seat memory INFINITI Q50 HYBRID 2014 Quick Reference Guide

10
first drive features
Heated Seats (if so equipped)
There are 2 ways to operate the heated seats:



1. By pressing the heated seat switch 01.



•


Every press of the switch allows you to cycle
through the 5 different modes of

AUTO – Hi –
Mid – Lo – OFF.



2.


While on the

CLIMATE control screen on the
lower display, touch the left or right heated seat
icon
02.



•

The Left or Right Seat Setting screen is
displayed with a list of the 5 different modes of
AUTO – Hi – Mid – Lo – OFF to choose from.



•


The indicator light on the heated seat switch 01 will illuminate when the system is in
AUTO – Hi – Mid – Lo.



•

While in AUTO, the heated seats will turn on/off automatically, depending on
temperature conditions in the vehicle compartment.



•


To view which one of the 5 modes the system is in, press the
CLIMATE button
03.
This will bring up the CLIMATE control screen on the lower display. From here you will
see the heated seat icons
02 for the driver and passenger side, and below the icon is
the mode the system is in currently.
For more information, refer to the “Heater and Air Conditioner (section 3)” of your InTouch Owner’s Manual.
0202
03
0101
Automatic Drive Positioner (if so equipped)
Two positions for the driver’s seat, steering column
and outside mirrors can be stored in the automatic
drive positioner memory.
Follow these procedures to set the memory positions:



•

Confirm the shift lever is in the
P (PARK) position.



•

Push the ignition switch to the
ON position.



•

Adjust the driver’s seat, steering column and

outside mirrors to the desired positions using the
adjusting switches for each feature.



•
Push the SET switch and within 5 seconds, push the memory switch (1 or 2) for at
least 1 second.



•

The indicator light on the memory switch you select will illuminate for \
approximately

5 seconds.



•

The driver’s seat, steering column and outside mirror positions are n\
ow set to

your preference.
When you turn off your vehicle the driver’s seat, steering column, an\
d outside mirror
positions are automatically remembered and recalled the next time you lo\
g into your vehicle.
For more information, refer to the “Pre-driving checks and adjustments (section 3 )” of your Owner’s Manual, and “Information
and Settings (section 8)” of your InTouch Owner’s Manual.