fog light Hyundai Santa Fe 2009 Owner's Manual - RHD (UK, Australia)

1FEATURES OF YOUR HYUNDAI
62
B340E01A-DAT Passing Switch
B340G01LZ-GAT Auto Light (If installed)
OCM052061R
To operate the automatic light feature, turn the barrel on the end of the multi- function switch. If you set the multi-function switch to "AUTO", the tail lights and headlights will be turned au- tomatically on or off according to exter-nal illumination. NOTE: Switch on car light manually in foggy, cloudy and rainy conditions.
NOTE:
o Never place anything over sensor located on the instrument panel, this will ensure better auto light system control.
o Don't clean the sensor using a window cleaner.
o If your vehicle has window tint or
other types of coating on the front windshield, the AUTO light sys- tem may not work properly. OCM052062R
Auto light sensor
To flash the headlights, pull the switch lever toward you, then release it. Theheadlights can be flashed even though the headlight switch is in the "OFF" position.
OCM029064R
CM-aust-1a.p65 5/21/2008, 2:07 PM
62

1FEATURES OF YOUR HYUNDAI
66FOG LIGHT SWITCH
B360A01FC-AAT Front Fog Light Switch (If installed) To turn on the front fog lights, push the switch in the "ON" position. They willlight when the headlight switch is in the first or second position.
OCM052074R
B390A02CM-AAT Rear Window Wiper and Washer (If installed) : Wash with brief wipes
ON : Normal wiper operation OFF : Wiper is not in operation
: Spraying washer fluid and wiping
NOTE: Do not operate the washer continu- ously for more than 15 seconds or when the fluid reservoir is empty; this could damage the system. Donot operate the wiper when the win- dow is dry; this can result in scratch- ing as well as premature wiper bladewear. For the reason stated above,do not operate the washer when the washerfluid reservoir is empty.
OTQ048058R
Type A
Type B
OTQ048905R
Turn the switch to desired position to operate the rear wiper and washer.
CM-aust-1a.p65 5/21/2008, 2:07 PM
66

1
FEATURES OF YOUR HYUNDAI
67
B360A01CM-GAT Rear Fog Light Switch To turn on the rear fog lights, push the switch. They will come on when theheadlight switch is in the second posi- tion or the front fog light switch is "ON" position and the key is in the "ON"position.
OCM051019R
REAR WINDOW DEMISTER SWITCH
B380A01CM-DAT The rear window demister and heated outside rearview mirrors are turned onby pushing in the switch. To turn the demister off, push the switch a second time. The rear window demister auto-matically turns itself off after about 20 minutes. To restart the demister cycle, push in the switch again after it hasturned itself off.
OCM052080R
HAZARD WARNING SYSTEM
B370A01A-AAT
The hazard warning system should be used whenever you find it necessary tostop the car in a hazardous location. When you must make such an emer- gency stop, always pull off the road asfar as possible. The hazard warning lights are turned on by pushing in the hazard switch. This causes all turnsignal lights to blink. The hazard warn- ing lights will operate even though the key is not in the ignition. To turn thehazard warning lights off, push the switch a second time.
OCM052075R
CM-aust-1a.p65 5/21/2008, 2:08 PM
67

1
FEATURES OF YOUR HYUNDAI
101
B670D01L-DAT Air Flow Control This is used to direct the flow of air. Air can be directed to the floor, dashboardoutlets, or windshield. Five symbols are used to represent Face, Bi-Level, Floor, Floor-Demist and Demist air po-sition.
With the "Fresh" mode selected, airenters the vehicle from the outside andis heated or cooled according to the function selected. With the "Recirculation" mode selected, air from within the passenger compart- ment will be drawn through the heatingsystem and heated or cooled according to the function selected. NOTE: It should be noted that prolonged operation of the heating system in "Recirculation" mode (

) will give
rise to fogging of the windshield and side windows and the air within thepassenger compartment will become stale. In addition prolonged use of the air conditioning with the "Recir- culation" mode (
) selected may
result in the air within the passenger compartment becoming excessively dry.
OCM052156R
B670C03E-AAT Air Intake Control SwitchOCM052154
This is used to select fresh outside air or recirculate inside air. To change the air intake control mode,(Fresh mode, Recirculation mode) push the control button. FRESH MODE (
) : The indicator
light on the button is illuminated when the air intake control is in fresh mode. RECIRCULATION MODE (
) : The
indicator light on the button is illumi- nated when the air intake control is in recirculation mode.
CM-aust-1a.p65 5/21/2008, 2:10 PM
101

1FEATURES OF YOUR HYUNDAI
106AIR CONDITIONING SYSTEM
B740A01S-AAT (If installed) Air Conditioning Switch The air conditioning is turned on or off by pushing the A/C button on the heat-ing/air conditioning control panel. B740B02A-AAT Air Conditioning Operation Cooling
B730A01L-AAT Operation Tips
o To keep dust or unpleasant fumes
from entering the car through the ventilation system, temporarily set the air intake control at "Recircula- tion (
)" . Be sure to return the
control to "Fresh (
)" when the
irritation has passed to keep fresh air in the vehicle. This will help keep thedriver alert and comfortable.
o Air for the heating/cooling system is
drawn in through the grilles just aheadof the windshield. Care should be taken that these are not blocked by leaves, snow, ice or other obstruc-tions.
o To prevent interior fog on the wind-
shield, set the air intake control tothe fresh air (
) position, fan speed
to the desired position, turn on the air conditioning system, and adjust tem-perature control to desired tempera- ture.
OCM051039ROCM052157
To use the air conditioning to cool the interior:
o Turn on the fan control switch.
o Turn on the air conditioning switch bypushing in on the switch. The air conditioning indicator light should come on at the same time.
o Set the air intake control to "Fresh" mode (
).
o Set the temperature control to "Cool". ("Cool" provides maximum cooling. The temperature may be moderated by moving the control toward"Warm".)
CM-aust-1a.p65 5/21/2008, 2:11 PM
106

1
FEATURES OF YOUR HYUNDAI
111
OCM052109L
RECIRCULATION MODE (
) : The
indicator light on the button is illumi- nated when the air intake control is recirculation mode. With the "Fresh" mode selected, air enters the vehicle from the outside and is heated or cooled according to thefunction selected. With the "Recirculation" mode selected, and air from within the passenger com- partment will be drawn through the heat- ing system and heated or cooled ac-cording to the function selected. NOTE: It should be noted that prolonged operation of the heating system in "recirculation" mode will give rise tofogging of the windshield and side windows and the air within the pas- senger compartment will becomestale. In addition, prolonged use of the air conditioning with the "Recir- culation" mode selected may resultin the air within the passenger com- partment becoming excessively dry.
B980C02JM-GAT Air Intake Control Switch (With A.Q.S) (If installed) This is used to select fresh outside air or recirculate inside air automatically.
:OFF
: ON Fresh Mode :
Air enters the vehicle from the outside and is heated or cooled according to the function selected.
Recirculation Mode :
Air from within the passenger compart- ment will be drawn through the heating system and heated or cooled according to the function selected.
OCM052109
CM-aust-1a.p65 5/21/2008, 2:11 PM
111

6DO-IT-YOURSELF MAINTENANCE
30
OCM055020
(1)
(2) (3) (4)
(5)
5. Disconnect the power cord fromthe bulb base in the back of the headlight.
6. Turn the plastic cover counterclock- wise and remove it.
OCM055010L
G270A01CM-DAT
Headlight, Front Turn Signal Light and Front Position Light
OCM055008L
OCM055021L
OCM055009L
(1) Turn signal light (2) Front position light (3) Headlight (Low Beam) (4) Headlight (High Beam) (5) Front fog light
1. Allow the bulb to cool. Wear eye protection.
2. Open the engine bonnet.
3. Always grasp the bulb by its plastic base, avoid touching the glass. 4. Using a proper tool, remove the
headlight assembly mounting bolts and nut.
CM-aust-6.p65 5/19/2008, 6:39 PM
30

6DO-IT-YOURSELF MAINTENANCE
32
G270K01CM-DAT Front Fog Light (If Installed) NOTE: It is recommended that the front fog light bulb be replaced by an authorised Hyundai dealer.
G270B01CM-GAT
Rear Combination Light
OCM055022
(3)
(1) (2)
1. Open the tail gate.
2. Remove the cover with a flat-headscrewdriver.
3. Remove the mounting screws of the rear combination light as shown with a wrench handle.
OCM052016
OCM055028
CM-aust-6.p65 5/19/2008, 6:39 PM
32

6
DO-IT-YOURSELF MAINTENANCE
33
2. Disconnect the power code by turn-
ing the bulb cover counterclockwise and take the bulb out from the bulbcover by turning it clockwise.
3. Replace with a new bulb. G270F02O
Bulb Cover
Power Code
1. Remove the mounting screws of the rear fog light cover with a phillips screwdriver.
G270F02A-GAT
Rear Fog Light
OCM055015L
4. To replace the rear combination light, take it out from the bulb holder byturning it counterclockwise.(1) Stop/Tail light (2) Back-up light (3) Turn signal light
5. Install the new bulb.
OCM055030
(1)
(2)
OCM055026(1)
(3)
CM-aust-6.p65
5/19/2008, 6:39 PM
33

6
DO-IT-YOURSELF MAINTENANCE
37BULB WATTAGE
G280A02CM-DAT
OCM058025A
Wattage5
10 5
21
21/5
16 215
Socket Type
PX26D
BAU15s
W2.1 x 9.5D
S8.5/8.5S8.5/8.5PG13
BAX9S
W2.1 x 9.5D LED Socket Type
W2.1 x 4.6D
S8.5/8.5
W2.1 x 9.5D
BAU15s
BAY15D
W2.1 x 9.5D BA15s
W2.1 x 9.5D
10 11 12 13 14 15
Part Name
Headlight Turn Signal Light Map Light Glove Box Illuminated Light Interior Light Front Fog Light (If Installed)
Front Position LightSide Repeater Light Side Repeater Light (if installed) Wattage
5521 10
5
10 27 65 5 No.No.
1 2 3 4 5 6 7 8 9Part Name
Front Door Edge Warning Light (if installed) Luggage Compartment Light High Mounted Rear Stop Light Rear Combination Light Turn Signal Light Stop/Tail Light Back-up Light Rear Fog Light License Plate Light
CM-aust-6.p65 5/19/2008, 6:40 PM
37