

•
When driving in heavy traffic with
frequent starts and stops
•
When driving under slippery condi-
tions, such as heavy sand, snow, etc.

•
When driving on spiral-shaped roads

•
When the tires have recently been
replaced (Especially upon use of
spare or studless tires).

•
When using tires of improper size

•
When the tire pressure for the 4 tires
are different

•
When the replacement tire is worn or
used (Especially studless tires having
passed a second season).

•
When driving near high-rise buildings

•
When a roof carrier has been installed

•
When a long distance route is calcu-
lated while driving on an expressway
In such cases, continued driving will
automatically enable the system
to conduct map matching or use
updated GPS information to provide
the current position (In such cases, up
to several minutes may be required)
Correct route guidance may not occur due to search conditions or
driving position.
The following occurrences are not malfunctions:

•
Guidance to go straight may be
given while driving on a straight
road

•
Guidance may not be given even
when having turned at an inter-
section

•
There are certain intersections in
which guidance may not occur

•
A route guidance signaling for
a u-turn may occur in some No
u-turn intersections
•
Route guidance signaling
entrance into a No-entry zone
may occur (No-entry zone, road
under construction, etc.)

•
Guidance may be given to a posi-
tion that is not the actual destina-
tion if roads to reach the actual
destination do not exist or are too
narrow

•
Faulty voice guidance may be
given if the vehicle breaks away
from the designated route. (e.g. if
a turn is made at an intersection
while the navigation provided
guidance to go straight.)
These situations may occur after conducting route calculation.
The following occurrences are not malfunctions:

•
Guidance may be given to a
position differing from the current
position when turning at an inter-
section

•
When driving in high speeds,
route recalculation may take a
longer period of time

•
Route guidance signaling for a
u-turn may occur in some No
u-turn intersections
•
Route guidance signaling entrance
into No-entry zone may occur
(No-entry zone, road under construc-
tion, etc.).

•
Guidance may be given to a position
removed from the actual destination
if roads to reach the actual destina-
tion do not exist or are too narrow

•
Faulty voice guidance may be given
if the vehicle breaks away from the
designated route (e.g. If a turn is
made at an intersection while the
navigation provided guidance to go
straight.)
)@"&
)&7
@(<64"@&6>"7/@1"35JOEE


 )@"&
)&7
@(<64"@&6>"7/@1"35JOEE


 

Copyright for Brand Icon Copyright for Brand Icon
The marks of companies displayed by this product to indicate business locations are the marks of their respective owners. The use of
such marks in this product does not imply any sponsorship, approval, or endorsement by such companies of this product.
Copyright for Junction ViewCopyright for Junction View
Junction View Data provided by ZENRIN USA, INC. Copyright(C) 20XX, All rights Reserved.
)@"&
)&7
@(<64"@&6>"7/@1"35JOEE


 )@"&
)&7
@(<64"@&6>"7/@1"35JOEE


 

7-2 I Voice Recognition
What is Voice Recognition?
The voice recognition feature operates the
multimedia system by recognizing voice
commands and enables hands-free oper-
ation of the system while you are driving
your car.
Not all possible voice commands are
recognized by the system due to techno-
logical limitations. To make up for these
limitations, the system displays the voice
commands that are available for you to
use.
There are errors in communication between
people. Likewise, voice recognition some-
times misunderstands your voice command
in some circumstances. If this happens,
either check the screen for the available
options and say the command again, or
manually select and press the button for the
corresponding command on the screen.
Precautions Required
for Successful Voice
Recognition
1. Voice recognition supports only the
commands that are displayed on the
screen and written in the User's Guide.
2. To ensure the correct recognition and
execution of your command, say your
command when you hear the beep after
a voice prompt.
3. Voice recognition automatically ends if:
1) A call is incoming or outgoing
2) A media device (USB or iPod, etc.) is
connected or disconnected
3) The rear view camera is operated
4) The car engine starts or stops
5) A system key, such as
RADIO key
or
MEDIA key is selected
6) An emergency occurs, for example
re-searching for the route after the
navigation route has been lost 4.
The microphone used for the voice
recognition system is located in the
headliner directly above the driver's
head. To make your commands better
understood, keep your body straight
in the driver's seat when speaking the
command.
5. Speaking naturally and clearly will
ensure better recognition of your voice
commands.
6. In the following cases voice recognition
will be affected by ambient noise.
1) The sound of the wind if any window
or the sun roof is open.
2) High speed blower from the air vents.
Set climate control to blow lower
than level 3.
3) Vibrations from passing through a
tunnel.
4) Vibrations from driving on an uneven
road.
5) Storms and heavy rain.
Voice Recognition
)@"&
)&7
@(<64"@&6>"7/@1"35JOEE


 )@"&
)&7
@(<64"@&6>"7/@1"35JOEE


 

7-6 I Voice Recognition
Voice Recognition Screen
Overview
Start Screen
NameDescription
Representative
Commands Displays the repre-
sentative commands.

Not
available
command Displays commands
that are not available
due to a failure in
meeting the condi-
tions for using them
and thus need addi-
tional settings. The
conditions required
for using them will
be described briefly
under each com-
mand.
Name
Description
Voice
recognition
status icons Standby
Voice guidance
Voice command
process

User's
speaking
volume
being
recognized Displays the voice
command volume in
real time.

Recognized
results Displays the voice rec-
ognition result.
Help
Displays all available
help commands in a
tree format.
Exit
Ends the voice recog-
nition.
Help Display
Name
Description
Command
list
•

Shows the available
commands.

•
Select or say a com-
mand to display addi-
tional commands in
detail.
How to
use for
selected
item This section shows how
to use voice recognition
for the selected item.

How to
use in
general This section displays how
to use voice recognition in
general.
)@"&
)&7
@(<64"@&6>"7/@1"35JOEE


 )@"&
)&7
@(<64"@&6>"7/@1"35JOEE





Voice Recognition Screen Overview I 7-7
07
Instructions for Using
Voic e R e cognit ion
NameDescription
Detail
instruction This section describes
how to use voice recog-
nition in detail.
Close button
Closes the screen and
restarts voice recogni-
tion.
Information

In the instructions screen, no voice is
recogniz
ed, so you must manually issue
commands. Because the instructions screen
displays a lot of content, you cannot view it
while driving for safety precautions.
)@"&
)&7
@(<64"@&6>"7/@1"35JOEE


 )@"&
)&7
@(<64"@&6>"7/@1"35JOEE


 

7-8 I Voice Recognition
Voice Commands
Types of Commands
Voice recognition commands are classified as “Global Commands”
and “Local Commands”.
1. Global Commands (
●): Commands that can be used immedi-
ately after activating voice recognition.
2. Local Commands (
○): Commands that can be used when a
multimedia, navigation, or Bluetooth call is running, or displayed
on the screen, after activating voice recognition.
Call Commands
* Check the following before using call commands:
1. Voice commands related to phone calls can be used after con- necting a Bluetooth device.
2. To call a person, for example “Call ” whose name is listed in Contacts, you must first download the Contacts list.
For details on downloading contacts, see “Part 4. Bluetooth >
Chapter 3. Bluetooth Phone > 4.10 Contacts”.
3. After downloading the Bluetooth contacts, it will take some time to convert the Contacts into voice data during which time you
cannot make a call by name yet. The time it takes to convert
voice data may vary depending on the number of Contacts
downloaded on the phone.
Command Operation
●CallDisplays downloaded Contacts, after this
you can make a call by saying the name.
●Call You can directly call a person by
in the downloaded Contacts.
●Call on
MobileYou can call a person directly to
the number that is saved as “Mobile” in
the downloaded Contacts.
e.g.) Call “John Smith” on Mobile
●Call at
WorkYou can call a person directly to
the number that is saved as “Work” in the
downloaded Contacts.
e.g.) Call “John Smith” at Work
●Call at
HomeYou can call a person directly to
the number that is saved as “Home” in the
downloaded Contacts.
e.g.) Call “John Smith” at Home
●Call on
OtherYou can call a person directly to
the number that is saved as other than
“Mobile, Home, or Work” in the down-
loaded Contacts.
e.g.) Call “John Smith” on Other
●Dial Number
Displays a screen where you can say a
phone number to dial.
●Dial You can directly say the number to call.
e.g.) Dial 111 555 1234
●RedialDirectly calls at the number that you last
dialed.
●Call HistoryDisplays your Call History, where you can
say the list number to make a call.
)@"&
)&7
@(<64"@&6>"7/@1"35JOEE


 )@"&
)&7
@(<64"@&6>"7/@1"35JOEE





Voice Commands I 7-9
07
Navigation Commands
* Check the following before you use navigation commands:
1. Search for and find addresses located in the state or province your car is currently in.
If you want to search in another state, say the name of state/ province and then look it up.
Find Address is classified by states/provinces to provide you with faster service.
2. Some commands such as “Cancel Route” are available only when the destination is fixed.
Command Operation
●Find Address
in
•
Finds the address in and sets it as
the destination.
e.g.) Find Address in California
•
To find an address, you should say “House
Number →
Street →
City”

e.g.) 300 (Three Zero Zero) Main Street, Almond
●Find Address Finds the address and sets it as the destination.
●Find POIFind the points of interest. After this command,
you can find the name of a location step-by-
step.
●Find
Immediately finds . For detail of
, see “Find ” list.
e.g.) Find “Banks”
Command
Operation
●MapMoves to the current position on the naviga-
tion map
●Previous
PointsDisplays a list combining Previous Destinations,
Previous Searches, and Previous Starting Points
all together.
You can then set a destination by saying the list
number.
●Previous
Destinations
Displays a list of recent destinations that you
can return to by saying the number in the list.
●Previous
SearchesDisplays a list of recent searches, where you
can set a destination by saying the number in
the list.
●Previous
Starting Points
Displays a list of recent starting points that you
can return to by saying the number in the list.
●Traffic
Information
Moves to the Traffic Information menu screen.
●Go HomeSet the destination to your home.
Your home must first be set in the Navigation
system.
●Go to OfficeSet the destination to your office/work.
Your office/work must first be set in the
Navigation system.
)@"&
)&7
@(<64"@&6>"7/@1"35JOEE


 )@"&
)&7
@(<64"@&6>"7/@1"35JOEE





7-10 I Voice Recognition
CommandOperation
●Turn Guidance
OnTurns on the voice guidance system.
●Turn Guidance
OffTurns off the voice guidance system.
●Zoom All the
Way OutZooms out from the navigation map to the
fullest.
●Zoom All the
Way In
Zooms in on the navigation map to the fullest.
●Cancel RouteCancels the route to the fixed destination and
exits guidance.
●Destination
InformationTells you the remaining distance and time to
your destination.
●Route OptionsRestarts the route to your destination.
You can then select either “Faster Time” or
“Shorter Distance”.
●Find Faster
Time RouteStarts a new route to your destination that
will take the least amount of time.
●
Find Shorter
Distance
RouteStarts a new route to your destination that
will use the shortest distance.
●Emergency
ServicesDisplays a list of nearest Police Station,
Hospital, Dealership, or Road Assistance.
You can then set a destination by saying the
list number.
●Police Station
Displays a list of the nearest police stations.
You can then set a destination by saying the
list number.
Command
Operation
●HospitalDisplays a list of the nearest hospitals.
You can then set a destination by saying the
list number.
●DealershipDisplays a list of the nearest car dealerships.
You can then set a destination by saying the
list number.
●Road
AssistanceDisplays a list of the nearest road assistance
locations.
You can then set a destination by saying the
list number.
●Show Route
Displays a map overview of the entire route
to your destination.
)@"&
)&7
@(<64"@&6>"7/@1"35JOEE


 )@"&
)&7
@(<64"@&6>"7/@1"35JOEE