7
TO PUT THE VEHICLE IN N (NEUTRAL):
The ignition switch must be in the ON position and the brake must be depressed.
From P (Park) to N (Neutral) and D (Drive) to N (Neutral):
Without pressing the shift lever button, push the shift lever forward from the idle position
and hold for .5 seconds.
From R (Reverse) to N (Neutral):
Without pressing the shift lever button, pull the shift lever backward from the idle
position and hold for .5 seconds.
After operating the shift lever, the shift lever returns to the idle position by releasing your
hand from the shift lever.
While in the N (Neutral) position, the P (Park) position is automatically engaged if the
ignition is turned off
or the driver’s seat belt is unfastened, the driver’s side door is
opened and the vehicle is stationary or driving at a very low speed.
TO PUT THE VEHICLE IN R (REVERSE):
Press the button
, then push the electronic shift lever forward past the point of resistance and release the shift lever.
TO PUT THE VEHICLE IN D (DRIVE):
Press the button
and pull the electronic shift lever back past the point of resistance and release the shift lever.
TO PUT THE VEHICLE IN P (PARK):
Make sure the vehicle is completely stopped and press the P (Park) button
. If you switch the ignition off with the transmission
in D (Drive) or R (Reverse), the transmission automatically shifts into the P (Park) position. The P (Park) position is automatically
engaged if the ignition is turned off
or the driver’s seat belt is unfastened, the driver’s side door is opened and the vehicle is
stationary or driving at a very low speed.
Please see your Owner’s Manual for important safety information, system limitations, and additional operating and feature information.
Electronic Shift Lever
