manifold JAGUAR X308 1998 2.G Workshop Manual

            303‐01:  En gine  
                 Diagnos
is
 and  Testing  
                     Engine 
                     DTC P1392  VVT  solenoid  A circuit  low  input  
                     DTC P1397  VVT  solenoid  B circuit  low  input  
                     DTC P1393  VVT  solenoid  A circuit  high  input  
                     DTC P1398  VVT  solenoid  B circuit  high  input  
                     DTC P1396  VVT  solenoid  B malfunction  
                     Pinpoint test  A: P13
92 (P1397)  VVT  solenoid  circuit low  input  
                     Pinpoint test  B: P1393  (P1398)  VVT  solenoid  circuit high  input  
                     Pinpoint test  C: P1396  VVT  solenoid  malfunction  
                 In
‐Vehicle  Repair  
                     Connecting 
Rod Bearings  (12.17.16)  
                     Crankshaft 
Front Seal  Vehicles  Without:  Supe
rcharger  (12.21.14)  
                     Crankshaft 
Front Seal  Vehicles  With:  Supercharger  (12.21.14)  
                     Crankshaft 
Inner Sprocket  4.0L, Vehicles  Without:  Supercharger  (12.65.76) 
                     Crankshaft 
Inner Sprocket  3.2L (12.65.76)  
                     Crankshaft 
Outer Sprocket  (12.65.75)  
                     Crankshaft 
Pulley Vehicles  Without:  Supercharger  (12.21.09)  
                     Crankshaft 
Pulley Vehicles  With:  Supercharger  (12.21.09) 
                     Crankshaft 
Rear Seal  Vehicles  Without:  Supercharger  (12.21.20) 
                     Crankshaft 
Rear Seal  Vehic
les With:  Supercharger  (12.21.20)  
                     Cylinder 
Head LH  (12.29.02)  
                     Cylinder 
Head RH  (12.29.03)  
                     Engine
 Front  Cover  (12.65.01)  
                     Engine
 Front  Cover  Gasket  (12.65.04)  
                     Exhaust
 Camshaft  LH  (12.13.17)  
                     Exhaust
 Camshaft  RH  (12.13.15)  
                     Exhaust
 Camshaft  Sprocket  LH  4.0L,  Vehicles  Without:  Supercharger  (12.65.74) 
                     Exhaust
 Camshaft  Sprocket  LH  3.2L/4.0L,  Vehicles  With: Supercharger  (12.65.74)  
                     Exhaust
 Camshaft  Sprocket  RH  4.0L,  Ve
hicles  Without:  Supercharger  (12.65.73)  
                     Exhaust
 Camshaft  Sprocket  RH  3.2L/4.0L,  Vehicles With:  Supercharger  (12.65.73)  
                     Exhaust
 Manifold  LH  (30.15.55)  
Exhaust Manifold  RH  (30.15.56)  
Exhaust  Manifold  LH  and  RH  (30.15.57)  
Exhaust  Manifold  Gasket  LH  (30.15.58)  
Exhaust  Manifold  Gasket  RH  (30.15.59)  
Exhaust  Manifold  Gasket  LH  and  RH  (30.15.60)  

                    
                                                                                                      Flexplate
 Vehicles  With
out: 
Supercharger  (12.53.13) 
                     Flexplate
 Vehicles  With: Supercharger  (12.53.13)  
                     Intake
 Camshaft  LH  (12.13.16)  
                     Intake
 Camshaft  RH  (12.13.14)  
                     Intake
 Manifo
ld (30.15.01)  
                     Intake
 Manifold  Gaskets  (30.15.08)  
                     Intake
 Manifold  LH  (18.50.26)  
                     Intake
 Manifold  RH  (18.50.25)  
                     Intake
 Manifold  Gasket  LH  (18.50.28)  
                     Intake
 Manifold  Gasket  RH  (18.50.27)  
                     Oil
 Pan  (12.60.44)  
                     Oil
 Pan  Gasket  (12.60.38)  
                     Oil
 Pressure  Switch (88.25.07)  
                     Oil
 Pump  Vehicles  Without:  Supercharger  (12.60.26) 
                     Oil
 Pump  Vehicles  With: Supercharger  (12.60.26)  
                     Primary
 Timing  Chain  LH  4.0L,  Vehicles  Wit
hout:  Supercharger  (12.65.67) 
                     Primary
 Timing  Chain  LH  3.2L/4.0L,  Vehicles With:  Supercharger  (12.65.67)  
                     Primary
 Timing  Chain  RH  (12.65.66)  
                     Primary
 Timing  Chain  Inner  Guide  LH  (12.65.58)  
                     Primary
 Timing  Chain  Inner  Guide  RH  (12.65.60)  
                     Primary
 Timing  Chain  Outer  Guide  LH  (12.65.61)  
                     Primary
 Timing Chain  Outer  Gu
ide  RH  (12.65.57)  
                     Primary
 Timing  Chain  Tensioner  LH  (12.65.55)  
                     Primary
 Timing  Chain  Tensioner  RH  (12.65.54)  
                     Secondary
 Timing  Chain  LH  (12.65.69)  
                     Secondary
 Timing  Chain  RH  (12.65.68)  
                     Secondary
 Timing  Chain  Tensioner  LH  4.0L,  Vehicles  Without:  Supercharger   
           (12.65.64)
 
                     Secondary
 Timing  Chain  Tensioner  LH  3.2L/4.0L,  Vehicles  With: Supercharger  
           (12.65.64)
 
                     Secondar
y Timing  Chain  Tensioner  RH  4.0L,  Vehicles  Without:  Supercharger   
           (12.65.63)
 
                
                                                        
Secondar y Timing  Ch
ain
 Tensioner  RH  3.2L/4.0L,  Vehicles  With: Supercharger  
(12.65.63)  
Upper  Oil  Pan  3.2L  (12.60.48)  
Upper  Oil  Pan  4.0L,  Vehicles  Without:  Supercharger  (12.60.48) 
Upper  Oil  Pan  4.0L,  Vehicles  With: Supercharger  (12.60.48)  

                Removal and  Installation  
                     Fuel Injection  Supply  Manifo ld LH
 
(19.60.05)  
                     Fuel Injection  Supply  Manifold  RH  (19.60.04)  
                     Fuel Injection  Supply  Manifold  Pipe  (19.41.04)  
                     Fuel Injector  Vehicles  Without:  Supercharger  (18.10.01)  
                     Fuel Injector  Vehicles  With: Supercharger  (18.10.01) 
                     Fuel Injectors  Vehicles  With:  Supercharger  (18.10.02) 
                     Throttle Body  (19.70.04)  
                     Throttle Body  Gasket  (19.70.07)  
 
             303‐05:  Accessory  Drive  
                 Descriptio
n and  Operation  
                     Accessory Drive  
                 Removal and  Installation  
                     Accessory Drive  Belt (12.10.40)  ‐ 3.2L  NA  V8  ‐ AJ26/4.0L  NA  V8  ‐ AJ27  
                     Accessory Drive  Belt (12.10.40)  ‐ 4.0L  SC  V8 ‐ AJ26  
                     Accessory Drive  Belt Idler  Pulley  (12.10.43)  ‐ 3.2L  NA  V8  ‐ AJ26/4.0L  NA  V8  ‐ AJ27  
                     Accessory Drive  Belt  Idler  Pulle
y (12.10.43)  ‐ 4.0L  SC  V8 ‐ AJ26  
                     Accessory Drive  Belt Tensioner  (12.10.41)  ‐ 3.2L  NA  V8  ‐ AJ26/4.0L  NA  V8  ‐ AJ27  
                     Accessory Drive  Belt Tensioner  (12.10.41)  ‐ 4.0L  SC  V8 ‐ AJ26  
                     Supercharger  Belt  (18.50.08)  
                     Supercharger  Belt  Idler  Pulley  (18.50.09)  
                     Supercharger  Belt  Tensioner  (18.50.24)  
 
             303‐06:  Starting  System  
                 Description  and  Operati
on 
                     Starting System  
                 Diagnosis  and  Testing  
                     Starting System  
                 Inspection  and Verification  
                     Diagnostic Trouble  Code  (DTC)  Index  
                     Pinpoint Tests  
                 Removal and  Installation  
                     Starter Motor  (86.60.01)  
 
  

            303‐07:  En gine  Ignition
 
                 Specification  
                 Diagnosis  and  Testing  
                     Engine Ignition  
                 Diagnosis  and  Testing  
                     Engine Ignition  
                 Inspection  and Verification  
                     Driver Information  Chart  
                     Default mode Definitions  
                     Diagnostic Trouble  Code  (DTC)  index  
                     Pinpoint Tests  
                 Removal and  Installation  
                     Ignition Coil ‐On ‐Plug  LH  (18.20.44)  
                     Ignition Coil ‐On ‐Plug  RH  (18.20.43)  
                     Ignition Module  (18.20.30)  
                     Spark Plugs (18.20.02)  
 
             303‐08:  En
gine  Emission  Control  
                 Specification  
                 Diagnosis  and  Testing  
                     Engine Emission  Control  
                 Inspection  and Verification  
                     Diagnostic Trouble  Code  (DTC)  Index  
                     Pinpoint Tests  
                 Removal and  Installation  
                     Exhaust Gas  Recirculation  (EGR) Valve  (17.45.01)  
                     Exhaust Manifold  to  Exhaust  Gas  Recirculation  (E
GR)  Valve  Tube  (17.45.11)  
 
             303‐12:  Intake  Air  Distribution  and  Filtering  
                 Removal and  Installation  
                     Air Cleaner  (19.10.05)  
                     Air Cleaner  Element  (19.10.08)  
                     Charge Air  Cooler  LH  (18.50.19)  
                     Charge Air  Cooler  RH  (18.50.18)  
                     Charge Air  Cooler  Gasket  LH  (18.50.22)  
                     Charge Air  Cooler  Gasket  RH  (18.50.21)  
                     Supercharger  (18.50.
15) 

            310‐01:  Fu el Tank  and  Lines  
                 Removal and  Installation  
                     Fuel Level  Sensor  (88.25.32)  
                     Fuel Pump  (19.45.08)  
                     Fuel Tank  (19.55.01)  
 
             310‐02
:
 Acceleration  Control  
                 General Procedures  
                     Accelerator  Cable  Adjustment  (12.20.05)  
                 Removal and  Installation  
                     Accelerator  Cable  (19.20.06)  
 
             310‐03:  Speed  Control  
                 Diagnosis  and  Testing  
                     Speed Con
trol 
 
    4:  Electrical  
 
        412:  Climate  Control  System  
 
             412‐00:  Climate  Control  System  ‐ General  Information 
                 Specification  
                 Description  and  Operation  
                     Climate Control System  
                 Diagnosis  and  Testing  
                     Climate Control System  
                 General Procedures  
                     Air Conditioning  (A/C)  System  Check ‐  Retail Procedure  
                     Air Conditioning  (A/C)  System  Recovery,  Evacuation  and  Charging  (82.30.30)  
                     Contaminated  Refrigerant  Ha
ndling  
                     Manifold Gauge  Set Connection  
                     Refrigerant  Adding (82.30.02)  
                     Refrigerant  Oil Adding  
                     Refrigerant  System Tests  
 
             412‐01:  Air  Distribution  and  Filtering  
                 Description  and  Operation  

Safety Standard
Canister PurgeCANPControls pu
rging of the EVAP canister
Carbon dioxideCO2Colorless gas with

a density of a
pproximately 1.5 ti mes that of air
Carbon mon
oxide
COPoi
sonous gas produced as the re
sult of incomplete combustion
Case G
round
CSE GNDControl modu
le casing ground
Catal

ytic converter
In
-line exhaust system device used to reduce the level of engine exhaust
emissions
Ce
lsius
CSI ter
m for the Centigrade scale, with
freezing point at zero and boiling point
at 100°
Central
Processor Unit
CPUTh
e section of a computer that contai
ns the arithmetic, logic and control
circuits. It performs arithm etic operations, controls instruction processing, and
provides timing signals and other housekeeping operations
Cl
osed Loop
CL
Cl

osed Loop System
CLSControl
system with one
or more feedback loops
Col
umn/Mirror Control
Module
C/MC
M
Control ModuleCMA

self-contained group of electrical/electronic components, designed as a
single replaceable un it, and controlling one or more processes
Controll
er Area Network
CANA
communication system which allows control modules to be linked together
in a network.
Crankshaft Posi
tion
Sensor
CKPSGenerates crankshaft positi on informa
tion in conjunct
ion with the CKPTR (also
generates speed information in certain applications)
Crankshaft Posi
tion
Timing Ring
CKPT
R
Toothe
d ring which
triggers the CKPS
Crankcase Ventila
tion
System
CVSys
tem which scavenges camshaft cover and crankcase emissions and feeds
them into the inlet manifold
Cubic ce nt
imeter
cm
3
Curb weightWe

ight of vehicle with fuel, lubrican
ts and coolant, but excluding driver,
passengers or payload
D
Dat
a Link Connector
DLCConne
ctor providing access and/or control of the vehicle information,
operating conditions, and diagnostic information
De
gree
deg, °Angle or tempe
rature
D

epartment of
Transportation (US)
DO
T
D

epartment of Transport
(UK)
DTp
De
utsche In
stitut für
Normung
DINGerman stand
ards regulation body
Di

agnostic Module
DMSuppl
emental Restraint System (non-c
ontrolling) module for diagnostics
overview
Di
agnostic Test Mode
DTMA le
vel of capability in an OBD system.
May include different functional states
to observe signals, a base level to re ad DTCs, a monitor level which includes
information on signal levels, bi-directional control with on /off board aids, and
the ability to interface with remote diagnosis
Diagnostic Trouble CodeDTCAn al
pha/numeric identifier for a fault
condition identified by the On-Board
Diagnostic (OBD) system
D
ial test indicator
DTIA mechan
ical measuring
instrument, with a rotary indicating pointer
connected to a linear operating probe
D
ifferential pressure
Pressure di
fference betwee
n two regions e.g. between intake manifold and
atmospheric pressures
D
ifferential Pressure
Feedback EGR
DP
FE
An
EGR system that monito
rs differential EGR pressure across a remote orifice
to control EGR flow
D
irect current
dcCurrent which f
lows in on
e direction only, though it may have appreciable
pulsations in its magnitude
Du
al linear switch
DLSJ
-gate switch connected to the TCM on SC vehicles
E
EGR

Temperature EGRT
Sensor
EGRTSens
ing EGR function based on temperature change
EGR Vacu

um Regulator
EVRControls EGR
flow by changi
ng vacuum to the EGR valve
EGR Valve
Position
EVPAn EGR
system that direct
ly monitors EGR valve position to control EGR flow
Electrically E
rasable
Programmable Read-Only
Memory
EEP
ROM

High
tension (electrical)
ht
Hourh
Hydro

carbon
HC
I
Idl

e Air Control
IACEl
ectrical control of throttle bypass air
Idl

e Air Control Valve
IACVStepper motor dri
ven device which vari
es the volume of air by-passing the
throttle to maintain the programmed idle speed
Ignitionign
Ignition am
plifier
IAD
evice which amplifies the i
gniti
on system output
Ignition groundIGN GND
In

ertia Fuel Shut-off
IFSAn
inertia system that shuts off the fuel supply when activated by pre-
determined force limits brough t about by (e.g.) collision
In
ertia Fuel Shut-off
Switch
IFSSShut
s down fuel and ignition systems in the event of a vehicle impact
Inta

ke air
Air drawn t
hrough a cleaner and distri
buted to each cylinder for use in
combustion
InputI/PAn
electrical input signal to a controlling device
Inta

ke Air Temperature
IATTem
perature of intake air
Inta

ke Air Temperature
Sensor
IATSDe
vice used to measure IAT
Inta

ke Air Temperature
Sensor Ignition
IATSITherm
istor which signals the ECM to retard
the ignition timing in response to
high inlet air temperatures
Inta
ke Air Temperature
Sensor Injection
IATSFTher
mistor which inputs air density information to the ECM
Internal diameteri.

dia
Inte

rnational Standards
Organization
ISO
K
Kilogramme (mass)kg
Kilogram
me (force)
kg
f
Ki

logramme force per
square centimeter
kg
f/cm2
Kilom

eter
km
Ki

lometer per hour
km
/h
Kilopasc

al
kP
a
KilovoltkV
Knock

Sensor
KSSens
or which detects the onset of detonation, and signals the ECM to retard
the ignition
L
Le
ft-hand
LH
Left-hand drive veh

icle
LHD
Le

ft-hand thread
LH Thd
Ligh

t Emitting Diode
LEDLigh
t-emitting semiconductor diode used
in alphanumeric displays and as an
indicator lamp
Liqu
id Crystal Display
LCDOp
tical digital display system, applied voltage to which varies the way the
crystals reflect light, thereby modifying the display
LiterL
Low ten
sion
ltPrim
ary circuit of the ignition system, linking the battery to the primary
winding in the ignition coil
M
Malfu
nction Indicator
Lamp
MILA
required on-board indicator to aler
t the driver of an emission related
malfunction
Mani
fold Absolute
Pressure
MAPAbsolute pressure o
f the intake manifold air
Mani

fold Absolute
Pressure Sensor
MAPSSensor loca
ted in the ECM and
ported to the intake manifold
Manifol
d Surface
Temperature
MST
Mass Ai
r Flow
MAFSy
stem which provides inform
ation on the mass flow rate of the intake air to
the engine
Mass Ai
r Flow Sensor
MAFSHot-wi
re sensor which monitors air flow
into the intake manifold for fueling
and ignition control
Maxim
um
max.

Mem
ory
Pulse Width ModulationPW

M
A
method of control in an electronic co
ntrol system in which the duration of
pulses in a pulse train is proportional to the amplitude of the modulating
signal
R
Ran
dom Access Memory
RAMF
ast access memory store which is accessible for entry or extraction of data
Re

ad-Only Memory
RO
M
F
ast access memory in which data
is fixed and may not be changed
Re
servoir
RESContaine
r, usually for oils,
coolants or hydraulic fluids
Re
turn
RTNA
dedicated sensor ground circuit
R

evolutions Per Minute
RP
M
Shaft speed o
f a device, us
ually an engine or motor
R
ight-hand
RH
Right-hand drive veh

icle
RHD
S
Scan T

ool
STDe
vice that interfaces with and comm
unicates information on a data link
Se
at Control Module
SCMModule
controlling the seat motor systems (not electric raise/lower-only
seats)
Secon
dary Air
Air pro
vided to the exhaust system
Secon

dary Air Injection
AIRSy
stem used for a period of time each
time the engine is started, unless
certain temperature criter ia are met. Pumps air directly into the exhaust
system which generates extra heat and reduces the time taken for the
catalytic converters to reach operating temperature
Secon
dary Air Injection
Bypass
AIRBVents secon
dary air to atmosphere
Secon

dary Air Injection
Check Valve
AIRCValve wh
ich prevents back-flow of exhaust gas to the AIR system when the
system is inoperative
Secon
dary Air Injection
Diverter
AIRDD
iverts secondary air to either
the catalyst or exhaust manifold
Secon
dary Air Injection
Magnetic Clutch
AIRP
C
Clu
tch mounted on the AIRP drive shaft
Secon

dary Air Injection
Pump
AIRPMe
chanically driven rotary vane
pump, driven through the AIRPC
Secon
dary Air Injection
Relay
AIRRCont
rols the injection of air into the exhaust system
Secon

dary Air Injection
Switchin
g Va
lve
AIRSV
acuum operated valve backing-up the AIRC
Secu

rity and Locking
Control Module
SLCMModul
e controlling the vehicle's security and closure-locking functions
SensorSGeneri

c name for a device
that senses either the absolute value or a change
in a physical quantity su ch as temperature, pressure or flow rate, and
converts that change into an electrical quantity signal
Servic
e Repair Operation
(number)
SRONu
mber generated by Jaguar Methods
and Techniques system which relates
to the time allowed to complete a repair operation. Further information on the
system can be found in the separate Jaguar Publications (for each model
range) entitled 'Repair Operation Times'
Shif
t signal
SDA
shift process signal to the TCM on SC vehicles
Shif

t Solenoid
SSControls shi
fting in an automatic transmission
Si

gnal return
SIG RTN
Slidin

g Roof Control
Module
SRCM
Society of Automotive

Engineers
SAE
Speed
Control Control
Module
SCCMModule con
trolling Speed Control System
Square c

entimeter
cm
2
Stan

dard
std
Stan

dard Corporate
Protocol
SCPA
high-speed, serial communications system linking all body system control
modules. Control messages and data ar e passed between modules at up to
786 messages per second
SuperchargerSCAn in
take system which utilizes a supercharger (mechanically driven device
that pressurizes intake air, thereby in creasing density of charge air and the
consequent power output from a given displacement)
Supercharger
Bypass
SCB
SwitchSW
T

Comp
onent Tests
Bra
k
e Booster
1.
1. Chec k all
hoses and connections. All unused vacuum connectors should be capped. Hoses and their connections
should be correctly secured and in good condition with no holes and no collapsed areas. Inspect the valve on the
brake booster for damage.
2. 2. Check the hydraulic brake system for leaks or low fluid.
3. 3. With the transmission in PARK, stop the engine and apply the parking brake. Pump the brake pedal several times
to exhaust all vacuum in the system.
4. 4. With the engine switched off and all vacuum in the system exhausted, appl y the brake pedal and hold it down.
Start the engine. If the vacuum system is operating, the brake pedal will tend to move downward under constant
foot pressure. If no motion is felt, the vacuum booster system is not functioning.
5. 5. Remove the vacuum hose from the brake booster. Manifold vacuum should be available at the brake booster end
of the hose with the engine at idle speed and the transm ission in PARK or NEUTRAL. Make sure that all unused
vacuum outlets are correctly capped, hose connectors are correctly secured and vacuum hoses are in good
condition. When it is established that manifold vacuum is available to the brake booster, connect the vacuum hose
to the brake booster and repeat Step 3. If no downward movement of the brake pedal is felt, install a new brake
booster.
6. 6. Operate the engine for a minimum of 10 seconds at a fast idle. Stop the engine and allow the vehicle to stand for
10 minutes. Then, apply th e brake pedal with approximately 89 N ( 20lb) of force. The pedal feel (brake
application) should be the same as that noted with the engine running. If the brake pedal feels hard (no power
assist), install a new valve and then re peat the test. If the brake pedal still feels hard, in stall a new brake booster.
If the brake pedal movement feels spongy, bleed the brak e system. For additional information, refer to General
Procedures in this section.
Bra k
e Master Cylinder
Usual
l
y, the first and strongest
indicator of anything wrong in the brake syst em is a feeling through the brake pedal. In
diagnosing the condition of the brake master cylinder, check pedal feel as evidence of a brake concern. Check for brake
warning lamp illumination and the brake fluid le vel in the brake master cylinder reservoir.
Normal Conditio
ns
The fo
llowing conditions are considered norm
al and are not indications that the brake master cylinder is in need of repair.
New bra
ke systems are designed to produc
e a pedal effort that is not as hard as in the past. Complaints of light
pedal efforts should be compared to the pedal effort s of another vehicle of the same model and year.
The fl
uid level will fall with brake pad wear.
Abnormal Conditions
•

NOTE: Prior to carrying out any diag
nosis, make sure the brake system warning indicator is functional.
Changes in the brake pedal feel or brake pedal travel are in dicators that something could be wrong in the brake system. The
diagnostic procedure and techniques use brake pedal feel, warning indicator illu mination and low brake fluid level as
indicators to diagnosing brake system co ncerns. The following conditions are cons idered abnormal and indicate that the
brake master cylinder is in need of repair:
Brake ped a
l goes down fast. Th
is could be caused by an ex ternal or internal leak.
Brake pedal goes down slowly
. This could be
caused by an internal or external leak.
Brak
e pedal is low or feels spongy. This condition may be ca
used by no fluid in the brake master cylinder, reservoir

Power Brake Actuation - Brake Booster
Description and Operation


The brake b
ooster provides assi
stance by reinforcing the driver's effort when brakin g. The reinforced assistance
provided by the booster is proportional to the driver's effort applied to the brake pedal.
The brake force applied by
the driver is incr
eased by the booster in a ratio of 6.5:1.
Th
e vacuum used to operate the booster
is formed in the engine's intake manifold. The booster is connected to the
intake manifold by a hose.
The boost
er is fail-safe therefore, if a fault develops in
the vacuum unit, the braking system will still function.
However, the driver will have to apply a greater fo rce to the brake pedal to slow down the vehicle.


It e
m
Par
t
Number
De
scr
iption
1—Mas
t
er Cylinder / Reservoir - refer to 206-06
2—Booster

3—Pedal Box
- refer to 206-06
4—Vacuu
m
Hose
5—No
n
-Return Valve