torque ISUZU TF SERIES 2004 Workshop Manual

ISUZU TF SERIES 2004 Workshop Manual TF SERIES 2004 ISUZU ISUZU https://www.carmanualsonline.info/img/61/57180/w960_57180-0.png ISUZU TF SERIES 2004 Workshop Manual

Page 24 of 4264

ISUZU TF SERIES 2004  Workshop Manual 9A-4  SUPPLEMENTAL RESTRAINT SYSTEM
 
Service Precaution 
WARNING: THIS VEHICLE HAS A SUPPLEMENTAL 
RESTRAINT SYSTEM (SRS). REFER TO THE SRS 
COMPONENT AND WIRING LOCATION VIEW IN 
ORDER TO DETERMINE

Page 28 of 4264

ISUZU TF SERIES 2004  Workshop Manual 9A-8  SUPPLEMENTAL RESTRAINT SYSTEM
 
The SRS control unit is connected to the SRS wiring 
harness by a 52–pin connector.   This harness 
connector uses a shorting clip across certain terminals 
in

Page 47 of 4264

ISUZU TF SERIES 2004  Workshop Manual SUPPLEMENTAL RESTRAINT SYSTEM  9A-27
 
Service Precautions for SRS 
Component Service 
CAUTION:  When fasteners are removed, always
reinstall them at the same location from which
they were removed.  I

Page 50 of 4264

ISUZU TF SERIES 2004  Workshop Manual 9A-30  SUPPLEMENTAL RESTRAINT SYSTEM
 
SRS Control Unit 
  5. Remove the three SRS control unit fixing bolts and 
remove SRS control unit. 
  
 
RTW49JSH000101
Legent 
(1) SRS control unit 
(2) SRS Ha

Page 56 of 4264

ISUZU TF SERIES 2004  Workshop Manual 9A-36  SUPPLEMENTAL RESTRAINT SYSTEM
 
Installation 
 1. Install the steering wheel and align the setting
marks. 
060R300024
NOTE: Confirm SRS and Horn harness connector is 
fixed by the steering whee

Page 59 of 4264

ISUZU TF SERIES 2004  Workshop Manual SUPPLEMENTAL RESTRAINT SYSTEM  9A-39
 
NOTE: Confirm SRS and Horn harness connector is 
fixed by the steering wheel. 
RTW33BSH000601
 9. Tighten the steering  wheel fixing nut to the 
specified torque

Page 61 of 4264

ISUZU TF SERIES 2004  Workshop Manual SUPPLEMENTAL RESTRAINT SYSTEM  9A-41
 
  7. Remove the driver knee bolster assembly. 
  
 
RTW49JSH000401
Legend 
 (1) RHD 
 (2) LHD 
 
  8. Remove the steering column cover. 
  9. Disconnect the wiri

Page 62 of 4264

ISUZU TF SERIES 2004  Workshop Manual 9A-42  SUPPLEMENTAL RESTRAINT SYSTEM
 
  4. Tighten the universal joint to the  specified  torque.
Torque: 31 N
 m (3.2 kg
 m/23 lb ft) 
  5. Install steering lock cylinder assembly. 
  6. Con

Page 63 of 4264

ISUZU TF SERIES 2004  Workshop Manual SUPPLEMENTAL RESTRAINT SYSTEM  9A-43
 
NOTE: Confirm SRS and Horn harness connector is 
fixed by the steering wheel. 
RTW33BSH000601
14.Tighten the steering wheel fixing nut to the
specified torque.

Page 65 of 4264

ISUZU TF SERIES 2004  Workshop Manual SUPPLEMENTAL RESTRAINT SYSTEM  9A-45
 
Installation 
 1. Connect passenger air bag assembly harness
connector. 
  2. Install passenger air bag assembly. 
  3. Install passenger air bag assembly fixing
Page:   1-10 11-20 21-30 31-40 41-50 ... 580 next >