air conditioning INFINITI QX56 2011 Factory Service Manual

HAC-42
< ECU DIAGNOSIS INFORMATION >[AUTOMATIC AIR CONDITIONING]
A/C AUTO AMP.
ECU DIAGNOSIS INFORMATION
A/C AUTO AMP.
Reference ValueINFOID:0000000006275886
CONSULT-III DATA MONITOR REFERENCE VALUES
Monitor item Condition Value/Status
AMB TEMP SEN Ignition switch ON — Equivalent to ambient tem-
perature
IN-VEH TEMP Ignition switch ON — Equivalent to in-vehicle tem-
perature (front side)
INT TEMP SEN Ignition switch ON — Equivalent to front evapora-
tor fin temperature
SUNLOAD SEN Ignition switch ON — Equivalent to sunload (driver
side)
AMB SEN CAL Ignition switch ON — Equivalent to ambient tem-
perature
IN-VEH CAL Ignition switch ON — Equivalent to in-vehicle tem-
perature (front side)
INT TEMP CAL Ignition switch ON — Equivalent to front evapora-
tor fin temperature
SUNL SEN CAL Ignition switch ON — Equivalent to sunload (driver
side)
COMP REQ SIG Engine: Run at idle after
warming up A/C switch: ON
(Compressor operation sta-
tus)
On
A/C switch: OFF Off
FAN REQ SIG Engine: Run at idle after
warming up Front blower motor: ON On
Front blower motor: OFF Off
FAN DUTY Engine: Run at idle after
warming up Front blower motor: ON 25 – 81
Front blower motor: OFF 0
XM Ignition switch ON — Value according to target air
flow temperature (driver
side)
PASS SUNL CAL Ignition switch ON — Equivalent to sunload (pas-
senger side)
PASS SUNLOAD SEN Ignition switch ON — Equivalent to sunload (pas-
senger side)
PA TARGET A/TEMP Ignition switch ON — Value according to target air
flow temperature (passen-
ger side)
RRIN TEMP SEN Ignition switch ON — Equivalent to in-vehicle tem-
perature (rear side)
RRIN TEMP CAL Ignition switch ON — Equivalent to in-vehicle tem-
perature (rear side)
RR INT TMP CL Ignition switch ON — Equivalent to rear evapora-
tor fin temperature
RRFAN REQ SIG Engine: Run at idle after
warming up Rear blower motor: ON On
Rear blower motor: OFF Off
RR FAN DUTY Engine: Run at idle after
warming up Rear blower motor: ON 25 – 81
Rear blower motor: OFF 0
Revision: 2010 May2011 QX56

A/C AUTO AMP.HAC-43
< ECU DIAGNOSIS INFORMATION > [AUTOMATIC AIR CONDITIONING]
C
D
E
F
G H
J
K L
M A
B
HAC
N
O P
TERMINAL LAYOUT
PHYSICAL VALUES
RR XM Ignition switch ON — Value according to target air
flow temperature (rear side)
ENG COOL TEMP Ignition switch ON — Equivalent to engine coolant
temperature
VEHICLE SPEED Driving — Equivalent to speedometer
reading
Monitor item Condition Value/Status
JMIIA0787ZZ
Te r m i n a l N o .
(Wire color) Description
ConditionVa l u e
(Approx.)
+ − Signal name Input/
Output
1
(L) —CAN-H Input/
Output ——
2
(B) —Ground — — —
3
(Y/G) Ground Battery power supply Input Ignition switch OFF Battery voltage
4
(V) Ground ACC power supply Input Ignition switch ACC Battery voltage
5
*1
(W) Ground
Ionizer (ON/OFF) control
signal
OutputIgnition
switch
ON Front blower
motor: ON
0 V
Front blower
motor: OFF 12 V
6
(V/W) GroundA/C auto amp. connection
recognition signal Output Ignition switch ON 12 V
7
(W/R) Ground Ambient sensor signal Input Ignition switch ON 0 – 4.8 V
Output voltage varies with ambient temperature
8
(GR/L) Ground
Rear in-vehicle sensor sig-
nal Input Ignition switch ON 0 – 4.8 V
Output voltage varies with in-vehi-
cle temperature (rear side)
9
(BR) GroundSunload sensor (driver side)
signal
Input Ignition switch ON 0 – 4.8 V
Output voltage varies with sunload (driver side) amount
10
*1
(V/W) Ground
Exhaust gas / outside odor
detecting sensor signal InputIgnition switch ON
NOTE:
The signal is depending
on measurement environ-
ment of the vehicle
ZJIA1163J
Revision: 2010 May2011 QX56

HAC-44
< ECU DIAGNOSIS INFORMATION >[AUTOMATIC AIR CONDITIONING]
A/C AUTO AMP.
11
(W) GroundCommunication signal
(A/C auto amp.
→Rear A/C
control) Output Ignition switch ON
14
(O/L) GroundFront blower motor control
signal
Output Ignition switch ON
 Front fan speed: 1st
speed (manual)
16
(R/G) Ground Each door motor LIN signal Input/
Output Ignition switch ON
17
(L/Y) GroundEach door motor power sup-
ply
Output Ignition switch ON 12 V
21
(P) —CAN-L
Input/
Output ——
22
(B) —Ground — — —
23
(GR/L) Ground Ignition power supply Input Ignition switch ON Battery voltage
25
*1, *
(R) ———— —
26
(B) — Sensor ground — — —
27
(GR) GroundFront in-vehicle sensor sig-
nal
Input Ignition switch ON 0 – 4.8 V
Output voltage varies with in-vehi- cle temperature (front side)
28
(R) Ground Intake sensor signal Input Ignition switch ON 0 – 4.8 V
Output voltage varies with front evaporator fin temperature
29
(O) Ground
Sunload sensor (passenger
side) signal Input Ignition switch ON 0 – 4.8 V
Output voltage varies with sunload
(passenger side) amount
31
(O/L) GroundCommunication signal
(Rear A/C control
→A/C auto
amp.) Input Ignition switch ON
Te r m i n a l N o .
(Wire color) Description
ConditionVa l u e
(Approx.)
+ − Signal name Input/
Output
SJIA1521J
JSIIA0096ZZ
SJIA1453J
SJIA1522J
Revision: 2010 May2011 QX56

A/C AUTO AMP.HAC-45
< ECU DIAGNOSIS INFORMATION > [AUTOMATIC AIR CONDITIONING]
C
D
E
F
G H
J
K L
M A
B
HAC
N
O P
*1: With ACCS (advanced climate control system)
*2: A/C auto amp. is not used for control.
Fail-safeINFOID:0000000006275887
FAIL-SAFE FUNCTION
If a communication error exists between the A/C auto am p., and the AV control unit and preset switch for 30
seconds or longer, air conditioning is controlled under the following conditions:
When ambient temperature is less than 3 °C (37 °F) and engine coolant temperature is less than 56 °C (133 °F)
When ambient temperature is 3 °C (37 °F) or more, or engine coolant temperature is 56 °C (133 °F) or more
DTC IndexINFOID:0000000006275888
34
(L/O) GroundRear blower motor control
signal Output Ignition switch ON
 Rear fan speed: 1st
speed (manual)
37
(B) —Ground — — —
38
(G/W) Ground Rear A/C relay control signal Output Ignition
switch
ONRear blower
motor: ON
0 V
Rear blower
motor: OFF 12 V
Te r m i n a l N o .
(Wire color) Description
ConditionVa l u e
(Approx.)
+ − Signal name Input/
Output
JSIIA0096ZZ
Compressor : ON
Air outlet : DEF
Air inlet : FRE (Fresh air intake)
Blower fan speed : AUTO
Set temperature : Setting before communication error occurs
Compressor : ON
Air outlet : AUTO
Air inlet : 20% FRE (20% fresh air intake)
Blower fan speed : AUTO
Set temperature : Setting before communication error occurs
DTC Items
(CONSULT-III screen terms) Reference
U1000 CAN COMM CIRCUIT HAC-72, "
DTC Logic"
U1010 CONTROL UNIT (CAN)HAC-73, "DTC Logic"
B2578 IN-VEHICLE SENSORHAC-74, "DTC Logic"
B2579 IN-VEHICLE SENSORHAC-74, "DTC Logic"
B257B AMBIENT SENOR HAC-77, "DTC Logic"
B257C AMBIENT SENOR HAC-77, "DTC Logic"
B2581 INTAKE SENSORHAC-80, "DTC Logic"
B2582 INTAKE SENSORHAC-80, "DTC Logic"
Revision: 2010 May2011 QX56

HAC-46
< ECU DIAGNOSIS INFORMATION >[AUTOMATIC AIR CONDITIONING]
A/C AUTO AMP.
*1: With ACCS (advanced climate control system)
*2: Perform self-diagnosis under sunshine. When performi
ng indoors, aim a light (more than 60 W) at sunload
sensor, otherwise self-diagnosis indicates even though the sunload sensor is functioning normally.
NOTE:
If all of door motor DTCs (B2632, B2633, B2634, B2635, B2636, B2637, B2638, B2639, B263D, B263E,
B263F, B2654, B2655, B2661, B2662, B2663, B2664, B 2665, B2666, B2669, and B266A) are detected, check
door motor communication circuit. Refer to HAC-120, "
Diagnosis Procedure".
B262A*1GAS SENSOR HAC-83, "DTC Logic"
B262B*1GAS SENSORHAC-83, "DTC Logic"
B2630*2SUNLOAD SENSORHAC-86, "DTC Logic"
B2631*2SUNLOAD SENSORHAC-86, "DTC Logic"
B2632 DR AIRMIX DOOR MOT HAC-89, "DTC Logic"
B2633 DR AIRMIX DOOR MOTHAC-89, "DTC Logic"
B2634 PASS AIR MIX DOOR MOTHAC-91, "DTC Logic"
B2635 PASS AIR MIX DOOR MOTHAC-91, "DTC Logic"
B2636 DR VENT DOOR FAILHAC-93, "DTC Logic"
B2637 DR B/L DOOR FAILHAC-93, "DTC Logic"
B2638 DR D/F1 DOOR FAILHAC-93, "DTC Logic"
B2639 DR DEF DOOR FAILHAC-93, "DTC Logic"
B263D FRE DOOR FAIL HAC-95, "DTC Logic"
B263E 20P FRE DOOR FAILHAC-95, "DTC Logic"
B263F REC DOOR FAILHAC-95, "DTC Logic"
B2654 D/F2 DOOR FAILHAC-93, "DTC Logic"
B2655 B/L2 DOOR FAILHAC-93, "DTC Logic"
B2657*1GAS SENSOR CIRCUITHAC-83, "DTC Logic"
B2658*1GAS SENSOR CIRCUITHAC-83, "DTC Logic"
B2661 UPPER VENT DOOR MOT HAC-97, "DTC Logic"
B2662 UPPER VENT DOOR MOTHAC-97, "DTC Logic"
B2663 UPPER VENT DOOR MOTHAC-97, "DTC Logic"
B2664 REAR AIR MIX DOOR MOTHAC-99, "DTC Logic"
B2665 REAR AIR MIX DOOR MOTHAC-99, "DTC Logic"
B2666 REAR MODE DOOR MOTHAC-101, "DTC Logic"
B2667*2PASS SUNLOAD SENSORHAC-103, "DTC Logic"
B2668*2PASS SUNLOAD SENSORHAC-103, "DTC Logic"
B2669 REAR MODE DOOR MOT HAC-101, "DTC Logic"
B266A REAR MODE DOOR MOT HAC-101, "DTC Logic"
B266B REAR IN-VEHICLE SENHAC-106, "DTC Logic"
B266C REAR IN-VEHICLE SEN HAC-106, "DTC Logic"
B27B0 A/C AUTO AMP.HAC-109, "DTC Logic"
DTCItems
(CONSULT-III screen terms) Reference
Revision: 2010 May2011 QX56

ECM, IPDM E/RHAC-47
< ECU DIAGNOSIS INFORMATION > [AUTOMATIC AIR CONDITIONING]
C
D
E
F
G H
J
K L
M A
B
HAC
N
O P
ECM, IPDM E/R
List of ECU ReferenceINFOID:0000000006275889
ECU Reference
ECM EC-72, "
Reference Value"
EC-93, "Fail-safe"
EC-96, "DTC Inspection Priority Chart"
EC-98, "DTC Index"
IPDM E/R
PCS-15, "
Reference Value"
PCS-21, "Fail-Safe"
PCS-22, "DTCIndex"
Revision: 2010 May2011 QX56

HAC-48
< WIRING DIAGRAM >[AUTOMATIC AIR CONDITIONING]
AUTOMATIC AIR CONDITIONING SYSTEM
WIRING DIAGRAM
AUTOMATIC AIR CO
NDITIONING SYSTEM
Wiring DiagramINFOID:0000000006275890
JCIWM0795GB
Revision: 2010 May2011 QX56

AUTOMATIC AIR CONDITIONING SYSTEMHAC-49
< WIRING DIAGRAM > [AUTOMATIC AIR CONDITIONING]
C
D
E
F
G H
J
K L
M A
B
HAC
N
O P
JCIWM0796GB
Revision: 2010 May2011 QX56

HAC-50
< WIRING DIAGRAM >[AUTOMATIC AIR CONDITIONING]
AUTOMATIC AIR CONDITIONING SYSTEM
JCIWM0797GB
Revision: 2010 May2011 QX56

AUTOMATIC AIR CONDITIONING SYSTEMHAC-51
< WIRING DIAGRAM > [AUTOMATIC AIR CONDITIONING]
C
D
E
F
G H
J
K L
M A
B
HAC
N
O P
JCIWM0798GB
Revision: 2010 May2011 QX56