brake INFINITI FX35 2005 Owners Manual

TROUBLE DIAGNOSIS AT-81
D E
F
G H
I
J
K L
M A
B
AT
Revision: 2005 July 2005 FX
43
Slips/Will
Not
Engage No creep at all.
Refer to AT-200,
"Vehicle Does Not
Creep Backward in
“R” Position" , AT-203,
"Vehicle Does Not
Creep Forward in “D”
Position"
ON vehicle 1. A/T fluid level and state
AT- 5 2
2. Line pressure testAT- 5 4
3. Accelerator pedal position sensorAT-133
4. ATF pressure switch 5 and direct clutch solenoid valve AT-179,
AT-158
5. PNP switch AT- 11 4
6. CAN communication lineAT-106
7. Control linkage adjustmentAT-235
8. Control valve with TCMAT-243
OFF vehicle 9. Torque converter
AT-290
10. Oil pump assemblyAT-308
11. 1st one-way clutchAT-318
12. Gear systemAT-278
13. Reverse brakeAT-290
14. Direct clutchAT-326
15. Forward one-way clutch (Parts behind drum support is
impossible to perform inspection by disassembly. Refer to
AT- 1 8 , "
Cross-Sectional View (2WD Models)" or AT- 1 9 ,
"Cross-Sectional View (AWD Models)" ) AT-290
16. Forward brake (Parts behind drum support is impossible
to perform inspection by disassembly. Refer to AT-18,
"Cross-Sectional View (2WD Models)" or AT-19, "Cross-
Sectional View (AWD Models)" ) AT-290
44
Vehicle cannot run in
all positions. ON vehicle 1. A/T fluid level and state
AT- 5 2
2. Line pressure testAT- 5 4
3. PNP switchAT- 11 4
4. Control linkage adjustmentAT-235
5. Control valve with TCMAT-243
OFF vehicle 6. Oil pump assembly
AT-3087. Gear systemAT-278
8. Output shaftAT-290
No. Items Symptom Condition Diagnostic Item Reference
page

AT-82
TROUBLE DIAGNOSIS
Revision: 2005 July 2005 FX
45
Slips/Will
Not
Engage With selector lever in
“D” position, driving is
not possible. ON vehicle
1. A/T fluid level and state
AT- 5 2
2. Line pressure testAT- 5 4
3. PNP switchAT- 11 4
4. Control linkage adjustmentAT- 2 3 5
5. Control valve with TCMAT- 2 4 3
OFF vehicle 6. Torque converter
AT- 2 9 0
7. Oil pump assemblyAT- 3 0 8
8. 1st one-way clutchAT- 3 1 8
9. Gear systemAT- 2 7 8
10. Reverse brakeAT- 2 9 0
11. Forward one-way clutch (Parts behind drum support is
impossible to perform inspection by disassembly. Refer to
AT-18, "
Cross-Sectional View (2WD Models)" or AT-19,
"Cross-Sectional View (AWD Models)" ) AT- 2 9 0
12. Forward brake (Parts behind drum support is impossible
to perform inspection by disassembly. Refer to AT-18,
"Cross-Sectional View (2WD Models)" or AT- 1 9 , "Cross-
Sectional View (AWD Models)" ) AT- 2 9 0
46
With selector lever in
“R” position, driving is
not possible. ON vehicle
1. A/T fluid level and state
AT- 5 2
2. Line pressure testAT- 5 4
3. PNP switchAT- 11 4
4. Control linkage adjustmentAT- 2 3 5
5. Control valve with TCMAT- 2 4 3
OFF vehicle 6. Gear system
AT- 2 7 87. Output shaftAT- 2 9 0
8. Reverse brakeAT- 2 9 0
47 Does Not
Change Does not change M5
→ M4.
Refer to AT-223, "A/T
Does Not Shift: 5th
Gear → 4th Gear" . ON vehicle 1. PNP switch
AT- 11 4
2. A/T fluid level and state AT- 5 2
3. Control linkage adjustmentAT- 2 3 5
4. Manual mode switchAT- 1 7 0
5. ATF pressure switch 1AT- 1 7 5
6. CAN communication lineAT- 1 0 6
7. Control valve with TCMAT- 2 4 3
OFF vehicle 8. Front brake (brake band) AT- 2 9 0
No. Items Symptom Condition Diagnostic Item Reference
page

TROUBLE DIAGNOSIS AT-83
D E
F
G H
I
J
K L
M A
B
AT
Revision: 2005 July 2005 FX48
Does Not
Change Does not change M4
→ M3.
Refer to AT-225, "A/T
Does Not Shift: 4th
Gear → 3rd Gear" . ON vehicle 1. PNP switch
AT- 11 4
2. A/T fluid level and state AT- 5 2
3. Control linkage adjustmentAT-235
4. Manual mode switchAT-170
5. ATF pressure switch 1 and ATF pressure switch 3 AT-175,
AT-177
6. CAN communication line AT-106
7. Control valve with TCMAT-243
OFF vehicle 8. Front brake (brake band)
AT-2909. Input clutchAT-313
49 Does not change M3
→ M2.
Refer to AT-227, "A/T
Does Not Shift: 3rd
Gear → 2nd Gear" . ON vehicle 1. PNP switch
AT- 11 4
2. A/T fluid level and state AT- 5 2
3. Control linkage adjustmentAT-235
4. Manual mode switchAT-170
5. ATF pressure switch 6AT-181
6. CAN communication lineAT-106
7. Control valve with TCMAT-243
OFF vehicle 8. Front brake (brake band)
AT-2909. Input clutchAT-313
10. High and low reverse clutchAT-323
50 Does not change M2
→ M1.
Refer to AT-229, "A/T
Does Not Shift: 2nd
Gear → 1st Gear" . ON vehicle 1. PNP switch
AT- 11 4
2. A/T fluid level and state AT- 5 2
3. Control linkage adjustmentAT-235
4. Manual mode switchAT-170
5. ATF pressure switch 5AT-179
6. CAN communication lineAT-106
7. Control valve with TCMAT-243
OFF vehicle 8. Input clutch
AT-3139. High and low reverse clutchAT-323
10. Direct clutchAT-326
51 Cannot be changed to
manual mode.
Refer to AT-223,
"Cannot Be Changed
to Manual Mode" . ON vehicle 1. Manual mode switch
AT-170
2. Turbine revolution sensorAT-141
3. CAN communication lineAT-106
52 Others Shift point is high in
“D” position. ON vehicle 1. Vehicle speed sensor A/T and vehicle speed sensor MTR
AT- 11 8
,
AT-143
2. Accelerator pedal position sensor AT-133
3. CAN communication lineAT-106
4. ATF temperature sensorAT-136
5. Control valve with TCMAT-243
No. Items Symptom Condition Diagnostic Item Reference
page

AT-84
TROUBLE DIAGNOSIS
Revision: 2005 July 2005 FX
53
Others Shift point is low in “D”
position. ON vehicle 1. Vehicle speed sensor A/T and vehicle speed sensor MTR
AT- 11 8
,
AT- 1 4 3
2. Accelerator pedal position sensor AT- 1 3 3
3. CAN communication lineAT- 1 0 6
4. Control valve with TCMAT- 2 4 3
54 Judder occurs during
lock-up. ON vehicle 1. A/T fluid level and state
AT- 5 2
2. Engine speed signalAT- 1 2 3
3. Turbine revolution sensorAT- 1 4 1
4. Vehicle speed sensor A/T and vehicle speed sensor MTR AT- 11 8,
AT- 1 4 3
5. Accelerator pedal position sensor AT- 1 3 3
6. CAN communication lineAT- 1 0 6
7. Torque converter clutch solenoid valveAT- 1 2 5
8. Control valve with TCMAT- 2 4 3
OFF vehicle 9. Torque converter AT- 2 9 0
55 Strange noise in “R”
position. ON vehicle
1. A/T fluid level and state
AT- 5 2
2. Engine speed signalAT- 1 2 3
3. CAN communication lineAT- 1 0 6
4. Control valve with TCMAT- 2 4 3
OFF vehicle 5. Torque converter
AT- 2 9 0
6. Oil pump assemblyAT- 3 0 8
7. Gear systemAT- 2 7 8
8. High and low reverse clutchAT- 3 2 3
9. Reverse brakeAT- 2 9 0
56 Strange noise in “N”
position. ON vehicle
1. A/T fluid level and state
AT- 5 2
2. Engine speed signalAT- 1 2 3
3. CAN communication lineAT- 1 0 6
4. Control valve with TCMAT- 2 4 3
OFF vehicle 5. Torque converter
AT- 2 9 06. Oil pump assemblyAT- 3 0 8
7. Gear systemAT- 2 7 8
No. Items Symptom Condition Diagnostic Item Reference
page

TROUBLE DIAGNOSIS AT-85
D E
F
G H
I
J
K L
M A
B
AT
Revision: 2005 July 2005 FX57
Others Strange noise in “D”
position. ON vehicle
1. A/T fluid level and state
AT- 5 2
2. Engine speed signalAT-123
3. CAN communication lineAT-106
4. Control valve with TCMAT-243
OFF vehicle 5. Torque converter
AT-290
6. Oil pump assemblyAT-308
7. Gear systemAT-278
8. Forward brake (Parts behind drum support is impossible
to perform inspection by disassembly. Refer to AT-18,
"Cross-Sectional View (2WD Models)" or AT-19, "Cross-
Sectional View (AWD Models)" ) AT-290
58 Vehicle does not
decelerate by engine
brake.
Refer to AT-231,
"Vehicle Does Not
Decelerate by Engine
Brake" . ON vehicle
1. PNP switch
AT- 11 4
2. A/T fluid level and state AT- 5 2
3. Control linkage adjustmentAT-235
4. Manual mode switchAT-170
5. ATF pressure switch 5AT-179
6. CAN communication lineAT-106
7. Control valve with TCMAT-243
OFF vehicle 8. Input clutch
AT-3139. High and low reverse clutchAT-323
10. Direct clutchAT-326
59 Engine brake does
not work M5 → M4. ON vehicle 1. PNP switch
AT- 11 4
2. A/T fluid level and state AT- 5 2
3. Control linkage adjustmentAT-235
4. Manual mode switchAT-170
5. ATF pressure switch 1AT-175
6. CAN communication lineAT-106
7. Control valve with TCMAT-243
OFF vehicle 8. Front brake (brake band) AT-290
60 Engine brake does
not work M4 → M3. ON vehicle 1. PNP switch
AT- 11 4
2. A/T fluid level and state AT- 5 2
3. Control linkage adjustmentAT-235
4. Manual mode switchAT-170
5. ATF pressure switch 1 and ATF pressure switch 3 AT-175,
AT-177
6. CAN communication line AT-106
7. Control valve with TCMAT-243
OFF vehicle 8. Front brake (brake band)
AT-2909. Input clutchAT-313
No. Items Symptom Condition Diagnostic Item Reference
page

AT-86
TROUBLE DIAGNOSIS
Revision: 2005 July 2005 FX
61
Others Engine brake does
not work M3 → M2. ON vehicle 1. PNP switch
AT- 11 4
2. A/T fluid level and state AT- 5 2
3. Control linkage adjustmentAT- 2 3 5
4. Manual mode switchAT- 1 7 0
5. ATF pressure switch 6AT- 1 8 1
6. CAN communication lineAT- 1 0 6
7. Control valve with TCMAT- 2 4 3
OFF vehicle 8. Front brake (brake band)
AT- 2 9 09. Input clutchAT- 3 1 3
10. High and low reverse clutchAT- 3 2 3
62 Engine brake does
not work M2 → M1. ON vehicle 1. PNP switch
AT- 11 4
2. A/T fluid level and state AT- 5 2
3. Control linkage adjustmentAT- 2 3 5
4. Manual mode switchAT- 1 7 0
5. ATF pressure switch 5AT- 1 7 9
6. CAN communication lineAT- 1 0 6
7. Control valve with TCMAT- 2 4 3
OFF vehicle 8. Input clutch
AT- 3 1 39. High and low reverse clutchAT- 3 2 3
10. Direct clutchAT- 3 2 6
63 Maximum speed low. ON vehicle
1. A/T fluid level and state
AT- 5 2
2. Line pressure testAT- 5 4
3. Accelerator pedal position sensorAT- 1 3 3
4. CAN communication lineAT- 1 0 6
5. Direct clutch solenoid valveAT- 1 5 8
6. Control valve with TCMAT- 2 4 3
OFF vehicle 7. Torque converter
AT- 2 9 0
8. Oil pump assemblyAT- 3 0 8
9. Input clutchAT- 3 1 3
10. Gear systemAT- 2 7 8
11. High and low reverse clutchAT- 3 2 3
12. Direct clutchAT- 3 2 6
13. Forward one-way clutch (Parts behind drum support is
impossible to perform inspection by disassembly. Refer to
AT-18, "
Cross-Sectional View (2WD Models)" or AT-19,
"Cross-Sectional View (AWD Models)" ) AT- 2 9 0
14. Forward brake (Parts behind drum support is impossible
to perform inspection by disassembly. Refer to AT-18,
"Cross-Sectional View (2WD Models)" or AT- 1 9 , "Cross-
Sectional View (AWD Models)" ) AT- 2 9 0
No. Items Symptom Condition Diagnostic Item
Reference
page

TROUBLE DIAGNOSIS AT-87
D E
F
G H
I
J
K L
M A
B
AT
Revision: 2005 July 2005 FX
64
Others Extremely large
creep. ON vehicle 1. Engine idle speed EC-83
(for
VQ35DE)
or EC-774

(for
VK45DE)
2. CAN communication line AT-106
3. ATF pressure switch 5AT-179
OFF vehicle 4. Torque converter AT-290
65 With selector lever in
“P” position, vehicle
does not enter parking
condition or, with
selector lever in
another position, park-
ing condition is not
cancelled.
Refer to AT-195, "
In
“P” Position, Vehicle
Moves When Pushed"
. ON vehicle
1. PNP switch
AT- 11 4
2. Control linkage adjustmentAT-235
OFF vehicle 3. Parking pawl components AT-
255(2WD
models) or AT-290

(AWD
models)
66 Vehicle runs with
transmission in “P”
position. ON vehicle
1. PNP switch
AT- 11 4
2. A/T fluid level and state AT- 5 2
3. Control linkage adjustmentAT-235
4. Control valve with TCMAT-243
OFF vehicle 5. Parking pawl components AT-
255(2WD
models) or
AT-290

(AWD
models)
6. Gear system AT-278
67 Vehicle runs with
transmission in “N”
position.
Refer to AT-196, "In
“N” Position, Vehicle
Moves" . ON vehicle
1. PNP switch
AT- 11 4
2. A/T fluid level and state AT- 5 2
3. Control linkage adjustmentAT-235
4. Control valve with TCMAT-243
OFF vehicle 5. Input clutch
AT-313
6. Gear systemAT-278
7. Direct clutchAT-326
8. Reverse brakeAT-290
9. Forward one-way clutch (Parts behind drum support is
impossible to perform inspection by disassembly. Refer to
AT- 1 8 , "
Cross-Sectional View (2WD Models)" or AT- 1 9 ,
"Cross-Sectional View (AWD Models)" ) AT-290
10. Low coast brake (Parts behind drum support is impossi-
ble to perform inspection by disassembly. Refer to AT-18,
"Cross-Sectional View (2WD Models)" or AT-19, "Cross-
Sectional View (AWD Models)" ) AT-290
No. Items Symptom Condition Diagnostic Item
Reference
page

AT-88
TROUBLE DIAGNOSIS
Revision: 2005 July 2005 FX
68
Others Engine does not start
in “N” or “P” position.
Refer to AT-194, "Engine Cannot Be
Started in “P” or “N”
Position" . ON vehicle
1. Ignition switch and starter
PG-3
,
SC-
10
2. Control linkage adjustment AT- 2 3 5
3. PNP switch AT- 11 4
69 Engine starts in posi-
tions other than “N” or
“P”. ON vehicle 1. Ignition switch and starter
PG-3
,
SC-
10
2. Control linkage adjustment AT- 2 3 5
3. PNP switch AT- 11 4
70 Engine stall. ON vehicle 1. A/T fluid level and state
AT- 5 2
2. Engine speed signalAT- 1 2 3
3. Turbine revolution sensorAT- 1 4 1
4. Torque converter clutch solenoid valveAT- 1 2 5
5. CAN communication lineAT- 1 0 6
6. Control valve with TCMAT- 2 4 3
OFF vehicle 7. Torque converter AT- 2 9 0
71 Engine stalls when
selector lever shifted
“N” → “D”, “R”. ON vehicle 1. A/T fluid level and state
AT- 5 2
2. Engine speed signalAT- 1 2 3
3. Turbine revolution sensorAT- 1 4 1
4. Torque converter clutch solenoid valveAT- 1 2 5
5. CAN communication lineAT- 1 0 6
6. Control valve with TCMAT- 2 4 3
OFF vehicle 7. Torque converter AT- 2 9 0
72 Engine speed does
not return to idle.
Refer to AT-221,
"Engine Speed Does
Not Return to Idle" . ON vehicle 1. A/T fluid level and state
AT- 5 2
2. ATF pressure switch 5 and direct clutch solenoid valve AT- 1 7 9,
AT- 1 5 8

3. ATF pressure switch 1 and front brake solenoid valve AT- 1 7 5
,
AT- 1 5 4
4. Accelerator pedal position sensor AT- 1 3 3
5. Vehicle speed sensor A/T and vehicle speed sensor MTR AT- 11 8,
AT- 1 4 3
6. CAN communication line AT- 1 0 6
7. Control valve with TCMAT- 2 4 3
OFF vehicle 8. Front brake (brake band)
AT- 2 9 09. Direct clutchAT- 3 2 6
No. Items Symptom Condition Diagnostic Item Reference
page

AT-90
TROUBLE DIAGNOSIS
Revision: 2005 July 2005 FX
CONSULT-II Function (A/T)ACS002M9
CONSUT-II can display each diagnostic item using the diagnostic test models shown following.
FUNCTION
CONSULT-II REFERENCE VALUE
NOTICE:
1. The CONSULT-II electrically displays shift timing and lock-up timing (that is, operation timing of each sole-
noid).
Check for time difference between actual shift timing and the CONSULT-II display. If the difference is
noticeable, mechanical parts (except solenoids, sensors, etc.) may be malfunctioning. Check mechanical
parts using applicable diagnostic procedures.
2. Shift schedule (which implies gear position) displayed on CONSULT-II and that indicated in Service Man- ual may differ slightly. This occurs because of the following reasons:
–Actual shift schedule has more or less tolerance or allowance,
–Shift schedule indicated in Service Manual refers to the point where shifts start, and
–Gear position displayed on CONSULT-II indicates the point where shifts are completed.
3. Display of solenoid valves on CONSULT-II changes at the start of shifting, while gear position is displayed upon completion of shifting (which is computed by TCM).
Diagnostic test mode Function Reference page
Self-diagnostic results Self-diagnostic results can be read and erased quickly. AT- 9 3
Data monitor Input/Output data in the ECU can be read.AT- 9 6
CAN diagnostic support
monitor The results of transmit/receive diagnosis of CAN communication can be read.
AT- 1 0 0
Function test Performed by CONSULT-II instead of a technician to determine whether each system
is “OK” or “NG”. —
DTC work support Select the operating condition to confirm Diagnosis Trouble Codes. AT- 1 0 0
ECU part number ECU part number can be read. —
Item name Condition Display value
(Approx.)
VHCL/S SE·A/T During driving Approximately
matches the speed-
ometer reading.
VHCL/S SE·MTR
ACCELE POSI Released accelerator pedal. 0.0/8
Fully depressed accelerator pedal. 8/8
CLSD THL POS Released accelerator pedal. ON
Fully depressed accelerator pedal. OFF
W/O THL POS Fully depressed accelerator pedal. ON
Released accelerator pedal. OFF
BRAKE SW Depressed brake pedal. ON
Released brake pedal. OFF
ENGINE SPEED Engine running Closely matches the
tachometer reading.
TURBINE REV During driving (lock-up ON) Approximately
matches the engine
speed.
ATF TEMP SE 1 0 °C (32 ° F) - 20 °C (68 °F) - 80 °C (176 °F) 3.3 - 2.7 - 0.9 V
ATF TEMP SE 2 3.3 - 2.5 - 0.7 V
TCC SOLENOID When performing slip lock-up 0.2 - 0.4 A
When performing lock-up 0.4 - 0.6 A
LINE PRES SOL During driving 0.2 - 0.6 A

TROUBLE DIAGNOSIS AT-91
D E
F
G H
I
J
K L
M A
B
AT
Revision: 2005 July 2005 FX
FR/B SOLENOID Front brake engaged. Refer to
AT- 2 1 . 0.6 - 0.8 A
Front brake disengaged. Refer to AT- 2 1
. 0 - 0.05 A
I/C SOLENOID Input clutch disengaged. Refer to
AT- 2 1
. 0.6 - 0.8 A
Input clutch engaged. Refer to AT- 2 1
. 0 - 0.05 A
D/C SOLENOID Direct clutch disengaged. Refer to
AT- 2 1
. 0.6 - 0.8 A
Direct clutch engaged. Refer to AT- 2 1
. 0 - 0.05 A
HLR/C SOL High and low reverse clutch disengaged. Refer to
AT- 2 1
. 0.6 - 0.8 A
High and low reverse clutch engaged. Refer to AT- 2 1
. 0 - 0.05 A
STARTER RELAY Selector lever in “N”, “P” position. ON
Selector lever in other positions. OFF
SLCT LVR POSI Selector lever in “N”,“P” position. N/P
Selector lever in “R” position. R
Selector lever in “D” position. D
ON OFF SOL Low coast brake engaged. Refer to
AT- 2 1
.ON
Low coast brake disengaged. Refer to AT- 2 1
.OFF
ATF PRES SW 1 Front brake engaged. Refer to
AT- 2 1
.ON
Front brake disengaged. Refer to AT- 2 1
.OFF
ATF PRES SW 2 Low coast brake engaged. Refer to
AT- 2 1
.ON
Low coast brake disengaged. Refer to AT- 2 1
.OFF
ATF PRES SW 3 Input clutch engaged. Refer to
AT- 2 1
.ON
Input clutch disengaged. Refer to AT- 2 1
.OFF
ATF PRES SW 5 Direct clutch engaged. Refer to
AT- 2 1
.ON
Direct clutch disengaged. Refer to AT- 2 1
.OFF
ATF PRES SW 6 High and low reverse clutch engaged. Refer to
AT- 2 1
.ON
High and low reverse clutch disengaged Refer to AT- 2 1
.OFF
MANU MODE SW Manual shift gate position (neutral) ON
Other than the above OFF
NON M-MODE SW Manual shift gate position OFF
Other than the above ON
UP SW LEVER Selector lever: + side ON
Other than the above OFF
DOWN SW LEVER Selector lever: - side ON
Other than the above OFF
GEAR During driving 1, 2, 3, 4, 5 Item name Condition
Display value
(Approx.)