display INFINITI QX56 2011 Factory Service Manual
[x] Cancel search | Manufacturer: INFINITI, Model Year: 2011, Model line: QX56, Model: INFINITI QX56 2011Pages: 5598, PDF Size: 94.53 MB
Page 628 of 5598
![INFINITI QX56 2011 Factory Service Manual
C118E ACCUMULATORBRC-111
< DTC/CIRCUIT DIAGNOSIS > [WITH VDC]
C
D
E
G H
I
J
K L
M A
B
BRC
N
O P
C118E ACCUMULATOR
DTC LogicINFOID:0000000006222636
DTC DETECTION LOGIC
CAUTION:
The VDC warning lamp, A](/img/42/57033/w960_57033-627.png "INFINITI QX56 2011 Factory Service Manual
C118E ACCUMULATORBRC-111
< DTC/CIRCUIT DIAGNOSIS > [WITH VDC]
C
D
E
G H
I
J
K L
M A
B
BRC
N
O P
C118E ACCUMULATOR
DTC LogicINFOID:0000000006222636
DTC DETECTION LOGIC
CAUTION:
The VDC warning lamp, A")
C118E ACCUMULATORBRC-111
< DTC/CIRCUIT DIAGNOSIS > [WITH VDC]
C
D
E
G H
I
J
K L
M A
B
BRC
N
O P
C118E ACCUMULATOR
DTC LogicINFOID:0000000006222636
DTC DETECTION LOGIC
CAUTION:
The VDC warning lamp, ABS warning lamp and br ake warning lamp turns ON and DTC “C118E” may
be detected in self-diagnosis result of “ABS” when the brake pedal is excessively operated, such as
air bleeding. This is not a system malfunction because this occurs due to the temporary decrease in
accumulator fluid pressure. The system returns to normal condition when the accumulator fluid pres-
sure reaches the specified pressure with the ignition switch ON and the VDC warning lamp, ABS warn-
ing lamp, and brake warning lamp turn OFF. After these steps, ABS self-diagnosis results are erased.
Diagnosis ProcedureINFOID:0000000006222637
1.ERASE SELF-DIAGNOSIS RESULT
CAUTION:
The VDC warning lamp, ABS warning lamp and br ake warning lamp turns ON and DTC “C118E” may
be detected in self-diagnosis result of “ABS” when the brake pedal is excessively operated, such as
air bleeding. This is not a system malfunction because this occurs due to the temporary decrease in
accumulator fluid pressure. The system returns to normal condition when the accumulator fluid pres-
sure reaches the specified pressure with the ignition switch ON and the VDC warning lamp, ABS warn-
ing lamp, and brake warning lamp turn OFF. After these steps, ABS self-diagnosis results are erased.
With CONSULT-III.
1. Erase Self-diagnosis result for “ABS”.
2. Turn the ignition switch OFF.
3. Depress brake pedal to full stroke 20 times or more.
4. Start the engine, and then wait 2 minutes or more.
5. Check VDC warning lamp, ABS warning lamp and brake warning lamp turns OFF.
6. Perform self-diagnosis for “ABS”.
Is any DTC detected?
YES >> Check the DTC. Refer to BRC-51, "DTC Index".
NO >> INSPECTION END
DTC Display Item Malfunction detected condition Possible causes
C118E ACCUMULATOR PRESS When performing excessive brake pedal operation
with the vehicle stopped. [When accumulator fluid
pressure reaches 11.43 MPa (114 bar, 116.6 kg/cm
2,
1657 psi) after reaching 17.3 MPa (173 bar, 176.5 kg/
cm
2, 2509 psi.] —
Revision: 2010 May2011 QX56
Page 629 of 5598
![INFINITI QX56 2011 Factory Service Manual
BRC-112
< DTC/CIRCUIT DIAGNOSIS >[WITH VDC]
U1000 CAN COMM CIRCUIT
U1000 CAN COMM CIRCUIT
DescriptionINFOID:0000000006222638
CAN communication allows a high rate of information transmission through t](/img/42/57033/w960_57033-628.png "INFINITI QX56 2011 Factory Service Manual
BRC-112
< DTC/CIRCUIT DIAGNOSIS >[WITH VDC]
U1000 CAN COMM CIRCUIT
U1000 CAN COMM CIRCUIT
DescriptionINFOID:0000000006222638
CAN communication allows a high rate of information transmission through t")
BRC-112
< DTC/CIRCUIT DIAGNOSIS >[WITH VDC]
U1000 CAN COMM CIRCUIT
U1000 CAN COMM CIRCUIT
DescriptionINFOID:0000000006222638
CAN communication allows a high rate of information transmission through the two communication lines
(CAN-H line and CAN-L line) connecting various control
units in the system. Each control unit transmits/
receives data but selectively reads required data only.
DTC LogicINFOID:0000000006222639
DTC DETECTION LOGIC
DTC CONFIRMATION PROCEDURE
1.CHECK DTC DETECTION
With CONSULT-III
1. Turn the ignition switch OFF to ON.
2. Perform self-diagnosis for “ABS”.
Is DTC
“U1000” detected?
YES >> Proceed to diagnosis procedure. Refer to BRC-112, "Diagnosis Procedure".
NO >> INSPECTION END
Diagnosis ProcedureINFOID:0000000006222640
Go to LAN-18, "Trouble Diagnosis Flow Chart".
DTC Display Item Malfunction detected condition Possible causes
U1000 CAN COMM CIRCUIT When CAN communication signal is not continuously
received for 2 seconds or more CAN communication system mal-
function
Revision: 2010 May2011 QX56
Page 639 of 5598
![INFINITI QX56 2011 Factory Service Manual
BRC-122
< DTC/CIRCUIT DIAGNOSIS >[WITH VDC]
ABS WARNING LAMP
ABS WARNING LAMP
Component Function CheckINFOID:0000000006222649
1.CHECK ABS WARNING LAMP FUNCTION
Check that ABS warning lamp in combinat](/img/42/57033/w960_57033-638.png "INFINITI QX56 2011 Factory Service Manual
BRC-122
< DTC/CIRCUIT DIAGNOSIS >[WITH VDC]
ABS WARNING LAMP
ABS WARNING LAMP
Component Function CheckINFOID:0000000006222649
1.CHECK ABS WARNING LAMP FUNCTION
Check that ABS warning lamp in combinat")
BRC-122
< DTC/CIRCUIT DIAGNOSIS >[WITH VDC]
ABS WARNING LAMP
ABS WARNING LAMP
Component Function CheckINFOID:0000000006222649
1.CHECK ABS WARNING LAMP FUNCTION
Check that ABS warning lamp in combination meter turns ON for approx. 1 second after ignition switch is
turned ON.
CAUTION:
Never start engine.
Is the inspection result normal?
YES >> INSPECTION END
NO >> Proceed to diagnosis procedure. Refer to BRC-122, "
Diagnosis Procedure".
Diagnosis ProcedureINFOID:0000000006222650
1.CHECK ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT) POWER SUPPLY AND GROUND CIR-
CUIT
Perform the trouble diagnosis for ABS actuator and elec tric unit (control unit) power supply and ground circuit.
Refer to BRC-113, "
Diagnosis Procedure".
Is the inspection result normal?
YES >> GO TO 2.
NO >> Repair or replace error-detected parts.
2.PERFORM THE SELF-DIAGNOSIS
With CONSULT-III.
Perform self-diagnosis for “ABS”.
Is any DTC detected?
YES >> Check the DTC. Refer to BRC-51, "DTC Index".
NO >> GO TO 3.
3.CHECK ABS WARNING LAMP SIGNAL
With CONSULT-III.
1. Select “ABS”, “DATA MONITOR” and “ABS WARN LAMP” according to this order.
2. Turn the ignition switch OFF.
3. Check that data monitor displays “On” for approx. 1 second after ignition switch is turned ON and then
changes to “Off”.
CAUTION:
Never start engine.
Is the inspection result normal?
YES >> GO TO 4.
NO >> Replace ABS actuator and electric unit (control unit). Refer to BRC-137, "
Removal and Installa-
tion".
4.CHECK COMBINATION METER
Check combination meter. Refer to MWI-30, "
CONSULT-III Function".
Is the inspection result normal?
YES >> Replace ABS actuator and electr ic unit (control unit). Refer to BRC-137, "Removal and Installa-
tion".
NO >> Repair or replace combination meter. Refer to MWI-85, "
Removal and Installation".
Revision: 2010 May2011 QX56
Page 640 of 5598
![INFINITI QX56 2011 Factory Service Manual
BRAKE WARNING LAMPBRC-123
< DTC/CIRCUIT DIAGNOSIS > [WITH VDC]
C
D
E
G H
I
J
K L
M A
B
BRC
N
O P
BRAKE WARNING LAMP
Component Function CheckINFOID:0000000006222651
1.CHECK BRAKE WARNING LAMP FUNCTION](/img/42/57033/w960_57033-639.png "INFINITI QX56 2011 Factory Service Manual
BRAKE WARNING LAMPBRC-123
< DTC/CIRCUIT DIAGNOSIS > [WITH VDC]
C
D
E
G H
I
J
K L
M A
B
BRC
N
O P
BRAKE WARNING LAMP
Component Function CheckINFOID:0000000006222651
1.CHECK BRAKE WARNING LAMP FUNCTION")
BRAKE WARNING LAMPBRC-123
< DTC/CIRCUIT DIAGNOSIS > [WITH VDC]
C
D
E
G H
I
J
K L
M A
B
BRC
N
O P
BRAKE WARNING LAMP
Component Function CheckINFOID:0000000006222651
1.CHECK BRAKE WARNING LAMP FUNCTION (1)
Check that brake warning lamp in combination meter turns ON for approx. 1 second after ignition switch is
turned ON.
CAUTION:
Never start engine.
Is the inspection result normal?
YES >> GO TO 2.
NO >> Proceed to diagnosis procedure. Refer to BRC-123, "
Diagnosis Procedure".
2.CHECK BRAKE WARNING LAMP FUNCTION (2)
Check that brake warning lamp in combination meter turns ON/OFF when parking brake is operated.
NOTE:
Brake warning lamp turns ON when parking brake is operated (when parking brake switch is ON).
Is the inspection result normal?
YES >> GO TO 3.
NO >> Check parking brake switch system. Refer to BRC-117, "
Diagnosis Procedure".
3.CHECK BRAKE WARNING LAMP FUNCTION (3)
Check that brake warning lamp in combination meter turns ON/OFF when brake fluid level switch is operated
while brake fluid level in reservoir tank is with the specified level.
NOTE:
Brake warning lamp turns ON when brake fluid is less than the specified level (when brake fluid level switch is
ON).
Is the inspection result normal?
YES >> INSPECTION END
NO >> Check brake fluid level switch system. Refer to BRC-103, "
Diagnosis Procedure".
Diagnosis ProcedureINFOID:0000000006222652
1.CHECK ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT) POWER SUPPLY AND GROUND CIR-
CUIT
Perform the trouble diagnosis for ABS actuator and elec tric unit (control unit) power supply and ground circuit.
Refer to BRC-113, "
Diagnosis Procedure".
Is the inspection result normal?
YES >> GO TO 2.
NO >> Repair or replace error-detected parts.
2.PERFORM THE SELF-DIAGNOSIS
With CONSULT-III.
Perform self-diagnosis for “ABS”.
Is any DTC detected?
YES >> Check the DTC. Refer to BRC-51, "DTC Index".
NO >> GO TO 3.
3.CHECK BRAKE WARNING LAMP SIGNAL
With CONSULT-III.
1. Select “ABS”, “DATA MONITOR” and “EBD WARN LAMP” according to this order.
2. Turn the ignition switch OFF.
3. Check that data monitor displays “On” for approx. 1 second after ignition switch is turned ON and then changes to “Off”.
CAUTION:
Never start engine.
Is the inspection result normal?
Revision: 2010 May2011 QX56
Page 642 of 5598
![INFINITI QX56 2011 Factory Service Manual
VDC WARNING LAMPBRC-125
< DTC/CIRCUIT DIAGNOSIS > [WITH VDC]
C
D
E
G H
I
J
K L
M A
B
BRC
N
O P
VDC WARNING LAMP
Component Function CheckINFOID:0000000006222653
1.CHECK VDC WARNING LAMP FUNCTION
Check](/img/42/57033/w960_57033-641.png "INFINITI QX56 2011 Factory Service Manual
VDC WARNING LAMPBRC-125
< DTC/CIRCUIT DIAGNOSIS > [WITH VDC]
C
D
E
G H
I
J
K L
M A
B
BRC
N
O P
VDC WARNING LAMP
Component Function CheckINFOID:0000000006222653
1.CHECK VDC WARNING LAMP FUNCTION
Check")
VDC WARNING LAMPBRC-125
< DTC/CIRCUIT DIAGNOSIS > [WITH VDC]
C
D
E
G H
I
J
K L
M A
B
BRC
N
O P
VDC WARNING LAMP
Component Function CheckINFOID:0000000006222653
1.CHECK VDC WARNING LAMP FUNCTION
Check that VDC warning lamp in combination meter turns ON for approx. 1 second after ignition switch is
turned ON.
CAUTION:
Never start engine.
Is the inspection result normal?
YES >> INSPECTION END
NO >> Proceed to diagnosis procedure. Refer to BRC-125, "
Diagnosis Procedure".
Diagnosis ProcedureINFOID:0000000006222654
1.CHECK ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT) POWER SUPPLY AND GROUND CIR-
CUIT
Perform the trouble diagnosis for ABS actuator and elec tric unit (control unit) power supply and ground circuit.
Refer to BRC-113, "
Diagnosis Procedure".
Is the inspection result normal?
YES >> GO TO 2.
NO >> Repair or replace error-detected parts.
2.PERFORM THE SELF-DIAGNOSIS
With CONSULT-III.
Perform self-diagnosis for “ABS”.
Is any DTC detected?
YES >> Check the DTC. Refer to BRC-51, "DTC Index".
NO >> GO TO 3.
3.CHECK VDC WARNING LAMP SIGNAL
With CONSULT-III.
1. Select “ABS”, “DATA MONITOR” and “SLI P/VDC LAMP” according to this order.
2. Turn the ignition switch OFF.
3. Check that data monitor displays “On” for approx. 1 second after ignition switch is turned ON and then
changes to “Off”.
CAUTION:
Never start engine.
Is the inspection result normal?
YES >> GO TO 4.
NO >> Replace ABS actuator and electric unit (control unit). Refer to BRC-137, "
Removal and Installa-
tion".
4.CHECK COMBINATION METER
Check combination meter. Refer to MWI-30, "
CONSULT-III Function".
Is the inspection result normal?
YES >> Replace ABS actuator and electric unit (control unit). Refer to BRC-137, "Removal and Installa-
tion".
NO >> Repair or replace combination meter. Refer to MWI-85, "
Removal and Installation".
Revision: 2010 May2011 QX56
Page 643 of 5598
![INFINITI QX56 2011 Factory Service Manual
BRC-126
< DTC/CIRCUIT DIAGNOSIS >[WITH VDC]
VDC OFF INDICATOR LAMP
VDC OFF INDICATOR LAMP
Component Function CheckINFOID:0000000006222655
1.CHECK VDC OFF INDICATO
R LAMP FUNCTION (1)
Check that VDC O](/img/42/57033/w960_57033-642.png "INFINITI QX56 2011 Factory Service Manual
BRC-126
< DTC/CIRCUIT DIAGNOSIS >[WITH VDC]
VDC OFF INDICATOR LAMP
VDC OFF INDICATOR LAMP
Component Function CheckINFOID:0000000006222655
1.CHECK VDC OFF INDICATO
R LAMP FUNCTION (1)
Check that VDC O")
BRC-126
< DTC/CIRCUIT DIAGNOSIS >[WITH VDC]
VDC OFF INDICATOR LAMP
VDC OFF INDICATOR LAMP
Component Function CheckINFOID:0000000006222655
1.CHECK VDC OFF INDICATO
R LAMP FUNCTION (1)
Check that VDC OFF indicator lamp in combination me ter turns ON for approx. 1 second after ignition switch
is turned ON.
CAUTION:
Never start engine.
Is the inspection result normal?
YES >> GO TO 2.
NO >> Proceed to diagnosis procedure. Refer to BRC-126, "
Diagnosis Procedure"
2.CHECK VDC WARNING LAMP FUNCTION (2)
Check that VDC OFF indicator lamp in combination meter turns ON/OFF when VDC OFF switch is operated.
Is the inspection result normal?
YES >> INSPECTION END
NO >> Check VDC OFF switch system. Refer to BRC-119, "
Diagnosis Procedure".
Diagnosis ProcedureINFOID:0000000006222656
1.CHECK ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT) POWER SUPPLY AND GROUND CIR-
CUIT
Perform the trouble diagnosis for ABS actuator and elec tric unit (control unit) power supply and ground circuit.
Refer to BRC-113, "
Diagnosis Procedure".
Is the inspection result normal?
YES >> GO TO 2.
NO >> Repair or replace error-detected parts.
2.CHECK VDC OFF INDICATOR LAMP SIGNAL (1)
With CONSULT-III.
1. Select “ABS”, “DATA MONITOR” and “OFF LAMP” according to this order.
2. Turn the ignition switch OFF.
3. Check that data monitor displays “On” for approx. 1 second after ignition switch is turned ON and then
changes to “Off”.
CAUTION:
Never start engine.
Is the inspection result normal?
YES >> GO TO 3.
NO >> Replace ABS actuator and electric unit (control unit). Refer to BRC-137, "
Removal and Installa-
tion".
3.CHECK VDC OFF INDICATOR LAMP SIGNAL (2)
With CONSULT-III.
1. Select “ABS”, “DATA MONITOR” and “OFF LAMP” according to this order.
2. Check that data monitor displays “On” or “Off” each time when VDC OFF switch is operated.
Is the inspection result normal?
YES >> GO TO 4.
NO >> Check VDC OFF switch system. Refer to BRC-119, "
Diagnosis Procedure".
4.CHECK COMBINATION METER
Check combination meter. Refer to MWI-30, "
CONSULT-III Function".
Is the inspection result normal?
YES >> Replace ABS actuator and electr ic unit (control unit). Refer to BRC-137, "Removal and Installa-
tion".
NO >> Repair or replace combination meter. Refer to MWI-85, "
Removal and Installation".
Revision: 2010 May2011 QX56
Page 659 of 5598
![INFINITI QX56 2011 Factory Service Manual
BRC-142
< SYSTEM DESCRIPTION >[BRAKE ASSIST (WITH PREVIEW FUNCTION)]
COMPONENT PARTS
SYSTEM DESCRIPTION
COMPONENT PARTS
Component Parts LocationINFOID:0000000006248456
1. ICC steering switch 2. Infor](/img/42/57033/w960_57033-658.png "INFINITI QX56 2011 Factory Service Manual
BRC-142
< SYSTEM DESCRIPTION >[BRAKE ASSIST (WITH PREVIEW FUNCTION)]
COMPONENT PARTS
SYSTEM DESCRIPTION
COMPONENT PARTS
Component Parts LocationINFOID:0000000006248456
1. ICC steering switch 2. Infor")
BRC-142
< SYSTEM DESCRIPTION >[BRAKE ASSIST (WITH PREVIEW FUNCTION)]
COMPONENT PARTS
SYSTEM DESCRIPTION
COMPONENT PARTS
Component Parts LocationINFOID:0000000006248456
1. ICC steering switch 2. Information display, ICC system
warning lamp, IBA OFF indicator
lamp, buzzer
(On the combination meter)3. BCM
Refer to BCS-4, "
BODY CONTROL
SYSTEM : Component Parts Loca-
tion"
4. Transfer control unit
Refer to DLN-10, "
Component Parts
Location"
5. ICC brake hold relay 6. ECM
Refer to EC-16, "
Component Parts
Location"
7. ICC sensor 8. TCM
Refer to TM-10, "
A/T CONTROL
SYSTEM : Component Parts Loca-
tion"
9. ABS actuator and el ectric unit (con-
trol unit)
Refer to BRC-10, "
Component Parts
Location"
10. Stop lamp switch 11. ICC brake switch 12. IBA OFF switch
JSOIA0362ZZ
Revision: 2010 May2011 QX56
Page 661 of 5598
![INFINITI QX56 2011 Factory Service Manual
BRC-144
< SYSTEM DESCRIPTION >[BRAKE ASSIST (WITH PREVIEW FUNCTION)]
COMPONENT PARTS
NOTE:
Only IBA system uses
Combination meter
××××Performs the following operations using the signals received](/img/42/57033/w960_57033-660.png "INFINITI QX56 2011 Factory Service Manual
BRC-144
< SYSTEM DESCRIPTION >[BRAKE ASSIST (WITH PREVIEW FUNCTION)]
COMPONENT PARTS
NOTE:
Only IBA system uses
Combination meter
××××Performs the following operations using the signals received")
BRC-144
< SYSTEM DESCRIPTION >[BRAKE ASSIST (WITH PREVIEW FUNCTION)]
COMPONENT PARTS
NOTE:
Only IBA system uses
Combination meter
××××Performs the following operations using the signals received from
the ADAS control unit via the CAN communication
Displays the ICC system operation status using the meter dis-
play signal
Illuminates the ICC system warning lamp using the ICC warning
lamp signal
Illuminates the IBA OFF indicator lamp using the IBA OFF indi- cator lamp signal
Operates the buzzer (ICC warning chime) using the buzzer out- put signal
ICC steering switch ×× ICC steering switch allows the ON/OFF of the Intelligent Cruise
Control and the settings of a vehicle speed and distance be-
tween vehicles
ICC steering switch signal is transmitted to ECM. ECM transmits the signal to the ADAS control unit via CAN communication
ICC brake switch ×××× ICC brake switch is turned OFF and stop lamp switch is turned
ON, when depressing the brake pedal
ICC brake switch signal is input to ECM. These signals are transmitted from ECM to ADAS control unit via CAN communi-
cation
Stop lamp switch signal is input to ECM and ABS actuator and electric unit (control unit). These signals are transmitted from
ECM and ABS actuator and electric unit (control unit) to ADAS
control unit via CAN communication
St op la mp sw i tc h
××××
ICC brake hold relay ××ICC brake hold relay activates the stop lamp by ICC brake hold re-
lay drive signal (stop lamp drive signal) outputted by the ADAS
control unit
Transfer control unit ××××Transfer control unit transmits a mode selection state of 4WD shift
switch to the ADAS control unit via CAN communication
IBA OFF switch ×
NoteIBA OFF switch signal is input to the ADAS control unit
Steering angle sensor ×Measures the rotation amount, rotation speed, and rotation direc-
tion of steering wheel, and then transmits them to ADAS control
unit via CAN communication
Component
Function
Description
Vehicle-to-vehicle distance control mode
Conventional (fixed speed) cruise control mode Intelligent Brake Assist (IBA)
Brake Assist (with preview function)
Revision: 2010 May2011 QX56
Page 666 of 5598
![INFINITI QX56 2011 Factory Service Manual
COMPONENT PARTSBRC-149
< SYSTEM DESCRIPTION > [INTELLIGENT BRAKE ASSIST]
C
D
E
G H
I
J
K L
M A
B
BRC
N
O P
SYSTEM DESCRIPTION
COMPONENT PARTS
Component Parts LocationINFOID:0000000006248458
1. ICC st](/img/42/57033/w960_57033-665.png "INFINITI QX56 2011 Factory Service Manual
COMPONENT PARTSBRC-149
< SYSTEM DESCRIPTION > [INTELLIGENT BRAKE ASSIST]
C
D
E
G H
I
J
K L
M A
B
BRC
N
O P
SYSTEM DESCRIPTION
COMPONENT PARTS
Component Parts LocationINFOID:0000000006248458
1. ICC st")
COMPONENT PARTSBRC-149
< SYSTEM DESCRIPTION > [INTELLIGENT BRAKE ASSIST]
C
D
E
G H
I
J
K L
M A
B
BRC
N
O P
SYSTEM DESCRIPTION
COMPONENT PARTS
Component Parts LocationINFOID:0000000006248458
1. ICC steering switch 2. Information display, ICC system warning lamp, IBA OFF indicator
lamp, buzzer
(On the combination meter)3. BCM
Refer to BCS-4, "
BODY CONTROL
SYSTEM : Compon ent Parts Loca-
tion"
4. Transfer control unit
Refer to DLN-10, "
Component Parts
Location"
5. ICC brake hold relay 6. ECM
Refer to EC-16, "
Component Parts
Location"
7. ICC sensor 8. TCM
Refer to TM-10, "
A/T CONTROL
SYSTEM : Compon ent Parts Loca-
tion"
9. ABS actuator and electric unit (con-
trol unit)
Refer to BRC-10, "
Component Parts
Location"
10. Stop lamp switch 11. ICC brake switch 12. IBA OFF switch
JSOIA0362ZZ
Revision: 2010 May2011 QX56
Page 668 of 5598
![INFINITI QX56 2011 Factory Service Manual
COMPONENT PARTSBRC-151
< SYSTEM DESCRIPTION > [INTELLIGENT BRAKE ASSIST]
C
D
E
G H
I
J
K L
M A
B
BRC
N
O P
NOTE:
Only IBA system uses
Combination meter ××××Performs the following operations using](/img/42/57033/w960_57033-667.png "INFINITI QX56 2011 Factory Service Manual
COMPONENT PARTSBRC-151
< SYSTEM DESCRIPTION > [INTELLIGENT BRAKE ASSIST]
C
D
E
G H
I
J
K L
M A
B
BRC
N
O P
NOTE:
Only IBA system uses
Combination meter ××××Performs the following operations using")
COMPONENT PARTSBRC-151
< SYSTEM DESCRIPTION > [INTELLIGENT BRAKE ASSIST]
C
D
E
G H
I
J
K L
M A
B
BRC
N
O P
NOTE:
Only IBA system uses
Combination meter ××××Performs the following operations using the signals received from
the ADAS control unit via the CAN communication
Displays the ICC system operation status using the meter dis-
play signal
Illuminates the ICC system warning lamp using the ICC warning
lamp signal
Illuminates the IBA OFF indicator lamp using the IBA OFF indi- cator lamp signal
Operates the buzzer (ICC warning chime) using the buzzer out- put signal
ICC steering switch ×× ICC steering switch allows the ON/OFF of the Intelligent Cruise
Control and the settings of a vehicle speed and distance be-
tween vehicles
ICC steering switch signal is transmitted to ECM. ECM transmits the signal to the ADAS control unit via CAN communication
ICC brake switch ×××× ICC brake switch is turned OFF and stop lamp switch is turned
ON, when depressing the brake pedal
ICC brake switch signal is input to ECM. These signals are transmitted from ECM to ADAS control unit via CAN communi-
cation
Stop lamp switch signal is in put to ECM and ABS actuator and
electric unit (control unit). These signals are transmitted from
ECM and ABS actuator and electric unit (control unit) to ADAS
control unit via CAN communication
Stop lamp switch
××××
ICC brake hold relay ××ICC brake hold relay activates the stop lamp by ICC brake hold re-
lay drive signal (stop lamp drive signal) outputted by the ADAS
control unit
Transfer control unit ××××Transfer control unit transmits a mode selection state of 4WD shift
switch to the ADAS control unit via CAN communication
IBA OFF switch ×
NoteIBA OFF switch signal is input to the ADAS control unit
Steering angle sensor ×Measures the rotation amount, rotation speed, and rotation direc-
tion of steering wheel, and then transmits them to ADAS control
unit via CAN communication
Component
Function
Description
Vehicle-to-vehicle distance control mode
Conventional (fixed speed) cruise control mode Intelligent Brake Assist (IBA)
Brake Assist (with preview function)
Revision: 2010 May2011 QX56