ignition INFINITI QX56 2006 Factory Service Manual

AV-2Revision: November 20092006 QX56
TEM ..................................................................
... 65
Wiring Diagram — H/PHONE — ......................... ... 67
Terminals and Reference Value for Bluetooth Con-
trol Unit ................................................................... 69
Bluetooth Control Unit Self-Diagnosis Function .. ... 71
BLUETOOTH CONTROL UNIT INITIALIZATION
CHECKS ........................................................... ... 71
STARTING THE DIAGNOSTIC MODE ............ ... 71
Power Supply and Ground Circuit Check for Blue-
tooth Control Unit ................................................. ... 72
Removal and Installation ..................................... ... 73
BLUETOOTH CONTROL UNIT ........................ ... 73
BLUETOOTH ON INDICATOR ......................... ... 73
MICROPHONE ................................................. ... 73
DVD ENTERTAINMENT SYSTEM ......................... ... 75
Component Parts and Harness Connector Location ... 75
Description ........................................................... ... 76
Schematic ............................................................ ... 77
Wiring Diagram — DVD — .................................. ... 78
Trouble Diagnosis ................................................ ... 81
Power Supply Circuit Inspection .......................... ... 82
Removal and Installation ..................................... ... 83
DVD PLAYER ...................................................... 83
VIDEO MONITOR ............................................ ... 83
NAVIGATION SYSTEM .......................................... ... 84
System Description .............................................. ... 84
TRAVEL DISTANCE ......................................... ... 84
TRAVEL DIRECTION ....................................... ... 84
MAP-MATCHING .............................................. ... 85
GPS (GLOBAL POSITIONING SYSTEM) ....... ... 85
COMPONENT DESCRIPTION ......................... ... 86
CAN Communication System Description ........... ... 86
Component Parts Location .................................. ... 87
Schematic ............................................................ ... 88
Wiring Diagram — NAVI — .................................. ... 89
Schematic ............................................................ ... 96
Wiring Diagram — COMM — .............................. ... 97
Terminals and Reference Value for NAVI Control
Unit ...................................................................... .100
Terminals and Reference Value for Display Control
unit ....................................................................... .102
Terminals and Reference Value for Display unit .. .106
Terminals and Reference Value for AV Switch .... .108
Terminals and Reference Value for BCM ............. .109
On Board Self-Diagnosis Function ...................... ..111
DESCRIPTION ................................................. ..111
DIAGNOSIS ITEM ............................................ ..111
Self-Diagnosis Mode (DCU) ................................ .112
OPERATION PROCEDURE ............................. .112
SELF–DIAGNOSIS RESULT ............................ .113
Self-Diagnosis Mode (NAVI) ................................ .114
OPERATION PROCEDURE ............................. .114
SELF–DIAGNOSIS RESULT ............................ .115
Confirmation/Adjustment Mode ........................... .117
OPERATION PROCEDURE ............................. .117
DISPLAY DIAGNOSIS ...................................... .118
VEHICLE SIGNALS .......................................... .118
NAVIGATION .................................................... .119
DISPLAY DIAGNOSIS ...................................... .119VEHICLE SIGNALS ..........................................
.120
ERROR HISTORY ............................................ .120
DIAGNOSIS BY ERROR HISTORY ................. .120
NAVIGATION .................................................... .122
CAN DIAG SUPPORT MONITOR ....................... .124
OPERATION PROCEDURE ............................. .124
AV Switch Self-Diagnosis Function ...................... .125
Power Supply and Ground Circuit Check for NAVI
Control Unit .......................................................... .126
Power Supply and Ground Circuit Check for Display
Control Unit .......................................................... .127
Power Supply and Ground Circuit Check for Display
Unit ....................................................................... .128
Power Supply and Ground Circuit Check for AV
Switch .................................................................. .130
Vehicle Speed Signal Check for NAVI Control Unit .131
Vehicle Speed Signal Check for Display Control Unit .132
Illumination Signal Check for NAVI Control Unit .. .133
Illumination Signal Check for Display Control Unit .133
Ignition Signal Check for NAVI Control Unit ......... .133
Ignition Signal Check for Display Control Unit ..... .134
Reverse Signal Check for NAVI Control Unit ....... .134
Reverse Signal Check for Display Control Unit ... .134
AV Communication Line Check (Between Display
Control Unit and NAVI Control Unit) ..................... .135
Audio Communication Line Check (Between Dis-
play Control Unit and Audio Unit) ......................... .136
Display Communication Line Check (Between Dis-
play Control Unit and Display Unit) ...................... .138
AV Communication Line Check (Between Display
Control Unit and AV Switch) ................................. .139
CAN Communication Line Check ........................ .140
If NAVI Control Unit Detects That DVD-ROM Map
is Not Inserted ...................................................... .140
If NAVI Control Unit Detects That Inserted DVD-
ROM Map is Malfunctioning or If It is Impossible to
Load Data from DVD-ROM Map .......................... .141
If Connection Between NAVI Control Unit and GPS
Antenna is Malfunctioning .................................... .141
Operating Screen for Audio and A/C is Not Dis-
played When Showing NAVI Screen .................... .142
Color of RGB Image is Not Proper (Only NAVI
Screen Looks Bluish) ........................................... .143
Color of RGB Image is Not Proper (Only NAVI
Screen Looks Reddish) ........................................ .144
Color of RGB Image is Not Proper (Only NAVI
Screen Looks Yellowish) ...................................... .145
Color of RGB Image is Not Proper (All Screens Look
Bluish) .................................................................. .146
Color of RGB Image is Not Proper (All Screens Look
Reddish) ............................................................... .147
Color of RGB Image is Not Proper (All Screens Look
Yellowish) ............................................................. .148
NAVI Screen is Rolling ......................................... .150
Guide Sound is Not Heard ................................... .152
Screen is Not Shown ........................................... .153
A/C Screen is Not Shown (NAVI Screen is Shown) .153
FUEL ECONOMY Screen is Not Shown .............. .153
Average Fuel Economy Displayed is Not Shown (“

AV-8
AUDIO
Revision: November 20092006 QX56
System DescriptionEKS00BI8
Refer to Owner's Manual for audio system operating instructions.
Power is supplied at all times

through 15A fuse [No. 17, located in the fuse block (J/B)]

to subwoofer terminal 6

through 20A fuse [No. 31, located in the fuse and fusible link box]

to audio unit terminal 6

to BOSE speaker amp. terminal 1

to AV switch terminal 1 and

to display control unit terminal 1.
With the ignition switch in the ACC or ON position, power is supplied

through 10A fuse [No. 4, located in the fuse block (J/B)]

to audio unit terminal 10 and

to AV switch terminal 2 and

to display control unit terminal 10.
With the ignition switch in the ON or START position, power is supplied

through 10A fuse [No. 12, located in the fuse block (J/B)]

to display control unit terminal 12.
Ground is supplied through the case of the audio unit.
Ground is also supplied

to subwoofer terminal 5

through body grounds B7 and B19 and

to BOSE speaker amp. terminal 17

to AV switch terminal 5 and

to display unit terminal 1 and

to display control unit terminal 3

through body grounds M57, M61 and M79.
Then audio signals are supplied

through audio unit terminals 1, 2, 3, 4, 13, 14, 15 and 16

to BOSE speaker amp. terminals 23, 24, 25, 26, 27, 28, 29 and 30.
Audio signals are amplified by the BOSE speaker amp.
The amplified audio signals are supplied

through BOSE speaker amp. terminals 2, 3, 9,10,11,12, 13, 14, 15, 16, 18 and 19

to terminals + and - of front door speaker LH and RH and

to terminals + and - of front tweeter LH and RH and

to terminals + and - of center speaker and

to terminals + and - of rear door speaker LH and RH and

to terminals + and - of rear door tweeter LH and RH and

to terminals 1 and 2 of subwoofer.
When one of steering wheel audio control switches is pushed, the resistance in steering switch circuit changes
depending on which button is pushed.
REAR AUDIO REMOTE CONTROL UNIT
Power is supplied

from audio unit terminal 32

to rear audio remote control unit terminal 13.
Ground is supplied

to rear audio remote control unit terminal 15

through body grounds B117 and B132.
Audio signals are supplied

AUDIOAV-9
C
DE
F
G H
I
J
L
M A
B
AV
Revision: November 2009 2006 QX56

through audio unit terminals 26, 27, 28 and 29

to terminals 1, 2, 3, and 4 of rear audio remote control unit.
SATELLITE RADIO TUNER (PRE-WIRING)
NOTE:
The satellite radio pre-wiring allows connection of a satellite radio tuner.
Power is supplied at all times

through 20A fuse [No. 31, located in the fuse and fusible link box]

to satellite radio tuner terminal 32.
With the ignition switch in the ACC or ON position, power is supplied

through 10A fuse [No. 4, located in the fuse block (J/B)]

to satellite radio tuner terminal 36.
Audio signals are supplied

through satellite radio tuner terminals 21, 22, 23 and 24

to terminals 41, 42, 43 and 44 of audio unit.
Ground is supplied through the case of the satellite radio tuner.
SATELLITE RADIO TUNER (FACTORY INSTALLED)
NOTE:
Factory installed satellite radio systems may be identified by the location of the satellite radio tuner (factory
installed) antenna. Factory installed satellite radio antennas are installed on the front of the roof. Dealer
installed antennas may be installed anywhere on the roof.
Power is supplied at all times

through 20A fuse [No. 31, located in the fuse and fusible link box]

to satellite radio tuner (factory installed) terminal 32.
With the ignition switch in the ACC or ON position, power is supplied

through 10A fuse [No. 4, located in the fuse block (J/B)]

to satellite radio tuner (factory installed) terminal 36.
Radio signals are supplied from the satellite radio antenna to satellite radio tuner (factory installed) terminal
37.
Audio signals are supplied

through satellite radio tuner (factory installed) terminals 21, 22, 23 and 24

to terminals 41, 42, 43 and 44 of audio unit.
Ground is supplied through the case of the satellite radio tuner (factory installed).
SPEED SENSITIVE VOLUME SYSTEM
Volume level of this system goes up and down automatically in proportion to the vehicle speed. The control
level can be selected by the customer. Refer to Owner's Manual for operating instructions.

AV-22
AUDIO
Revision: November 20092006 QX56
Terminals and Reference Value for Audio UnitEKS00BIB
Terminal
(Wire color) ItemSignal
input/
output Condition
Reference value
(Approx.) Example of symptom
+ – Ignition
switch Operation
2 (W) 1 (B) Audio sound
signal front
LHOutput ON
Receive audio
signal No sound from front
door speaker LH or
tweeter LH.
4 (Y) 3 (BR) Audio sound
signal front
RHOutput ON
Receive audio
signal No sound from front
door speaker RH or
tweeter RH.
5 (G/W) Ground Antenna
signal
Output ON
–More than 10V Poor radio reception.
6 (Y) Ground Battery
powerInput
–– Battery voltageSystem does not
work properly.
7 (BR) Ground Illumination
control sig-
nalInput ON Illumination con-
trol switch is
operated by light-
ing switch in 1st
position. Changes between 0 and 12V
Audio unit illumina-
tion cannot be con-
trolled.
8 (R/L) Ground Illumination
signal
Input OFF Lighting switch is
in 1st position.
Battery voltageAudio unit illumina-
tion does not come
on when lighting
switch is in 1st posi-
tion.
Lighting switch is
OFF.
3V or less
9 –Shield –– – 0VInterference and dis-
tortion heard from
speakers.
10 (V) Ground ACC signal Input ON –Battery voltage System does not
work properly.
12 (G/W) Ground Amp. ON
signalOutput ON
–More than 6.5V Amp. does not work
properly.
14 (BR) 13 (B/R) Audio sound
signal rear
LHOutput ON
Receive audio
signal No sound from rear
door speaker LH or
rear door tweeter LH.
16 (L) 15 (B/W) Audio sound
signal rear
RH
Output ON
Receive audio
signal No sound from rear
door speaker RH or
rear door tweeter
RH.
SKIA0177E
SKIA0177E
SKIA0177E
SKIA0177E

AUDIOAV-23
C
DE
F
G H
I
J
L
M A
B
AV
Revision: November 2009 2006 QX56
21 (V) GroundRemote
control A
Output ON Audio unit ON
5VRear audio remote
control unit does not
operate properly.
22 (P) Ground Remote
control BOutput ON Audio unit ON
5VRear audio remote
control unit does not
operate properly.
23 (BR/Y) Ground Remote
control COutput ON Audio unit ON
5VRear audio remote
control unit does not
operate properly.
24 (L) Ground Remote
control D
Output ON Audio unit ON
5VRear audio remote
control unit does not
operate properly.
25 (LG) –Remote
control
ground
–– –
0VRear audio remote
control switches do
not function.
27 (O/L) 26 (O) Audio sound
signal LHOutput ON
Receive audio
signal No sound from LH
headphone channel.
29 (W) 28 (W/L) Audio sound
signal RH
Output ON Receive audio
signal No sound from RH
headphone channel.
30 –Shield –– – 0VInterference and dis-
tortion heard from
headphones or rear
audio remote control
unit switches not
operating properly.
31 (O) Ground Remote
control
enable sig-
nalOutput ON Audio unit ON
5VRear audio remote
control unit does not
operate.
32 (V) Ground Remote
control
switch
power sup-
ply
Output ON Audio unit ON
12VRear audio remote
control unit does not
operate.
42 (R) 41 (G) Audio left
channel
sound sig-
nal from sat-
ellite radio
tunerInput ON
Receive audio
signal No sound from satel-
lite radio tuner left
channel.
Terminal
(Wire color) ItemSignal
input/
output Condition
Reference value
(Approx.) Example of symptom
+ – Ignition
switch Operation
SKIA0177E
SKIA0177E
SKIA0177E

AV-24
AUDIO
Revision: November 20092006 QX56
44 (W) 43 (B)Audio right
channel
sound sig-
nal from sat-
ellite radio
tunerInput ON
Receive audio
signal No sound from satel-
lite radio tuner right
channel.
45 –Shield
ground
(audio sig-
nal) –– –
0V–
46 –Shield
ground
(data) –– –
0V–
48 (L) Ground Satellite
radio tuner
request to
audio unitInput ON
Turn audio unit
ON 5VSatellite radio tuner
does not operate
properly.
49 (O/L) Ground Audio RX Input ON Operate audio
volume Satellite radio tuner
audio information
does not display
properly.
50 (W/L) Ground Audio TX Output ON Operate audio
volume Satellite radio tuner
audio information
does not display
properly.
62 (G) 61 (L) Audio in sig-
nal from
bluetooth
control unitInput ON
Receive audio
signal Audio cannot be
heard.
63 (Y) –Mute signal Input ON –– Mute inoperative.
64 –Shield –– – ––
65 (O/L) Ground Audio RX Input ON Operate audio
volume Audio does not oper-
ate properly.
Terminal
(Wire color) ItemSignal
input/
output Condition
Reference value
(Approx.) Example of symptom
+ – Ignition
switch Operation
SKIA0177E
SKIA4403E
SKIA4402E
SKIA0177E
SKIA4403E

AUDIOAV-25
C
DE
F
G H
I
J
L
M A
B
AV
Revision: November 2009 2006 QX56
Terminals and Reference Value for BOSE Speaker Amp.EKS00BIC
66 (W/L) Ground Audio TX Output ONOperate audio
volume Audio does not oper-
ate properly.
67 –Shield –ON – 0VInterference and dis-
tortion heard from
speakers.
70 –Shield –– – 0VInterference and dis-
tortion heard from
speakers.
71 (B) 69 (W) Voice guide
signal
Output ON Press the
"GUIDE/VOICE"
button. Only route guide and
operation guide are
not heard.
72 (W/B) Ground CD eject
signalInput ON Operate EJECT
button 0V
→5V CD will not eject from
audio unit.
73 (Y/B) Ground CD load sig-
nalInput ON
Operate LOAD
button 0V
→5V CD will not load into
audio unit.
Terminal
(Wire color) ItemSignal
input/
output Condition
Reference value
(Approx.) Example of symptom
+ – Ignition
switch Operation
SKIA4402E
SKIA0171J
Terminal
(wire color) ItemSignal
input/
output Condition
Reference value
(Approx.) Example of
symptom
+ – Ignition
switch Operation
1 (Y) Ground Battery Input ––Battery voltageSystem does not
work properly.
9 (SB) 10 (B/Y) Rear door
speaker LH
and rear door
tweeter LHOutput ON
Receive audio
signal No sound from
rear door speaker
LH or rear door
tweeter LH.
11 (O/L) 12 (R/L) Rear door
speaker RH
and rear door
tweeter RHOutput ON
Receive audio
signal No sound from
rear door speaker
RH or rear door
tweeter RH.
SKIA0177E
SKIA0177E

AV-26
AUDIO
Revision: November 20092006 QX56
13 (L/W) 14 (L/R)Front door
speaker LH
and front
tweeter LHOutput ON
Receive audio
signal No sound from
front door speaker
LH or front tweeter
LH.
15 (W/B) 16 (L/B) Front door
speaker RH
and front
tweeter RHOutput ON
Receive audio
signal No sound from
front door speaker
RH or front tweeter
RH.
17 (B) Ground Ground –ON –– –
18 (V) 2 (R) Center
speaker
Output ON Receive audio
signal No sound from
center speaker.
19 (W) 3 (B) Subwoofer Output ON Receive audio
signalNo sound from
subwoofer.
22
(W/G) Ground Subwoofer ON
signal Input ON
–More than 6.5V Subwoofer does
not work properly.
24 (L) 23 (B/W) Audio sound
signal rear RHInput ON
Receive audio
signal No sound from
rear door speaker
RH or rear door
tweeter RH.
26 (BR) 25 (B/R) Audio sound
signal rear LH
Input ON Receive audio
signal No sound from
rear door speaker
LH or rear door
tweeter LH.
Terminal
(wire color) ItemSignal
input/
output Condition
Reference value
(Approx.) Example of
symptom
+ – Ignition
switch Operation
SKIA0177E
SKIA0177E
SKIA0177E
SKIA0177E
SKIA0177E
SKIA0177E

AUDIOAV-27
C
DE
F
G H
I
J
L
M A
B
AV
Revision: November 2009 2006 QX56
28 (Y) 27 (BR)Audio sound
signal front RHInput ON Receive audio
signal No sound from
front door speaker
RH or front tweeter
RH.
30 (W) 29 (B) Audio sound
signal front LHInput ON
Receive audio
signal No sound from
front door speaker
LH or front tweeter
LH.
31 (G/W) Ground Amp. ON sig-
nal
Input ON
–More than 6.5V System does not
work properly.
Terminal
(wire color) ItemSignal
input/
output Condition
Reference value
(Approx.) Example of
symptom
+ – Ignition
switch Operation
SKIA0177E
SKIA0177E

AV-28
AUDIO
Revision: November 20092006 QX56
Terminals and Reference Value for Rear Audio Remote Control UnitEKS00BID
Terminal
(Wire color) ItemSignal
input/
output Condition
Reference value
(Approx.) Example of symptom
+ – Ignition
switch Operation
2 (G) 1 (B) Audio sound
signal LHInput ON Receive audio
signal No sound from LH
headphone channel.
4 (W) 3 (R) Audio sound
signal RHInput ON
Receive audio
signal No sound from RH
headphone channel.
5 –Shield –– – 0VInterference and dis-
tortion heard from
headphones or rear
audio remote control
unit switches not
operating properly.
6 (R/L) Ground Illumination Input ON Lighting switch
ON
12V
Rear audio remote
control unit does not
illuminate.
Lighting switch
OFF 0V
7 (LG) –Remote
control
ground
–– –
0VRear audio remote
control unit switches
do not function.
8 (O) Ground Remote
control
enable sig-
nalInput ON Audio unit ON
5VRear audio remote
control unit does not
operate.
9 (V) Ground Remote
control AInput ON Audio unit ON
5VRear audio remote
control unit does not
operate properly.
10 (P) Ground Remote
control BInput ON Audio unit ON
5VRear audio remote
control unit does not
operate properly.
11
(BR/Y) GroundRemote
control C
Input ON Audio unit ON
5VRear audio remote
control unit does not
operate properly.
12 (L) Ground Remote
control DInput ON Audio unit ON
5VRear audio remote
control unit does not
operate properly.
13 (V) Ground Remote
control
switch
power sup-
plyInput ON Audio unit ON
12VRear audio remote
control does not
operate.
15 (B) –Ground –ON – 0V –
SKIA0177E
SKIA0177E