driver seat adjustment INFINITI Q50 HYBRID 2014 Quick Reference Guide

9
Trunk Lid Release
Use one of the following methods to open the trunk:
Push the trunk open request switch
01 for more than
1 second while carrying the INFINITI Intelligent



Key with you.
Press the trunk buttonHOLD on the Intelligent Key for
more than 1 second.
From inside the vehicle, push down on the trunk lid



release switch 02 on the instrument panel.
To completely disable all power to the trunk lid, push

the trunk release power cancel switch
03 to the OFF

position. While in this position, the trunk lid cannot be
opened with the trunk open request switch
01 ,
trunk button
HOLD , or the trunk lid release switch
02
until pushed to the ON position.
For more information, refer to the “Pre-driving checks and adjustments
(section 3)” of your Owner’s Manual.
Seat Adjustments
POWER SEAT ADJUSTMENTS
To slide the seat forward or backward, push the control
switch
01 forward or backward. To recline the seatback, push the switch
02
forward or backward.
SEAT LIFTER
To adjust the angle of the front portion or height of the seat, push the\
front or rear end of the
switch
01 up or down.
POWER LUMBAR SUPPORT (if so equipped)
To adjust the seat lumbar support, push the front or back end of the swi\
tch 03.
MANUAL LUMBAR SUPPORT (if so equipped)


To adjust the seat lumbar support, move the lever up or down.
SIDE SUPPORT (driver’s seat only) (if so equipped)
The driver’s seat side support adjusts the support on your torso.
Push the switch 04 away from you to loosen the support, or pull the switch
04 toward you for
more support.
MANUAL THIGH EXTENSION (if so equipped)
To slide the thigh extension forward or backward, pull up on the lever 05 under the front of the
seat and slide forward or backward, Release the lever to lock the seat i\
n position.
For more information, refer to the “Safety – seats, seat belts and supplemental restraint system (se\
ction 1 )”
of your Owner’s Manual.
01
02
03
01
04
02
03
05

10
first drive features
Heated Seats (if so equipped)
There are 2 ways to operate the heated seats:



1. By pressing the heated seat switch 01.



•


Every press of the switch allows you to cycle
through the 5 different modes of

AUTO – Hi –
Mid – Lo – OFF.



2.


While on the

CLIMATE control screen on the
lower display, touch the left or right heated seat
icon
02.



•

The Left or Right Seat Setting screen is
displayed with a list of the 5 different modes of
AUTO – Hi – Mid – Lo – OFF to choose from.



•


The indicator light on the heated seat switch 01 will illuminate when the system is in
AUTO – Hi – Mid – Lo.



•

While in AUTO, the heated seats will turn on/off automatically, depending on
temperature conditions in the vehicle compartment.



•


To view which one of the 5 modes the system is in, press the
CLIMATE button
03.
This will bring up the CLIMATE control screen on the lower display. From here you will
see the heated seat icons
02 for the driver and passenger side, and below the icon is
the mode the system is in currently.
For more information, refer to the “Heater and Air Conditioner (section 3)” of your InTouch Owner’s Manual.
0202
03
0101
Automatic Drive Positioner (if so equipped)
Two positions for the driver’s seat, steering column
and outside mirrors can be stored in the automatic
drive positioner memory.
Follow these procedures to set the memory positions:



•

Confirm the shift lever is in the
P (PARK) position.



•

Push the ignition switch to the
ON position.



•

Adjust the driver’s seat, steering column and

outside mirrors to the desired positions using the
adjusting switches for each feature.



•
Push the SET switch and within 5 seconds, push the memory switch (1 or 2) for at
least 1 second.



•

The indicator light on the memory switch you select will illuminate for \
approximately

5 seconds.



•

The driver’s seat, steering column and outside mirror positions are n\
ow set to

your preference.
When you turn off your vehicle the driver’s seat, steering column, an\
d outside mirror
positions are automatically remembered and recalled the next time you lo\
g into your vehicle.
For more information, refer to the “Pre-driving checks and adjustments (section 3 )” of your Owner’s Manual, and “Information
and Settings (section 8)” of your InTouch Owner’s Manual.