lock JAGUAR XFR 2010 1.G Workshop Manual

NOTE: Unlocked position shown 3 Confirm that the latch interior release lever is in the unlocked position as shown

4 Whilst the latch is still in its unlocked state, push the latch interior release lever against its return spring, whilst
simultaneously applying a light pressure to release the latch
claw using a small screw driver or similar Does the latch claw release? Yes
Latch has passed all tests to confirm its correct function. DO
NOT REPLACE LATCH as part of any attempts to resolve any
locking functionality issues
No
Repeat test GO to C7. If repeat test has confirmed that the interior release lever will not release the claw when the latch is
in the unlocked state, then replace the latch. If replacing latch
as part of a warranty claim, please quote reference code
INTINOP in the technician comments section of the warranty
claim
PINPOINT TEST D : LATCH MOUNTED DOOR AJAR SWITCH TEST TEST CONDITIONS DETAILS/RESULTS/ACTIONS D1: TEST 4 DOOR LATCH NOTES:


If a customer is complaining of issues relating to a door ajar signal e.g. door latch won’t lock, or alarm system triggering
(indicated via DTC’s), there may be several components that generate the fault, including www.JagDocs.com

Published: 11-May-2011
Handles, Locks, Latches and Entry Systems - Door Lock Cylinder Cover
Removal and Installation

Removal


1. CAUTION: Make sure that excessive force is not used.
Failure to follow this instruction may result in damage to
the vehicle.
































2.

3.
Installation


1. CAUTION: Make sure that the door lock cylinder cover
is pushed firmly in the sequence shown to install all 3 clips,
and that the door lock cylinder cover is securely attached to
the vehicle. Failure to follow this instruction may result in
damage to the vehicle.

Published: 11-May-2011
Handles, Locks, Latches and Entry Systems - Exterior Front Door Handle
Removal and Installation

Removal


NOTE: Removal steps in this procedure may contain installation details.


1. NOTE: Remove the screw sufficiently, only to release
the component.
Torque: 4 Nm












2. NOTE: Some variation in the illustrations may occur,
but the essential information is always correct. www.JagDocs.com

Published: 11-May-2011
Handles, Locks, Latches and Entry Systems - Exterior Luggage Compartment Lid Release Switch
Removal and Installation

Removal

All vehicles

NOTE: Removal steps in this procedure may contain installation details.

1. Refer to: Luggage Compartment Lid Trim Panel (501-05 Interior Trim and Ornamentation, Removal and Installation).

2.
3. Torque: 3 Nm 4.

Published: 11-May-2011
Handles, Locks, Latches and Entry Systems - Exterior Rear Door Handle
Removal and Installation

Removal


NOTE: Removal steps in this procedure may contain installation details.


1. NOTE: Remove the screw sufficiently, only to release the
component.
Torque: 4 Nm












2. NOTE: Some variation in the illustrations may occur,
but the essential information is always correct. www.JagDocs.com

Handles, Locks, Latches and Entry Systems - Front Door Latch
Removal and Installation

Removal Published: 04-Feb-2013

1. Refer to: Front Door Window Glass (501-11 Glass, Frames and Mechanisms, Removal and Installation).


2. NOTE: Left-hand shown, right-hand similar.

Refer to: Exterior Front Door Handle (501-14 Handles, Locks, Latches and Entry Systems, Removal and Installation).

3. Refer to: Front Door Trim Panel (501-05 Interior Trim and Ornamentation, Removal and Installation).


4. NOTE: Right-hand shown, left-hand similar.

Published: 11-May-2011
Handles, Locks, Latches and Entry Systems - Front Door Lock Cylinder
Removal and Installation

Removal


NOTE: Removal steps in this procedure may contain installation details.


1.





























2. NOTE: Remove the screw sufficiently, only to release
the component.
Torque: 4 Nm

Published: 11-May-2011
Handles, Locks, Latches and Entry Systems - Luggage Compartment Lid Latch
Actuator
Removal and Installation

Removal


NOTE: Removal steps in this procedure may contain installation details.

1. Refer to: Luggage Compartment Lid Lock Cylinder (501-14 Handles, Locks, Latches and Entry Systems, Removal and Installation).




Installation

2. Torque: 20 Nm
1. To install, reverse the removal procedure.

Published: 11-May-2011
Handles, Locks, Latches and Entry Systems - Luggage Compartment Lid Lock Cylinder
Removal and Installation

Removal


NOTE: Removal steps in this procedure may contain installation details.

1. Refer to: Luggage Compartment Lid Trim Panel (501-05 Interior Trim and Ornamentation, Removal and Installation).

2.
3. Torque: 3.2 Nm