low beam KIA OPTIMA 2020 Features and Functions Guide

KIA OPTIMA 2020 Features and Functions Guide OPTIMA 2020 KIA KIA https://www.carmanualsonline.info/img/2/55014/w960_55014-0.png KIA OPTIMA 2020 Features and Functions Guide

Page 201 of 591

KIA OPTIMA 2020  Features and Functions Guide 4111
Features of your vehicle
Headlight leveling device 
(if equipped)
Automatic type
To ensure the proper headlight beam
is used under various conditions, the
headlight beam levels are automati-
call

Page 455 of 591

KIA OPTIMA 2020  Features and Functions Guide Climate control air filter . . . . . . . . . . . . . . . . . . . . 7-36
• Filter inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-36
Wiper blades . . . . . . . . . . . . . .

Page 533 of 591

KIA OPTIMA 2020  Features and Functions Guide Maintenance
80
7
Light bulb position (Side)
(1) Side repeater lamp (LED type)
Headlamp (Low beam) bulb
replacement (Headlamp Type A)
1. Open the hood.
2. Remove the headlamp bulb cover
by turning it c

Page 534 of 591

KIA OPTIMA 2020  Features and Functions Guide 781
Maintenance
Headlamp bulbHeadlamp (High beam) bulb
replacement (Headlamp Type A)
1. Open the hood.
2. Remove the headlamp bulb coverby turning it counterclockwise.
3. Disconnect the headlamp bulb

Page 535 of 591

KIA OPTIMA 2020  Features and Functions Guide Maintenance
82
7
5. Install a new bulb-socket assem-
bly in the headlamp assembly by
aligning the tabs on the bulb-sock-
et with the slots in the headlamp
assembly. Push the bulb-socket
into the headl

Page 582 of 591

KIA OPTIMA 2020  Features and Functions Guide I7
Index
Front seat adjustment - power . . . . . . . . . . . . . . . . . . . . 3-9
Front seat adjustment-manual. . . . . . . . . . . . . . . . . . . . . 3-7
Front turn signal lamp bulb replacement (He

Page 584 of 591

KIA OPTIMA 2020  Features and Functions Guide I9
Index
LabelTire sidewall labeling . . . . . . . . . . . . . . . . . . . . . . . . 7-50
Vehicle certification label . . . . . . . . . . . . . . . . . . . . . 8-11
Tire specification and pressure lab
Page:   < prev 1-10 11-20