KIA OPTIMA HYBRID 2017 Quick Reference Guide

28
Favorites
Press the PHONE key, and then
Favorites.
NameDescr\fpt\fon
Favor\ftes
L\fsts the phone
numbers saved as
Favor\ftes. \belect
from the l\fst to d\f\cal
the number.
Add NewAdds a new number
to Favor\ftes.
Delete ItemsDeletes numbers
that you select from
Favor\ftes.
Delete All
Deletes all of the\c
numbers from
Favor\ftes.
Bluetooth

29
Pr
for Successful V
Recognition
1. Vo\fce recogn\ft\fon supports only
the commands that are d\fsplayed
on the screen and wr\ftten \fn the
User’s Gu\fde.
2. To ensure the correct recogn\ft\fon
and execut\fon of your command,
say your command when you hear
the beep after a v\co\fce prompt.
3. Vo\fce recogn\ft\fon automat\fcally
ends \ff: 1) A call \fs \fncom\fng\c or outgo\fng
2) A med\fa dev\fce (U\bB or \fPod, etc.)
\fs connected or d\fsco\cnnected
3) The rear v\few camera \fs oper ated
4) The car eng\fne star\cts or stops
5) A system key, such as RADIO
key or
MEDIA key \fs selected

4. The m\fcrophone used for the vo\fce
recogn\ft\fon system \fs located \fn the
headl\fner d\frectly above the dr\fver’s
head. To make your commands
better understood, keep your body
stra\fght \fn the dr\fver’s seat when
speak\fng the comman\cd.
5. \bpeak\fng naturally and clearly w\fll
ensure better recogn\ft\fon of your
vo\fce commands.
6. In the follow\fng cases vo\fce rec-
ogn\ft\fon w\fll be affected by amb\f -
ent no\fse.
1) The sound of the w\fnd \ff any
w\fndow or the sun roof \c\fs open.
2) H\fgh speed blower from the
a\fr vents. \bet cl\fmate control to
blow lower than level 3.
3) V\fbrat\fons from pass\fng\c through
a tunnel.
4) V\fbrat\fons from dr\fv\fng on an
uneven road.
5) \btorms and heavy ra\fn.
V

30
Starting/Ending
and Setting V
Recognition
Starting Voice Recognition
Press the key br\fefly (less
than 0.8 seconds) on the steer\fng
wheel control to act\fvate vo\fce rec -
ogn\ft\fon.
\bnding Voice Recognition
1. \belect “Ex\ft” to the left of the bot-
tom to end vo\fce recogn\ft\fon.
2. Press and hold (more than 0.8
seconds) the key on the
steer\fng wheel control to end
vo\fce recogn\ft\fon.
V

31
Skipping Prompt
Messages
When you hear the prompt mes-
sage, press the
key on the
steer\fng wheel control to sk\fp the
message and go d\frectly to l\fsten\fng
mode to say your command.
Th\fs results \fn faster operat\fon when
you feel the message \fs too long or
you already know the command to
use.
i Information
• Refer to Part 9 for \fnstruct\fons on how to
change the Vo\fce Recogn\ft\fon \bett\c\fngs.
Combining Voice
Recognition with
On-Screen Commands
After press\fng the key, say
a command after the beep. The
vo\fce recogn\ft\fon syste\cm w\fll execute
the des\fred operat\fon after under -
stand\fng the comman\cd.
Alternat\fvely, you may touch any
of the correspond\fng Commands
on the screen wh\fle the Vo\fce
Recogn\ft\fon system \fs\c \fn operat\fon.

Comb\fn\fng vo\fce recogn\ft\fon w\fth
ava\flable on-screen commands
\fs useful when the system \fs tak -
\fng longer than expected or the
vo\fce command d\fd not execute as
des\fred.

32
V
Start Screen
NameDescr\fpt\fon
Representat\fve
CommandsD\fsplays the representat\fv\ce commands.
Not ava\flable
command D\fsplays commands that are not ava\flable due to a fa\flure \fn
meet\fng the cond\ft\fons for us\fng them and thus need add\f-
t\fonal sett\fngs. The cond\ft\fons requ\fred for us\fng them w\fll
be descr\fbed br\fefly under each comm\cand.
Vo\fce
recogn\ft\fon
status \fcons \btandby Vo\fce gu\fdance Vo\fce command process\c
Recogn\fzed results D\fsplays the vo\fce recogn\ft\fon resu\clt.
User's speak\fng volume be\fng
recogn\fzedD\fsplays the vo\fce command volume \fn real t\fme.
HelpD\fsplays all ava\flable help commands \fn\c a tree format.
Ex\ft
Ends the vo\fce recogn\ft\fon.
V

33
V
Types of Commands
Vo\fce recogn\ft\fon commands are class\ff\fed as “Global Commands” and “Local
Commands.”
1. Global Commands (
052C): Commands that can be used \fmmed\fately after act\f-
vat\fng vo\fce recogn\ft\fon.
2. Local Commands (
052A): Commands that can be used when a mult\fmed\fa or
Bluetooth funct\fon \fs runn\fng, or d\fsplayed on the screen, after act\fvat\fng
vo\fce recogn\ft\fon.
Call Commands
* Check the follow\fng before us\fng call comma\cnds:
1. Vo\fce commands related to phone calls can be used after connect\fng a
Bluetooth dev\fce.
2. To call a person, for example “Call ” whose name \fs l\fsted \fn
Contacts, you must f\frst download the Contacts l\fst. For deta\fls on down -
load\fng contacts, see “Part 4. Bluetooth > Chapt\cer 3. Bluetooth Phone >\c 4.10
Contacts”.
3. After download\fng the Bluetooth contacts, \ft w\fll take some t\fme to convert
the Contacts \fnto vo\fce data dur\fng wh\fch t\fme you cannot make a call by
name yet. The t\fme \ft takes to convert vo\fce data may vary depend\fng on
the number of Contacts d\cownloaded on the ph\cone.

34
CommandOperat\fon
052CCallD\fsplays downloaded Contacts, after th\fs you can make
a call by say\fng the name.
052CCall You can d\frectly call a person by \fn the down-
loaded Contacts.
052CCall on
Mob\fleYou can call a person d\frectly to the number
that \fs saved as “Mob\fle” \fn the downloaded Contacts.
e.g.) Call “John \bm\fth” on Mob\fle
052CCall at
WorkYou can call a person d\frectly to the number
that \fs saved as “Work” \fn the downloaded Contacts.
e.g.) Call “John \bm\fth” at Work
052CCall at
HomeYou can call a person d\frectly to the number
that \fs saved as “Home” \fn the downloaded Contacts.
e.g.) Call “John \bm\fth” at Home
052CCall on
OtherYou can call a person d\frectly to the number
that \fs saved as “Other” than “Mob\fle, Home, or Work” \fn
the downloaded Contacts.
e.g.) Call “John \bm\fth” on Other
052CD\fal Number
D\fsplays a screen where you can say a phone number
to d\fal.
052CD\fal You can d\frectly say the number to call.
e.g.) D\fal 111 555 1\c234
052CRed\fal
D\frectly calls at the\c number that you last d\faled.
052CCall H\fstoryD\fsplays your Call H\fstory, where you can say the l\fst
number to make a call.
V

35
Radio Commands
CommandOperat\fon
052CRad\foPlays the most recent rad\fo channels from FM, AM, and
\b\fr\fusXM™.
052CFM
Plays FM rad\fo.
052CFM
<87.5~107.9>Tunes to FM accord\fng t\co what you say.
e.g.) FM 87.5: FM e\fghty seven po\fnt f\fve
052C\b\fr\fusXM
Plays \b\fr\fusXM™ rad\fo.
052C\b\fr\fusXM
<0~999>Tunes to \b\fr\fusXM™ Channel accord
-
\fng to what you say.
e.g.) \b\fr\fusXM 23: \b\fr\fusXM Twenty three
052CAM Plays AM rad\fo.
052CAM
<530~1710>Tunes to AM accord\fng t\co what you say.
e.g.) AM 530: AM F\fve th\frty
052APreset <1~40>
Tunes to your preset stat\fons\c (1 to 40).
052AChannel
<0~999>In \b\fr\fusXM™ Rad\fo mode, turns on the Number> that you say.

36
Media Commands
* Check the follow\fng before you use med\fa comman\cds.
1. If no med\fa \fs connected or \ff no playable f\fles ex\fst at the t\fme when you
use these commands, a vo\fce message w\fll te\cll you that th\fs \fs not\c ava\flable.
2. If you say the name of the med\fa that \fs currently play\fng aga\fn, then that
med\fa w\fll cont\fnue play\fng.
e.g.) \bay\fng “U\bB” wh\fle U\bB content \f\cs play\fng.
CommandOperat\fon
052CMus\fcCont\fnues the last med\fa \cyou played.
052C\fPodPlays the \fPod currently connected. Th\fs w\fll work the
same when an \fPhone \fs connected. If a U\bB \fs con
-
nected, then \ft w\fll\c be played \fnstead of the \f\cPod.
052CU\bB Plays the mus\fc on the U\bB curr\cently connected.
If an \fPod \fs connected, then the \fPod w\fll be played
\fnstead of the U\bB.
052CBluetooth Aud\foPlays the mus\fc on the Bluetooth phone currently con
-
nected.
Th\fs may not be supported depend\fng on the Bluetooth
connect\fon status.
052CAUX Plays external dev\fces that are curre\cntly connected.
052CMy Mus\fcPlays My Mus\fc f\fles sto\cred \fn the system.
052CPandora Rad\foPlays Pandora Rad\fo that \fs curr\cently connected.
1. U\bB Mus\fc/\fPod/My Mus\fc Command
Command Operat\fon
052APlayPlays a selected f\fle.
Ma\fnta\fns the curren\ct sett\fngs dur\fng playback.
052APausePauses a f\fle that \f\cs play\fng.
Ma\fnta\fns current se\ctt\fngs wh\fle paused\c dur\fng playback.
052A\bhufflePlays tracks or f\fles randomly.
Ma\fnta\fns current se\ctt\fngs dur\fng shuffled playback.
052A\bhuffle OffCancels \bhuffle and\c plays tracks sequent\fally.
Ma\fnta\fns current se\ctt\fngs dur\fng sequent\fal playback.
052ARepeatPlays the current track or f\fle repeatedl\cy.
Ma\fnta\fns the curren\ct sett\fngs dur\fng repeat playback.
052ARepeat OffCancels Repeat and \cplays mult\fple tracks or f\fles.
Ma\fnta\fns current se\ctt\fngs dur\fng mult\fple track playback.
V

37
2. Pandora Rad\fo Command
CommandOperat\fon
052A\bk\fpMoves to the next track.
052AThumbs upIf you l\fke the genre of the mus\fc currently play\fng, say
“Thumbs up” so that more s\fm\fl\car mus\fc w\fll play.
052AThumbs downIf you don’t l\fke the mus\fc currently play\fng, say “Thumbs
down” to m\fn\fm\fze the number of playbacks of s\fm\flar
genre mus\fc.
052APlay
Plays a selected f\fle.
Ma\fnta\fns the curren\ct sett\fngs dur\fng playback.
052APausePauses a f\fle that \f\cs play\fng.
Ma\fnta\fns current se\ctt\fngs wh\fle paused\c dur\fng playback.
052A\bhufflePlays tracks or f\fles randomly.
Ma\fnta\fns current se\ctt\fngs dur\fng shuffled playback.
3. Bluetooth aud\fo/AUX Command
For Bluetooth aud\fo and external dev\fces (AUX), local commands are unava\fl-
able, \fnclud\fng Play, Pause, Repeat and \bhuffl\ce.
UVO eServices Commands List
Command
Operat\fon
052CRoads\fde Ass\fstConnect w\fth a Road\cs\fde Ass\fst agent.
052CVeh\fcle
D\fagnost\fcsInforms you \ff d\fagnost\fc \fssu\ces are found \fn your veh\fcle
052Ce\berv\fce Gu\fde
Prov\fdes gu\fdance on ho\cw to use UVO e\berv\fces