differential ISUZU TFS SERIES 1997 Repair Manual

FRONT WHEEL DRIVE 4C1-75
2. Bolt ; Transfer Side
Torque N
m (kgfm/lbft)
Bolt size M10 62.8 3.9 (6.4 0.4/46.3 2.9)
1. Bolt ; Differential Side
Torque N
m (kgfm/lbft)
Bolt size M8 35.3 2.9 (3.6 0.3 / 26 2.2)

4C1-84 FRONT WHEEL DRIVE
4. NOISES IN FRONT AXLE
Checkpoint Trouble Cause Countermeasure
Replenish the gear oilInsufficient gear oil NG
Replace the wheel bearing
Replace the pinion shaft
bearing
Replace the ring gear pinion
gear or side gear
Replace the gear oil
W heel bearingWorn
Pinion shaft bearingWorn
W orn or chipped
W rong or poor grade gear oil
Ring gear, pinion gear or side
gear
Adjust the backlashDrive pinion to ring gear
backlashToo much or too little backlash
NG NG NG NG NG
OK OK
OK
OK
Oil level
Tighten or replaceDifferential bearingLoose or worn NG OK

FRONT WHEEL DRIVE 4C1-87
7. AUTOMATIC LOCKING FREE WHEEL HUB
(1) DOES NOT LOCK OR LOCKS ONLY ON ONE SIDE
Note :
1. Stop the vehicle
2. Shift the transfer lever to 4H or 4L
3. Now start driving the vehicle and the
hubs will lock automatically.
4. Once the hubs are locked, they will
remain locked, even if the transfer lever
is shifted from 4L or 4H into 2H, as long
as the vehicle travels in a same
direction.
Checkpoint Trouble Cause Countermeasure
ReplaceStill will not lock NGTry locking procedure once
more
(2) DOES NOT FREEWHEEL OR FREEWHEELS ONLY TO ONE SIDE
Note :
Freewheel operation
1. Stop the vehicle
2. Shift the transfer lever to 2H
3. Back up the vehicle for three or four feet;
this will disengage the front differential.
Checkpoint Trouble Cause Countermeasure
ReplaceStill will not freewheel
Driver the vehicle for five
minutes and then try the
freewheel procedure again
Still will not freewheel NGTry freewheel procedure once
more